• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2009년도 추계학술대회 논문집
• /
• pp.673-674
• /
• 2009

• Bulletin of the Korean Chemical Society
• /
• 제32권2호
• /
• pp.595-598
• /
• 2011

Cetirizine hydrochloride reacted with $BiI_4^-$ in an acidic aqueous solution to form precipitate. After centrifugation, the atomic emission intensity of $Bi^{3+}$ contained in the supernatant solution was measured at the characteristic wavelength of 206.170 nm. The difference between the spectral signal intensity of the blank solution and that of the supernatant, ${\Delta}I$, was linearly related to the concentration of cetirizine hydrochloride. As a result, a new inductively coupled plasmaatomic emission spectrometric (ICP-AES) method was developed for the analysis of cetirizine hydrochloride. The linear range was from 27.7 to 184.8 $mg{\cdot}L^{-1}$, with a correlation coefficient (r) of 0.9961 and a detection limit of 9.6 $mg{\cdot}L^{-1}$. This method is simple and accurate, Without using toxic organic solvents, and is feasible for the quality control of cetirizine hydrochloride tablets and capsules.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.191-192
• /
• 2002

The scuffing failure is a critical problem in modern machine components, especially for the requirement of high efficiency and small size. In this study. scuffing experiments are conducted using Acoustic Emission(AE) measurement by an indirect sensing approach to detect scuffing failure. Using AE signals we con get and indication about the state of the friction processes, about the quality of solid and liquid layers on the contacting surface in real time. The FFT(Fast Fourier Transform)analyses of the AE signal are used to understand the interfacial interaction and the relationship between the AE signal and the state of contact is presented.

• 한국자동차공학회논문집
• /
• 제17권3호
• /
• pp.62-67
• /
• 2009

In this study, the potential possibility of biodiesel fuel was investigated as an alternative fuel for a naturally aspirated indirect injection diesel engine. The smoke emission of biodiesel fuel was reduced remarkably in comparison with diesel fuel, that is, it was reduced approximately 36% at 2000rpm, full load condition. And, power, torque and brake specific energy consumption showed no significant differences. However, NOx emission of biodiesel fuel was increased compared with commercial diesel fuel. Also, the effects of exhaust gas recirculation(EGR) to reduce the NOx emission has been investigated. It was found that simultaneous reduction of smoke and NOx was achieved with biodiesel fuel(20vol-%) and cooled EGR method$(10{\sim}15%)$.

• KDI Journal of Economic Policy
• /
• 제34권2호
• /
• pp.173-204
• /
• 2012

본고는 산출물시장이 과점적이고 동질적 상품이 거래되어 기업들이 생산량 경쟁을 하고 배출권시장은 완전경쟁적일 경우, 기업이 지출하는 저감투자량의 적절성을 이론적으로 분석한다. 산출물시장이 완전경쟁적일 때와는 달리 저감투자는 직접적으로 배출비용을 줄이는 효과 이외에 다른 기업의 산출물을 줄이는 간접적 효과를 발생시킨다. 균형하에서의 저감투자량은 사회적으로 최적인 저감투자량에 비해 생산량 대비 과잉투자를 야기하여 투자배분을 왜곡한다. 본고는 또한 불완전경쟁시장이 배출권 거래제도하에서 발생시킬 수 있는 비효율성의 제반 요인들을 검토하고 정책적 시사점을 제시한다.

• 대한환경공학회지
• /
• 제34권4호
• /
• pp.280-287
• /
• 2012

본 연구에서는 대학 캠퍼스 단위에서의 온실가스 인벤토리 구축을 위해 한양대학교 안산캠퍼스를 대상으로 직접 배출원(도시가스, 실내등유, 이동연소), 간접 배출원(전력), 기타 배출원(항공, 수도) 세 부분으로 온실가스 배출원을 규명하였으며, 2007년부터 2009년까지 온실가스 배출원별 에너지 사용량에 따른 온실가스 배출량을 산정하였다. 그 결과, 전체 온실가스 배출영역 중 가장 많은 부분을 차지하는 것은 간접배출의 전력부문으로 전체 온실가스 배출량의 56.7% 차지하는 것을 확인하였다. 또한, 대학본부에서 수행 가능한 온실가스 감축시나리오 및 학교구성원이 수행 가능한 온실가스 감축 실천시나리오를 대학환경에 적합하게 설계한 후 LEAP 모델을 이용하여 2007년부터 2020년까지의 온실가스 감축잠재량을 평가하였다. 그 결과, 감축시나리오 적용시 2020년 BAU(배출전망치) 대비 2020년에는 직접배출 중 고정연소에서 63.34 ton $CO_{2eq}/yr$, 이동연소에서 221.1 ton $CO_{2eq}/yr$ 감축되었으며, 간접배출 중 조명에서는 4,637.34 ton $CO_{2eq}/yr$ 온실가스가 감축되는 것으로 산출되었다. 또한, 실천시나리오를 통한 온실가스 감축잠재량은 1293.76 ton $CO_{2eq}/yr$으로 산출되었다. 따라서, 한양대학교 안산 캠퍼스에 감축 실천 시나리오를 모두 적용한다면 2020년에는 2020년 BAU 대비 온실가스를 총 24% 감축할 수 있을 것으로 추정된다.

