• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.307-308
• /
• 2009

We have proposed an index matching film to improve the emitting efficiency of green OLED. Here, SiO2 and TiO2 were selected to coat the green OLED. The structures of index matching film were designed in G1ass/TiO2/SiO2/ITO and SiO2/TiO2/Glass/ITO. Then, these materials were deposited by ion-assisted deposition system. Transmittances of deposited devices were 86.14 and 85.07 %, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.244.1-244.1
• /
• 2014

디스플레이 패널의 터치 스크린에 가장 널리 사용되는 ITO 전극은 사용자의 눈에 전극 면이 시각적으로 구분되지 않도록 해야 한다. 따라서 최근에는 ITO 전극 면이 구분되지 않도록 하기 위해 다층 박막으로 이루어진 인덱스 매칭(index matching, IM) 기술을 이용하여 ITO 전극 필름을 제작하고 있다. 이러한 인덱스 매칭된 ITO 필름은 기판이나 공정 조건, 인덱스 매칭 층의 물질 종류에 따라 ITO 박막의 전기적 광학적 특성이 각각 다르게 나타나기 때문에 이에 대한 많은 연구가 이루어지고 있다. 본 연구에서는 롤투롤 스퍼터링(roll to roll sputtering) 방법으로 고굴절과 저굴절이 순차적으로 코팅 처리된 PET 기판 위에 ITO 박막을 증착하여 IM-ITO 필름을 제작하고 전기적 광학적 특성을 관찰하였다. 이를 위해 습식(wet) 코팅 방법으로 저굴절층과 고굴절층을 PET 필름 위에 코팅하여 IM층을 제작한 PET 필름 위에 ITO 박막을 증착하고, $150^{\circ}C$로 후 열처리를 하여 인덱스 매칭된 ITO 필름을 제작하였다. 제작된 필름은 GIXD를 이용하여 박막의 구조와 결정성을 조사하였고, 면저항 측정기와 홀측정 장치를 이용하여 전기적 특성을 관찰하였다. 그리고 분광광도계와 탁도(haze) 측정기를 이용하여 광학적 특성을 조사하였다. 본 연구를 통해 롤투롤 스퍼터링 방법으로 유무기 복합막으로 구성된 IM-ITO 박막의 전기적 광학적 구조적 특성에 대해 보고하고자 한다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.6
• /
• pp.408-411
• /
• 2018

We fabricated highly flexible Mn-doped $SnO_2$ (MTO)/Ag/MTO/polydimethylsiloxane (PDMS)/MTO multilayer transparent conducting films. To reduce refractive-index mismatching of the MTO/Ag/MTO/polyethylene terephthalate (PET), index-matching layers were inserted between the oxide-metal-oxide-structured films and the PET substrate. The PDMS layer was deposited by spin-coating after adjusting the mixing ratio of PDMS and hexane. We investigated the effects of the index-matching layer on the color and reflectance differences with different PDMS dilution ratios. As the dilution ratio increased from 1:100 to 1:130, the color difference increased slightly, while the reflectance difference decreased from 0.62 to 0.32. The MTO/Ag/MTO/PDMS/MTO film showed a transmittance of 87.18~87.68% at 550 nm. The highest value of the Haacke figure of merit was $47.54{\times}10^{-3}{\Omega}^{-1}$ for the dilution ratio of 1:130.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.286-289
• /
• 2009

This paper presents an effective approach to minimize recursive computations for balancing stereo pairs by using disparity vector errors and its directional histogram. A stereo balancing function is computed from the correspondent pixels between two images, and a simple approach is to find the matching blocks of two images. However, this procedure requires recursive operation, and its computation cost is very high. Therefore, in this paper, we propose an efficient balance method using structural similarity index and a partial re-searching scheme to reduce the computation cost considerably. For this purpose, we determine if re-searching for each block is necessary or not by using the errors and the directional histogram of disparity vectors. Experiment results show that the performance of the proposed approach can save the computations significantly with ignorable image quality degradation compared with full re-search approach.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.905-909
• /
• 2002

Characteristics of reflective LCDs, which have gained a lot of notice in recent years, rely largely on optical design of circular polarizers and the quarter-wave plates, as a component. Important design includes wavelength dispersion, viewing angle, uniformity of display and matching of refractive index. Our work has contributed to improving performance of reflective LCDs by enhancing the characteristics of polymer film using stretching and optical lamination technologies. To design that offers higher contrast and wider viewing angle, we have discovered that it is necessary to control viewing angle variation of the polarizing axis in order to compensate for the viewing angle of the polarizing film as well as the optical anisotropic properties of liquid crystal. Applying this technology to circular polarizers used for reflective LCDs enables design of wide viewing angle circular polarizers. In order to realize higher contrast for reflective LCDs, it is also necessary to design other optical materials including polarizing films. For design of hybrid optical film, it is particularly necessary to reduce surface reflection and interface reflection. This paper also reports our findings concerning this topic.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.12
• /
• pp.3277-3285
• /
• 1996

