• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.167-167
• /
• 2010

Indium tin oxide (ITO) has been widely used as transparent conductive oxides (TCOs) for transparent electrodes of various optoelectronic devices, such as liquid crystal displays (LCD) and organic light emitting diodes (OLED). However, indium has become increasingly expensive and rare because of its limited resources. In addition, ITO thin films have some problems for OLED and flexible displays, such as imperfect work function, chemical instability, and high deposition temperature. Therefore, multi-component TCO materials have been reported as anode materials. Among the various materials, IZTO thin films have been gained much attention as anode materials due to their high work function, good conductivity, high transparency and low deposition temperature. IZTO thin films with a thickness of 200nm were deposited on Corning glass substrate at different substrate temperature by pulsed DC magnetron sputtering with a sintered ceramic target of IZTO (In2O3 70 wt%, ZnO 15 wt%, SnO2 15 wt%). We investigated the electrical, optical, structural properties of IZTO thin films. As the substrate temperature is increased, the electrical properties of IZTO are improved. All IZTO thin films have good optical properties, which showed an average of transmittance over 80%. These IZTO thin films were used to fabricate organic light emitting diodes (OLEDs) as anode and the device performances studied. As a result, IZTO has utility value of TCO electrode although it reduced indium and we expect it is possible for the IZTO to apply to flexible display due to the low processing temperature.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.168-168
• /
• 2010

Transparent conduction oxides (TCOs) films is extensively reported for optoelectronic devices application such as touch panels, solar cells, liquid crystal displays (LCDs), and organic light emitting diodes(OLEDs). Among the many TCO film, indium tin oxide(ITO) is in great demand due to the growth of flat panel display industry. However, indium is not only high cost but also its deposits dwindling. Therefore, many studies are being done on the transparent conductive oxides(TCOs). We fabricated a target of IZTO(In2O3:ZnO:SnO2=70:15:15 wt.%) reduced indium. Then, IZTO thin films were deposited on glass substrates by pulsed DC magnetron sputtering with various oxygen flow ratio. The substrate temperature was fixed at the room temperature. We investigated the electrical, optical, structural properties of IZTO thin films. The electrical properties of IZTO thin films were dependent on the oxygen partial pressure. As a result, the most excellent properties of IZTO thin films were obtained at the 3% of oxygen flow rate with the low resistivity of $7.236{\times}10^{-4}{\Omega}cm$. And also the optical properties of IZTO thin films were shown the good transmittance over 80%. These IZTO thin films were used to fabricated organic light emitting diodes(OLEDs) as anode and the device performances studied. The OLED with an IZTO anode deposited at optimized deposition condition showed good brightness properties. Therefore, IZTO has utility value of TCO electrode although it reduced indium and we expect it is possible for the IZTO to apply to flexible display due to the low processing temperature.

• 한국안광학회지
• /
• 제7권2호
• /
• pp.163-167
• /
• 2002

$Ni(OH)_2/Ni$ Glass 박막에서 전기변색 속도 개선에 대한 연구를 수행하였다. 이는 선글라스의 변색속도가 수분 이상 소요되는 단점을 해결하고자 e-beam evaporator를 이용하여 니켈 금속 박막을 증착시킨 후, 전기화학적 산화-환원 반응으로 $Ni(OH)_2$에 대한 전기변색 특성을 연구하였다. 전기전도성을 갖는 ITO 에서보다 Glass 위에서의 $Ni(OH)_2$의 변색 속도가 오히려 빠르다. 이는 전위와 투과율을 측정함으로서 알 수 있다. XPS를 이용하여 Glass와 $Ni(OH)_2$ 사이의 초박막(${\sim}10{\AA}$) Ni 금속의 존재를 확인하였고, 이 나노 박막은 전기변색 장치의 응답 속도에 영향을 마쳤다. 기존의 선글라스가 5분 정도 소요되는 반면 니켈 나노 박막을 이용한 변색소자에서는 1~2초 정도 소요된다. 이론적으로는 수 ms 이내이지만 전기적 저항으로 인해 초 단위의 응답속도를 보이고 있다.

• 한국레이저가공학회지
• /
• 제14권2호
• /
• pp.17-23
• /
• 2011

Active thin films are ubiquitous in the manufacture of all forms of flat panel display (FPD). One of the most widely employed thin films is indium tin oxide (ITO) and metal films used electrically conductive materials in display industries. ITO is widely used for fabrication of LCD, OLED device, and many kinds of optical applications because of transparency in visible range and its high conductivity and metal films are also widely employed as electrodes in various electric and display industries. It is important that removing specific area of layer, such as ITO or metal film on substrate, to fabricate and repair electrode in display industries. In this work, we demonstrate efficient selective ablation process to ITO and aluminum film on glass using a femtosecond laser (${\lambda}p=1025nm$) respectively. The femtosecond laser with wavelength of 1025nm, pulse duration of 400fs, and the repetition rate of 100kHz was used for selectively removing ITO and Al on glass in the air. We can successfully remove the ITO and Al films with various pulse energies using a femtosecond laser.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.6-8
• /
• 2005

The optical and electrical properties of indium tin oxide (ITO) thin films deposited at room temperature can be substantially enhanced by adopting a two-step process. In the first step, the films (50 nm thick) were grown by pulsed laser deposition (PLD) on glass substrate at room temperature and quickly annealed at $400^{\circ}C$ in nitrogen ambient for 1 minute by using rapid thermal annealing method. The process was completed by additional deposition (150 nm thick) on annealed film at room temperature. High quality ITO films grown by two-step process at room temperature could be obtained with the resistivity of $3.02{\times}10^{-4}{\Omega}cm$, the carrier mobility of 32.07 $cm^2/Vs$, and the transparency above 90 % in visible region mainly due to the enhancement of the film crystallinity and the increase of grain size.

