• Title/Summary/Keyword: Indirect reduction

Search Result 274, Processing Time 0.024 seconds

A Study on Heat Transmission Through Roof Materials for Amimal Structures (축사용 지윤재료의 복사열전달에 관한 연구)

  • 장희대;김문기고재군
    • Magazine of the Korean Society of Agricultural Engineers
    • /
    • v.19 no.4
    • /
    • pp.4544-4554
    • /
    • 1977
  • The objective of this study was to measure and compare the radiation heat load generated through a few chosen shade-materials that would protect animals from the direct solar radiation heat in summer condition. The results obtained from this study are as follows; 1. when the materials were used in original state, the most effective material for radiation heat reduction was slate, followed by aluminum and galvanized steel successively. 2. The radiation heat load under the white top and black underside aluminum was 2.5 Cal. per hour per square cm less than that under the bare aluminum of their diurnal peak. 3. When the modified galvanized steel was used, the radiation heat load was reduced as much as 2.4 cal per hour per square cm by attaching plywood under the galvanized steel, 3.9 cal per hour per square cm by attaching plywood and coating white paint on the top of the galvanized steel. The galvanized steel covered by hay material showes similar result as that of the galvanized steel lined with plywood. 4. In case of slate, the radiation heat reduction value was increased by using bare slate, white top slate and white-top-black-underside slate in the descending order. 5. The calculated value of radiosity of inside surface of aluminum was about 20 percent of the radiation heat load, the reduced value of radiosity by coating paint was considered to be indirect indication of the effect of total radiation heat load reduction of painted surface. 6. About an hour of the time lag of radiation heat load peak on sept. 10 for slate materials should be investigated more comprehensively in future.

  • PDF

Diagnosis and Treatment of Occult Lisfranc Injury (족근 중족 관절 잠재의 손상에 대한 진단 및 치료)

  • Chung, Hyung-Jin;Park, Jae-Gu;Kam, Min-Cheol
    • Journal of Korean Foot and Ankle Society
    • /
    • v.17 no.1
    • /
    • pp.34-39
    • /
    • 2013
  • Purpose: To evaluate the effectiveness of intraoperative stress test for diagnosis of occult Lisfranc injury. Materials and Methods: Between April 2009 and October 2012, 21 patients with occult Lisfranc injuries underwent intraoperative stress test and internal fixation. There were 11 males and 10 females with an average age of 45.3 years (range, 23~79 years). Injuries were caused by traffic accident in 10 cases, indirect force (twisting injury) in 8 cases, and crush in 2 cases, falling from a height in 1 case. Unstable injuries on stress radiograph in occult injury of Lisfranc joint were treated by open reduction or closed reduction and fixation with cannulated screw or K-wire. Radiological evaluation was assessed according to preoperative and postoperative diastasis between $1^{st}$ and $2^{nd}$ metatarsal base. Results: Assoicated injuries were 9 cases of metatarsal fractures, 6 cases of cuneiform fractures and 6 cases of both metatarsal and cuneiform fractures. Medial and middle column fixation was in 13 cases, and three columns fixation was in 8 cases. Initial diastasis between $1^{st}$ and $2^{nd}$ metatarsal base was 2.8 mm (1.3~4.7 mm) on AP radiograph and postoperative diastasis between $1^{st}$ and $2^{nd}$ metatarsal base was 1.2 mm (0.5~2.4 mm) on AP radiograph. Conclusion: Even there is no sign of clear Lisfranc injury, it is necessary to pay attention and give evaluation on circumstances of occult Lisfranc injuries with metatarsal or cuneiform fractures. Intraoperative stress test is helpful to diagnose an occult Lisfranc injury. For unstable injuries on stress radiographs of occult Lisfranc joint injury, operative treatment with open or closed reduction and internal fixation is useful method.

