• Structural Engineering and Mechanics
• /
• 제6권6호
• /
• pp.659-671
• /
• 1998

Exercise of complete control on all aspects of any manufacturing / fabrication process is very difficult, leading to uncertainties in the material properties and geometric dimensions of structural components. This is especially true for laminated composites because of the large number of parameters associated with its fabrication. When the basic parameters like elastic modulus, density and Poisson's ratio are random, the derived response characteristics such as deflections, natural frequencies, buckling loads, stresses and strains are also random, being functions of the basic random system parameters. In this study the basic elastic properties of a composite lamina are assumed to be independent random variables. Perturbation formulation is used to model the random parameters assuming the dispersions small compared to the mean values. The system equations are analyzed to obtain the mean and the variance of the plate natural frequencies. Several application problems of free vibration analysis of composite plates, employing the proposed method are discussed. The analysis indicates that, at times it may be important to include the effect of randomness in material properties of composite laminates.

• 한국ITS학회 논문지
• /
• 제10권2호
• /
• pp.103-111
• /
• 2011

최근 메쉬 네트워크는 다양한 분야에서 사용되고 있다. 그러나 메쉬 네트워크는 무선 전송의 특성으로 인한 제한적인 대역폭을 제공하며, 특히 단일 채널로 구성된 메쉬 네트워크의 경우 다중 홉 전송 시 전송률 저하 문제 등이 발생한다. 이러한 문제를 해결하고 QoS(Quality of Service)를 제공하기 위해 다양한 라우팅방식이 제안되어 왔다. 본 논문에서는 MPLS(Multi Protocol Label Switching)를 적용하여 QoS를 제공하는 MPLS 메쉬 네트워크 구조를 제안한다. MPLS를 적용한 메쉬 네트워크를 통해 하부 QoS 제공방식과 무관하게 상위 응용계층에서의 경로관리가 용이해지며 트래픽관리가 용이해진다. 본 논문에서는 IEEE 802.11e 표준을 적용하여 트래픽에 대한 차별적인 서비스를 제공하도록 MPLS 적용 메쉬 라우터를 설계하고, 구현 및 실험을 통하여 동작을 검증하였다.

• 한국지구과학회지
• /
• 제33권1호
• /
• pp.11-31
• /
• 2012

카울라에 의해 완성되었던 인공위성궤도이론과 케플러의 법칙을 다시 다루었다. 카울라의 원문에서는 생략되었던 부분을 포함한 모든 수식유도과정을 상세히 기술하였다. 특히 15개의 독립적인 라그랑지 괄호들을 계산하는 데에 변환행렬의 직교성을 사용하여, 간결성과 명확성을 이루었다. 여러 중간단계에서 중요한 물리적인 개념들에 대한 설명도 추가하였다. 카울라의 개념적 오류 한 개를 정정하였다.

• International Journal of Concrete Structures and Materials
• /
• 제9권3호
• /
• pp.283-294
• /
• 2015

In the present study, a porous concrete with alkali activated slag (AAS) and coal bottom ash was developed and the effect of carbonation on the physical property, microstructural characteristic, and heavy metal leaching behavior of the porous concrete were investigated. Independent variables, such as the type of the alkali activator and binder, the amount of paste, and $CO_2$ concentration, were considered. The experimental test results showed that the measured void ratio and compressive strength of the carbonated porous concrete exceeded minimum level stated in ACI 522 for general porous concrete. A new quantitative TG analysis for evaluating $CO_2$ uptake in AAS was proposed, and the result showed that the $CO_2$ uptake in AAS paste was approximately twice as high as that in OPC paste. The leached concentrations of heavy metals from carbonated porous concrete were below the relevant environmental criteria.

• 한국해양공학회지
• /
• 제7권2호
• /
• pp.19-29
• /
• 1993

The static tensile tests of GFRP, ID300, CFRID300 and CFRPEEK were made on the plain and notched specimens at room temperature. The results were discussed based on linear notch mechanics which was proposed by H.Nistani. The fracture of notched GFRP, ID300, CFRID300 and CFRPEEK specimens is controlled by the elastic maximum stress, $({\sigma}_max)$, and the notch root racius,$\rho$, alone, independently of the other geometrical conditions. The relation between fracture nominal stress,$({\sigma}_max)$, and stress concentration factor, $K_t$ and a part where $({\sigma}_c)$ is nearly constant independent of $K_t$. A similar phenomenon can be seen in the fatigue tests of notched specimes under rotating bending or push-pull. The almost constant $({\sigma}_c)$ values correspond to the nearly constant apparent stress intensity factor, $K_{1pc}$ values, obtained by assuming ,$\rho$=0. This can be attributed to the existence of the stable crack. Linear notch mechanics is very useful for analyzing the static tensile fracture behavior of notched GFRP, ID300, CFRPEEK specimens.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.293-296
• /
• 2002

This paper proposes new driving methods for designing a driver independent of the current property of organic light emitting diodes (OLED) displays. The proposed methods are the Look-Up Table (LUT) and the Pulse Width Modulation (PWM). The LUT is used to handle the amount of the current for driving the OLED display panel and the PWM is applied to represent the gray scale on the OLED display panel. Segment and common drivers were implemented using delay circuits to prevent short-circuit current and a DC-DC converter was designed to supply the drivers with a power source. In particular, tile proposed methods are used for the manufacturing of 1.8" 128$\times$128 dot passive matrix OLED display panel. The designed circuit was fabricated using 0.6w, 2-poly, 3-metal, CMOS process and applied to the Personal Communication System (PCS) phone successfully.ully.