• 한국광학회지
• /
• 제22권2호
• /
• pp.90-95
• /
• 2011

본 논문에서는 액정 디스플레이의 구현에 있어서 필수적인 필름인 편광판에 ITO를 증착하여 기존 액정 디스플레이에서 두께의 대부분을 차지하는 유리기판을 제거함으로써 경략 박형 액정 셀을 구현하였다. 저온($40^{\circ}C$)에서 편광판에 sputtering으로 buffer layer와 ITO를 증착하여 높은 투과율과 낮은 비저항 및 편평도를 확보하였다. 최종적으로 저온공정이 가능한 ion-beam 배향법을 이용하여 액정을 배향하고 액정 셀을 제작하고 전기광학특성을 확인하였다.

• 한국표면공학회지
• /
• 제31권3호
• /
• pp.171-176
• /
• 1998

Transparent conducting ITO (Indium Tin Oxide) thin films were prepared on soda lime glass by reactive dc magnetron sputtering mothod. The maaterial properties were measured by the X-ray diffraction meter (XRD) and atomic force microscopy (AFM) scanning. As a resuIts, the (400) park for $O_2 gas rate 2% grows uniquely as the preferred orientaon. However, the (400) peak exists at $O_2 gas rate 5% as well as the (222) peak appears abruptly as the main orietation. Both <100> and <111> grain alignments are consisted simultaneously in the XRE pattern of ITO thin films. The electrical charcteristics were esimated by the electrical resistivity, optical transmission, and Hall mobillty, ect. The resistivity of ITO thin film deposited at 4cm from the substrate center is increased from $2\times10^-4$ to $8\times10^-4\Omega$cm as a function of $O_2$ gas pressure (0~5%). The optical transmission curves with a rising of $O_2$ gas rate become shifted into longer wavelength range.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.309-312
• /
• 2007

Sputter deposition followed by surface treatment was studied using reactive RF plasma as a method for preparing titanium oxide($TiO_{2}$) films on indium tin oxide(ITO) coated glass substrate for dye-sensitized solar cells(DSSCs). Anatase structure $TiO_{2}$ films deposited by reactive RF magnetron sputtering under the conditions of $Ar/O_{2}$(5%) mixtures, RF power of 600W and substrate temperature of $400^{\circ}C$ were surface-treated by inductive coupled plasma(ICP) with $Ar/O_{2}$ mixtures at substrate temperature of $400^{\circ}C$, and thus the films were applied to the DSSCs, The $TiO_{2}$ Films made on these exhibited the BET specific surface area of 95, the pore volume of $0.3cm^{2}$ and the TEM particle size of ${\sim}25$ nm. The DSSCs made of this $TiO_{2}$ material exhibited an energy conversion efficiency of about 2.25% at $100mW/cm^{2}$ light intensity.

• Bulletin of the Korean Chemical Society
• /
• 제32권3호
• /
• pp.847-851
• /
• 2011

This study examined In-Zn-Sn-O (IZTO) films deposited on glass substrates by pulsed DC magnetron sputtering with various substrate temperatures. The structural, electrical, optical properties were analyzed. Xray diffraction showed that the IZTO films prepared at temperatures > $150^{\circ}C$ were crystalline which adversely affected the electrical properties. Amorphous IZTO films prepared at $100^{\circ}C$ showed the best properties, such as a low resistivity, high transmittance, figure of merit, and high work function of $4.07{\times}10^{-4}\;{\Omega}$, 85%, $10.57{\times}10^{-3}\;{\Omega}^{-1}$, and 5.37 eV, respectively. This suggests that amorphous IZTO films deposited at relatively low substrate temperatures ($100^{\circ}C$) are suitable for electrode applications, such as OLEDs as a substitute for conventional crystallized ITO films.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.299-299
• /
• 2013

Indium Tin Oxide (ITO) has widely been used as a transparent conductive oxide (TCE) for photovoltaic devices. Lately, flexibility of ITO becomes an issue as demand of flexible device increases. Several scientists have tried to substitute ITO to different materials such as conductive polymer, graphene, CNT, and metal nanowire because of ITO brittleness. Among the substitute materials, PEDOT:PSS has mostly paid attention because PEDOT:PSS has excellent flexibility and good conductivity. The conductivity of PEDOT:PSS increases up to 1000 S/cm with additives such as DMSO, EG, sorbitol, and so on. In our research group, we introduce a conductive polymer PEDOT:PSS as a buffer layer to improve not only flexibility but also conductivity. As PEDOT:PSS layer forms beneath ITO thin film (20 nm), sheet resistance decreases from $230{\Omega}$/${\Box}$ to $85{\Omega}$/${\Box}$ and crack initiation decreases from 4.5 mm to 3.5 mm as well. We have fabricated organic photovoltaic device and power conversion efficiencies using conventional ITO electrode and ITO/PEDOT:PSS hybrid electrode. The photovoltaic property such as power conversion efficiency for ITO/PEDOT:PSS hybrid electrode is comparable to the value obtained using conventional ITO electrode on glass substrate.