The Impact of Digitalization on the Forms Change of Employment and the Labor Market in the Context of the Information Economy Development

  • Popelo, Olha;Kychko, Iryna;Tulchynska, Svitlana;Zhygalkevych, Zhanna;Treitiak, Olha
    • International Journal of Computer Science & Network Security
    • /
    • v.21 no.5
    • /
    • pp.160-167
    • /
    • 2021
  • The authors of the article investigate the impact of digitalization on the forms change of employment and the labor market in the modern conditions. It is substantiated that digitalization processes directly affect the change of forms of employment and the range of occupations in the labor market, as well as the change of jobs. The positive and negative consequences of changing forms of employment for the economy in the process of digital transformation are analyzed, which include: reduction of personnel costs by employers; dissemination of non-standard, informal employment (electronic freelance, electronic outsourcing, start-employment); enabling employees to manage their working hours; increasing unemployment and imbalance of supply and demand in the labor market; reduction of productivity of enterprises, as a result of reduced productivity of workers with non-standard forms of employment, or with a negative indirect impact on productivity. A model for managing the process of digitalization in the labor market of Ukraine under different scenarios of their implementation, namely evolutionary and forced is devoted. To recognize the possible change in the level of employment in connection with the implementation of the forced scenario of digitalization in Ukraine, a model for estimating probable changes in the labor market is proposed. The directions of development of the state strategy of prevention of risks of reduction of number of workplaces in the course of digitalization are outlined.

Estimating CO2 Emission Reduction of Non-capture CO2 Utilization (NCCU) Technology (NCCU(Non-Capture CO2 Utilization) 기술의 CO2 감축 잠재량 산정)

  • Lee, Ji Hyun;Lee, Dong Woog;Gyu, Jang Se;Kwak, No-Sang;Lee, In Young;Jang, Kyung Ryoung;Choi, Jong-shin;Shim, Jae-Goo
    • Korean Chemical Engineering Research
    • /
    • v.53 no.5
    • /
    • pp.590-596
    • /
    • 2015
  • Estimating potential of $CO_2$ emission reduction of non-capture $CO_2$ utilization (NCCU) technology was evaluated. NCCU is sodium bicarbonate production technology through the carbonation reaction of $CO_2$ contained in the flue gas. For the estimating the $CO_2$ emission reduction, process simulation using process simulator (PRO/II) based on a chemical plant which could handle $CO_2$ of 100 tons per day was performed, Also for the estimation of the indirect $CO_2$ reduction, the solvay process which is a conventional technology for the production of sodium carbonate/sodium bicarbonate, was studied. The results of the analysis showed that in case of the solvay process, overall $CO_2$ emission was estimated as 48,862 ton per year based on the energy consumption for the production of $NaHCO_3$ ($7.4GJ/tNaHCO_3$). While for the NCCU technology, the direct $CO_2$ reduction through the $CO_2$ carbonation was estimated as 36,500 ton per year and the indirect $CO_2$ reduction through the lower energy consumption was 46,885 ton per year which lead to 83,385 ton per year in total. From these results, it could be concluded that sodium bicarbonate production technology through the carbonation reaction of $CO_2$ contained in the flue was energy efficient and could be one of the promising technology for the low $CO_2$ emission technology.

The Factors Affecting Vocational Identity : Comparing Korean Immigrant Adolescents and Non-Immigrant Adolescents(Korean parents family) (한국 다문화 중도입국 청소년과 일반 청소년(한국인 부모가정)의 진로정체감 수준에 영향을 미치는 요인 비교)

  • Ryou, Bee;Kim, Kihyun
    • Korean Journal of Social Welfare
    • /
    • v.67 no.1
    • /
    • pp.5-29
    • /
    • 2015
  • Career development of Korean Immigrant Adolescents is important element for their Korea social adjustment and reduction of social exclusion. Especially, vocational identity is considered significantly for their career development. This study investigated the relationships and levels of discrimination, depression, self-esteem on vocational identity by comparing Korean immigrant adolescents and non-Immigrant adolescents(Korean parents family: non poor family or poor family). The major findings of this study can be summarized as follows. First, the depression level of immigrant adolescents is higher than non poor family adolescents and their self-esteem level is lower than non poor family adolescents by means analysis. second, The path analysis and multi group analysis showed that the degree of discrimination by perceived immigrant adolescents had direct influence on vocational identity and also mediated depression, self-esteem as indirect influence. But non poor family adolescents and poor family adolescents showed that their degree of discrimination had only indirect influence on vocational identity as mediation of depression, self-esteem. The result of analysis were used to discuss theoretical, practical implication for career development of Korea immigrant adolescents.