• 대한기계학회논문집
• /
• 제14권2호
• /
• pp.310-323
• /
• 1990

A three-noded, with three degree-of-freedom at each node, in-plane curved beam element is formulated and employed in eigen-analysis of constant curvature beam. The conventional quadratic shape functions used in a three noded C .deg. type curved beam element produce such an undesirable large stiffness that a significant error is introduced in displacements and stresses. These phenomena are called 'Stiffness Locking Phenomena', which result from spurious strain energy due to inappropriate assumptions on independent isoparametric quadratic interpolation functions. Stiffness locking phenomena can be alleviated by using modified interpolation functions which get rid of spurious constraints of conventional interpolation functions. Eigenvalues and their modes as well as displacements and stresses may be locked because they are related to stiffness. Using modified curved beam element in eigenvalue problem of cantilever and arch, the property and performance of modified curved beam element are examined by numerical experimentations. In these eigen-analyses, mass matrices are calculated by using both modified and unmodified curved beam element, are compared with theoretical solutions. These comparisons show that the performance of the modified curved beam element is better than that of the unmodified curved beam element.

• 한국생산제조학회지
• /
• 제24권5호
• /
• pp.535-540
• /
• 2015

We propose an enhanced Green's function approach to predict thermal stresses by considering temperature-dependent material properties. We introduce three correction factors for the maximum stress, the time taken to reach maximum stress, and the time required to attain steady state based on the Green's function results for each temperature. The proposed approach considers temperature-dependent material properties using correction factors, which are defined as polynomial expressions with respect to temperatures based on Green's functions, that we obtain from finite-element (FE) analyses at each temperature. We verify the proposed approach by performing detailed FE analyses on thermal transients. The Green's functions predicted by the proposed approach are in good agreement with those obtained from FE analyses for all temperatures. Moreover, the thermal stresses predicted using the proposed approach are also in good agreement with the FE results, and the proposed approach provides better predictions than the conventional Green's function approach using constant, time-independent material properties.

• 한국식품과학회지
• /
• 제24권1호
• /
• pp.54-58
• /
• 1992

국내 시판용 옥수수 전분을 시료로 하여 그 호화액의 전분농도와 측정온도에 따른 리올로지 특성을 조사하였다. $4{\sim}9%$ 옥수수 전분 호화액의 리올로지 거동은 Herschel-Bulkley 식에 적합하였고, 항복응력을 갖는 의가소성 유체의 특성을 나타내었다. 전분농도의 증가로 의가소성은 증가하였으나 의가소성의 온도의존성은 보이지 않았고, 겉보기 점도와 항복응력은 모두 지수함수적인 농도 및 온도의존성을 나타내었다. 이들 농도 및 온도에 따른 유동특성을 해석한 결과, 옥수수 면분 호화액에서 졸-겔 전이와 같은 구조적 변화를 일으키는 농도 및 항복응력을 나타내기 시작하는 농도는 각각 $6.22{\sim}6.52%$ 및 $2.6{\sim}6.52%$이었다.

• Carbon letters
• /
• 제9권4호
• /
• pp.324-339
• /
• 2008

The principal aims of the review paper are (1) to establish broad overview information, both qualitative and quantitative, relating to the world market for polyacrylonitrile (PAN) or pitch-based carbon fibers; and (2) to generate an effective analysis and break down of consumption by process route and eventual end-use. The review paper also designed specifically to provide subscribers with an accurate, independent, and realistic assessment of the current status and future perspective of the market for carbon fibers in the world. The world market for carbon fibers continues to grow rapidly, fuelled by new industrial end uses, such as sport and leisure goods, aerospace, automotive applications, civil engineering and infrastructure repair, and immerging applications in energy generation. Demands for properties of carbon fibers used in those applications include many things such as strength, toughness, fatigue property, corrosion resistance, heat resistance, etc., and these become to be higher level. On the other hand, demands for manufacturing technologies of carbon fibers become to be difficult with these demands for properties, and these are wide variety such as high efficiencies, high qualities, many functions, labor saving, and low cost. In this review paper, thus, the recent carbon fibers corresponded to these needs, and its latest manufacturing technologies as well as market prospects are described.