In this paper, w designed an opical power distribution device for application to an optical switching and an optical subscriber loop. We fabricated PSG thin film by LPCVD. Based on the measured index of fabricted thin film, rib-type waveguide was transformed to two-dimension by the effective index method and we simulated dispersion property to find asingle-mode condition. We found that the optimum design parameters of rib-type waveguide are:cladding layer of 3.mu.m, core layer of 3.mu.m, buffer layer of 10.mu.m, and core width of 4.mu.m. Each side of the guiding region was etched down to 4.mu.m to shape the core. We used these optimum parameters of the rib-type waveguide with branching angle of 0.5.deg. and simulted the Y-branch waveguide by the BPM simulation. Numerical loss in branching area was claculated to be 0.1581dB and equal to the total loss of the Y-branch. The loss of the fabricated Y-branch waveguide on PSG film ws 1.6dB at .lambda.=1.3.mu.m before annealing but was 1.2dB after annealing at 1000.deg. C for 10 minutes. Consequently, the loss of branching area from 3000.mu.m to 6000.mu.m in the z-direction was 0.8dB, and single-mode propagation was confirmed by measuring the near field pattern. For coupling the fabricated Y-branch waveguide with an optical fiber, we fabricated V-groove which was used as the upholder of optical fiber. An etching angle was 54.deg. and the width and depth of guiding groove was 150.mu.m, 70.mu.m, respectively. The optical fiber is inserted onto V-groove. Both the Y-branch and V-groove were connected through the index matching oil. Coupling loss after connecting Y-branch and the optical fiber on V-groove was 0.34dB and that after injecting index mateching oil was 0.14dB.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.5
• /
• pp.986-991
• /
• 2016

In this study, we prepared ITO thin films on $Nb_2O_5/SiO_2$ double buffer layer using DC magnetron sputtering method and investigated electrical and optical properties with various substrate temperatures (room temperature ~ $400^{\circ}C$). The resistivity showed a decreasing tendency, because crystallinity has been improved due to the enlarged grain size with increasing substrate temperature. ITO thin film deposited at $400^{\circ}C$ showed the most excellent value of resistivity and sheet resistance as $3.03{\times}10^{-4}{\Omega}{\cdot}cm$, $86.6{\Omega}/sq.$, respectively. In results of optical properties, average transmittance was increased but chromaticity ($b^*$) was decreased in visible light region (400~800nm) with increasing substrate temperature. Average transmittance and chromaticity ($b^*$) of ITO thin film deposited at $400^{\circ}C$ exhibited significantly improved results as 85.8% and 2.13 compared to 82.8% and 4.56 of the ITO thin film without buffer layer. Finally, we found that ITO thin film introduced $Nb_2O_5/SiO_2$ double buffer layer has a remarkably improved optical property such as transmittance and chromaticity due to the index matching effect.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.359-359
• /
• 2014

In this study, surface plasmon resonance structures for the selective and the enhanced transmission of infrared light were designed. In order to relieve the large discontinuity of refractive index between air and metal hole array, $Si_3N_4$ was used as the impedance matching layer. Experimental parameter were calculated and determined in advance by the rigorous coupled wave analysis (RCWA) simulation, and then the experiment was carried out. A 2-dimensional metal hole array structures were patterned on the size of $1{\times}1cm^2$ GaAs substrate using photolithography process, and 5 nm thick Ti, 50 nm thick Au were deposited by E-beam evaporator, respectively. Subsequently, $Si_3N_4$ films with various thicknesses (150, 350, 550, and 750 nm) were deposited by plasma enhanced chemical vapor deposition (PECVD). For the comparison, transmittance of specimens with and without $Si_3N_4$ was measured using Fourier transform infrared spectroscopy (FTIR) in the range of $2.5-15{\mu}m$. Furthermore, the surface and the cross-sectional images were collected from the specimens by scanning electron microscopy (SEM). From the results, it was demonstrated that the transmittance was enhanced up to 80% by the deposition of 750 nm $Si_3N_4$ at $6.23{\mu}m$. It has advantage of enhanced transmission despite the simple fabrication process.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1069-1074
• /
• 2022

In this study, we prepared ITO thin films on the Nb₂O₅/SiO₂ double buffer layer and investigated electrical and optical properties according to the change of SiO₂ buffer layer thickness (40~50nm). The ITO thin film fabricated on the Nb₂O₅/SiO₂ double buffer layer exhibited a broad surface roughness with a small value ranging of 0.815 to 1.181nm, and the sheet resistance was 99.3 to 134.0Ω/sq. It seems that there is no problem in applying the ITO thin film to a capacitive touch screen panel. In particular, the average transmittance in the short-wavelength (400~500nm) region and the chromaticity (b^*) of the ITO thin film deposited on the Nb₂O₅(10nm)/SiO₂(40nm) double buffer layer showed significantly improved results as 83.58% and 0.05, respectively, compared to 74.46% and 4.28 of ITO thin film without double buffer layer. As a result, it was confirmed that optical properties such as transmittance in the short-wavelength region and chromaticity were remarkably improved due to the index matching effect in the ITO thin film with the Nb₂O₅/SiO₂ double buffer layer.

• Journal of the Korean Society of Visualization
• /
• v.6 no.2
• /
• pp.33-38
• /
• 2008

The effect of the radial temperature gradient and the presence of slits in the wall of outer of two cylinders involved in creating a Taylor-Couette flow was investigated by measuring the velocity field inside the gap. The slits were azimuthally located along the inner wall of the outer cylinder and the number of slits used in this study was 18. The radius ratio and aspect ratio of the models were 0.825 and 48, respectively. The heating film wrapped around the inner cylinder was used for generating the constant heat flux and we ensured the constant temperature condition at the outer space of the outer cylinder. The velocity fields were measured by using the PIV(particle image velocimetry) method. The refractive index matching method was applied to remove image distortion. The results were compared with plain wall configuration of Taylor-Couette flow. From the results, the presence of slits in the wall of outer cylinder and temperature gradient increased the flow instability.