  • PDF

Development of Integrated System of Time-Driven Activity-Based Costing(TDABC) Using Balanced Scorecard(BSC) and Economic Value Added(EVA) (BSC와 EVA를 이용한 TDABC 통합시스템의 개발)

  • Choi, Sungwoon
    • Journal of the Korea Safety Management & Science
    • /
    • v.16 no.3
    • /
    • pp.451-469
    • /
    • 2014
  • The purpose of this study is to implement and develop the integrated Economic Value Added (EVA) and Time-Driven Activity-Based Costing (TDABC) model to seek both improvement of Net Operating Profit Less Adjusted Tax (NOPLAT) and reduction of Capital Charge (CC). Net Operating Profit Less Adjusted Tax (NOPLAT) can be maximized by reducing the indirect cost of an unused resource capacity increased by Cost Capacity Ratio (CCR) of TDABC. On the other hand, Capital Charge (CC) can be minimized by improving the efficiency of Invested Capital (IC) considered by Weighted Average Cost of Capital (WACC) of EVA. In addition, the integrated system of TDABC using Balance Scorecard (BSC) and EVA is developed by linking between the lagging indicators and the three leading indicators. The three leading indicators include customer, internal process and growth and learning perspectives whereas the lagging indicator includes NOPLAT and CC in terms of financial perspective. When the Critical Success Factor (CSF) of BSC is cascading as a cause and an effect relationship, time driver of TDABC and capital driver of EVA can be used efficiently as Key Performance Indicator (KPI) of BSC. For a better understanding of the proposed EVA/TDABC model and BSC/EVA/TDABC model, numerical examples are derived from this paper. From the proposed model, the time driver of TDABC and the capital driver of EVA are known to lessen indirect cost from comprehensive income statement when increasing the efficiency of operating IC from the statement of financial position with unified KPI cascading of aligned BSC CSFs.

Degradation of Humic Acids by Ozone/high pH, Ozone/Hydrogen Peroxide and Ozone/Hydrogen Carbonate System ($O_3$/high pH, $O_3/H_2O_2$$O_3/{HCO_3}^-$ 시스템에서의 부식산의 분해 반응 특성)

  • Shin, Hyun Sang;Kim, Kei Woul;Rhee, Dong Seok
    • Analytical Science and Technology
    • /
    • v.13 no.5
    • /
    • pp.652-658
    • /
    • 2000
  • Chemical degradation of aqueous humic acid by ozonation was studied with respect to the direct reactions of ozone and the indirect reactions due to its preliminary decomposition to secondary oxidant, OH radical. This was characterized by analyzing TOC, $UV_{254}$ and ozone consumption measured in different experimental conditions in which ozone reacted in the presence of various concentrations of $H_2O_2$ and $HCO_3{^-}$ concentrations ranging from 20 to 100 mg/L. and different pH (5-9). The results suggest that the TOC removal is mainly dependent on indirect reactions of OH radical whereas $UV_{254}$ reduction is mainly dependent on direct reactions of ozone with humic acid molecules. It has been also found that ozone consumption was most likely to be affected by pH and alkalinity in the solution.

  • PDF

Emergy-Simulation Based Building Retrofit

  • Hwang, Yi
    • KIEAE Journal
    • /
    • v.14 no.3
    • /
    • pp.5-13
    • /
    • 2014
  • This paper introduces emergy(spelled with "m") that is a new environmental indicator in architecture, aiming to clarify conflicting claims of building design components in the process of energy-retrofit. Much of design practitioners' attention on low energy use in operational phases, may simply shift the lowered environmental impact within the building boundary to large consumption of energy in another area. Specifically, building energy reduction strategies without a holistic view starting from natural formation, may lead to the depletion of non-renewable geobiological sources (e.g. minerals, fossil fuels, etc.), which leaves a building with an isolated energy-efficient object. Therefore, to overcome the narrow outlook, this research discusses the total ecological impact of a building which embraces all process energy as well as environmental cost represented by emergy. A case study has been conducted to explore emergy-driven design work. In comparison with operational energy-driven scenarios, the results elucidate how energy and emergy-oriented decision-making bring about different design results, and quantify building components' emergy contribution in the end. An average-size ($101.9m^2$) single family house located in South Korea was sampled as a benchmark case, and the analysis of energy and material use was conducted for establishment of the baseline. Adoption of the small building is effective for the goal of study since this research intends to measure environmental impact according to variation of passive design elements (windows size, building orientation, wall materials) with new metric (emergy) regardless of mechanical systems. Performance simulations of operational energy were developed and analyzed separately from the calculation of emergy magnitudes in building construction, and then the total emergy demand of each proposed design was evaluated. Emergy synthesis results verify that the least operational energy scenario requires greater investment in indirect energy in construction, which clearly reveals that efficiency gains are likely to be overwhelmed by increment of material flows. This result places importance on consideration of indirect energy use underscoring necessity of emergy evaluation towards the environment-friendly building in broader sense.