• 한국산학기술학회논문지
• /
• 제20권2호
• /
• pp.378-384
• /
• 2019

식품 폐수 처리 설비중 폐수처리장 폭기조 송풍 설비 개선을 통한 수질개선 효과 및 전기사용량 변화에 따른 온실가스 발생량을 평가 하였으며, 식품 폐수처리장에서 발생되는 슬러지를 탈수, 보관, 이송하는 설비의 효율적인 개선을 통한 전기사용량 개선전과 개선후 변화에 따른 온실가스 발생량도 함께 평가하였다. 폐수처리장 설비 개선에 따른 온실가스 배출량 평가는 폐수처리 공정으로 부터의 직접배출과 전력사용으로부터의 간접배출량으로 구분 된다. 폐수처리장 수질 개선 효과는 BOD 제거율이 63.3%, COD 제거율 42.0%, SS 제거율 71.0%, T-N제거율이 39.6%로 나타났으며, 폐수처리에 의한 온실가스 직접배출량(Scope 1)과 전력소비량 변화에 대한 온실가스 간접배출량(Scope 2)을 적용하여 온실가스 배출량을 산정한 결과 설비 개선전 3,668.8tCO2eq./yr 에서 설비 개선후 3,392.8tCO2eq./yr 으로 감소 하여 총 276.0tCO2eq./yr (8.0%)의 온실가스 감축 효과가 있는 것으로 평가 되었다. 이상의 결과는 배출원의 수질 개선 효과로 인한 것이 아니라 전기사용량 감소로 인해 온실가스 배출량이 감소하였기 때문이다.

• 농촌계획
• /
• 제19권4호
• /
• pp.125-135
• /
• 2013

Analysis and evaluation of uncertainty is adopting the advanced methodology among the methods for greenhouse gas emission assessment that was defined in GPS2000 (Good practice guideline 2000) and GPG-LULUCF (GPG Land Use, Land-Use Change and Forestry). In 2006 IPCC guideline, two approaches are suggested to explain the uncertainty for each section with a national net emission and a prediction value on uncertainty as follows; 1) Spread sheet calculation based on the error propagation algorithm that was simplified with some assumptions, and 2) Monte carlo simulation that can be utilized in general purposes. There are few researches on the agricultural field including greenhouse gas emission that is generated from livestock and cultivation lands due to lack of information for statistic data, emission coefficient, and complicated emission formula. The main objective of this study is to suggest an evaluation method for the uncertainty of greenhouse gas emission in agricultural field by means of intercomparison of the prediction value on uncertainties which were estimated by spread sheet calculation and monte carlo simulation. A statistic analysis for probability density function for uncertainty of emission rate was carried out by targeting livestock intestinal fermentation, excrements treatment, and direct/indirect emission from agricultural lands and rice cultivation. It was suggested to minimize uncertainty by means of extraction of emission coefficient according to each targeting section.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 제35회 춘계학술대회
• /
• pp.34-39
• /
• 2002

The surfaces of machine components in sliding contact such as bearing, gears and pistons etc. frequently operate under the condition of mixed lubrication due to high load, high speed and slip. These machine components often undergo the inception of scuffing in practical application. The scuffing failure is a critical problem in modern machine components, especially for the requirement of high efficiency and small size. However, it is difficult to find a universal mechanism to explain all scuffing phenomena because there are so many factors affecting the onset of scuffing. In this study, scuffing experiments are conducted using Acoustic Emission(AE) measurement by an indirect sensing approach to detect scuffing failure. Acoustic Emission(AE) signal has been widely utilized to monitor the interaction at the friction interface. Using AE signals we can get an indication about the state of the friction processes, about the quality of solid and liquid layers eon the contacting surfaces in real time. The FFT(Fast Fourier Transform)analyses of the AE signal are used to understand the interfacial interaction and the relationship between the AE signal and the state of contact is presented

• Tribology and Lubricants
• /
• 제18권5호
• /
• pp.351-356
• /
• 2002

The surfaces of machine components in sliding contact such as bearing, gears and pistons etc. frequently operate under the condition of mixed lubrication due to high load, high speed and slip. These machine components often undergo the inception of scuffing in practical application. The scuffing failure is a critical problem in modern machine components, especially for the requirement of high efficiency and small size. However, it is difficult to find a universal mechanism to explain all scuffing phenomena because there are so many factors affecting the onset of scuffing. In this study, scuffing experiments are conducted using Acoustic Emission(AE) measurement by an indirect sensing approach to detect scuffing failure. Acoustic Emission(AE) signal has been widely utilized to monitor the interaction at the friction interface. Using AE signals we can get an indication about the state of the friction processes, about the quality of solid and liquid layers on the contacting surfaces in real time. The FFT(Fast Fourier Transform) analyses of the AE signal are sued to understand the interfacial interaction and the relationship between the AE signal and the state of contact is presented.