Cost-benefit Analysis of Mandatory Prescription in Korea (의약분업의 비용-편익 분석)

  • Kim, Han-Joong;Park, Eun-Cheol;Kang, Hye-Young;Jee, Young-Keon
    • Journal of Preventive Medicine and Public Health
    • /
    • v.33 no.4
    • /
    • pp.484-494
    • /
    • 2000
  • Objective : To evaluate the relative benefits and the costs associated with the introduction of the new pharmaceutical provision called 'Mandatory Prescription System' which separates the role of physicians from that of pharmacists with respect to the prescription and dispensation of from the perspective of consumers (i.e., patients). Methods : The costs of the system were measured by considering both direct and indirect costs. Direct costs included additional payments for ambulatory care and dispensing fees that occurred under the new system. indirect costs consisted of transportation expenses and costs related to time spent for physician consultation, waiting for the prescriptions to be filled, and extra traveling. Benefits identified in this study were the reduction of drug misuse and overuse, and the overall decrease in drug consumption among the Korean population. Sensitivity analysis was peformed for the inclusion of benefits for outpatients of hospitals, price elasticity, and increased fees for established patients. Results : The net benefit was estimated to be about minus 1,862 billion won and the benefit-cost ratio was 0.478. This indicates that the costs of 'Mandatory Prescription' outweigh its benefits, relative to the previous system. The sensitivity analysis results for all the variables considered in this study consistently showed the benefit-cost ratio to be less than 1. Conclusion : The results of this study suggest that implementing Mandatory Prescription System in Korea might be inefficient from the consumer's perspective. The results of this study do not coincide with the results of previous studies, presumably because of the differences in study design and in which items of costs and benefits were considered.

  • PDF

Estimation of National Greenhouse Gas Emissions in Agricultural Sector from 1990 to 2013 - Focusing on the Crop Cultivation - (1990년부터 2013년까지 농업 분야 국가 온실가스 배출량 평가 - 경종부문 중심으로 -)

  • Choi, Eun Jung;Jeong, Hyun Cheol;Kim, Gun Yeob;Lee, Sun-il;Lee, Jong Sik
    • Journal of Climate Change Research
    • /
    • v.7 no.4
    • /
    • pp.443-450
    • /
    • 2016
  • The major greenhouse gases (GHGs) in agricultural sector are methane ($CH_4$), nitrous oxide ($N_2O$), carbon dioxide ($CO_2$). GHGs emissions are estimated by pertinent source category in a guideline book from Intergovernmental Panel on Climate Change (IPCC) such as methane from rice paddy, nitrous oxide from agricultural soil and crop residue burning. The methods for estimation GHGs emissions in agricultural sector are based on 1996 and 2006 IPCC guideline, 2000 and 2003 Good Practice Guidance. In general, GHG emissions were calculated by multiplying the activity data by emission factor. The total GHGs emission is $10,863Gg\;CO_2-eq$. from crop cultivation in agricultural sector in 2013. The emission is divided by the ratio of greenhouse gases that methane and nitrous oxide are 64% and 34%, respectively. Each gas emission according to the source categories is $7,000Gg\;CO_2-eq$. from rice paddy field, $3,897Gg\;CO_2-eq$. from agricultural soil, and $21Gg\;CO_2-eq$. from field burning, respectively. The GHGs emission in agricultural sector had been gradually decreased from 1990 to 2013 because of the reduction of cultivation. In order to compare with indirect emissions from agricultural soil, each emission was calculated using IPCC default factors (D) and country specific emission factors (CS). Nitrous oxide emission by CS applied in indirect emission, as nitrogen leaching and run off, was lower about 50% than that by D.