• Korean Chemical Engineering Research
• /
• v.54 no.1
• /
• pp.44-51
• /
• 2016

The powder core, conventionally fabricated from iron particles coated with insulator, showed large eddy current loss under high frequency, because of small specific resistance. To overcome the eddy current loss, the increase in the specific resistance of powder cores was needed. In this study, copper oxide coating onto electrically conductive iron particles was performed using a planetary ball mill to increase the specific resistance. Coating factors were optimized by the Response surface methodology. The independent variables were the CuO mass fraction, mill revolution number, coating time, ball size, ball mass and sample mass. The response variable was the specific resistance. The optimization of six factors by the fractional factorial design indicated that CuO mass fraction, mill revolution number, and coating time were the key factors. The levels of these three factors were selected by the three-factors full factorial design and steepest ascent method. The steepest ascent method was used to approach the optimum range for maximum specific resistance. The Box-Behnken design was finally used to analyze the response surfaces of the screened factors for further optimization. The results of the Box-Behnken design showed that the CuO mass fraction and mill revolution number were the main factors affecting the efficiency of coating process. As the CuO mass fraction increased, the specific resistance increased. In contrast, the specific resistance increased with decreasing mill revolution number. The process optimization results revealed a high agreement between the experimental and the predicted data ($Adj-R^2=0.944$). The optimized CuO mass fraction, mill revolution number, and coating time were 0.4, 200 rpm, and 15 min, respectively. The measured value of the specific resistance of the coated pellet under the optimized conditions of the maximum specific resistance was $530k{\Omega}{\cdot}cm$.

• Journal of Cadastre & Land InformatiX
• /
• v.44 no.1
• /
• pp.179-194
• /
• 2014

In this study, it aims to research for unified system of "the surveying and geospatial information management" and new National geoSpatial Information Infrastructure(NSDI) as new paradigm against the strategy of "global geospatial information management". The country's existing NGIS projects and the policies of spatial information were examined in this paper, then it was defined newly by modification of NSDI's data coverage with bottom-up method. The new NSDI strategy is based on large scale digital map which was influenced by the local and global trend such as open data, e-Government, Earth observation, etc. (refer to Fig. 1). It was also suggested with new concept of NSDI model that the public-private sharing data can be added to digital map on equal term with spatial core data. (refer to Fig. 2) It is proposed the institutional model of MOLIT(Ministry of Land, Infrastructure and Transport) as new concept of NSDI which was applied(refer to Fig. 4). The new model is improving localization and reinforcing cooperation system with not only the other departments within the MOLIT but also the other ministries(forestry, environment, agriculture, heritage, etc.) from independent operation system as a part informatization of land, infrastructure and transport. At the new SDI institutional model of the MOLIT, the spatial information is reorganized as common data infrastructure for all applications, Goverment 3.0 can be feasible according to common data related to government agencies and local government's data vertically or horizontally. And then, it can be practical strategy model to integrate and link all the map and the register which are managed by the laws and institutions if this unified system as a common data can include all spatial core data(digital map), such as base map data of NGA(national gespatial agency), land data and facility data of local government.

• Journal of Satellite, Information and Communications
• /
• v.10 no.4
• /
• pp.95-100
• /
• 2015

These days, satellite core technologies are being developed as a way to provide various information by considering simultaneously sending, wide area covering, highly precide, and anti-disaster technologies. Not only global positioning, and image but also space launcher, satellite bus, satellite payload, earth station are being convergently developed in a different technological field. Especially, it is required a lot of initial investing expenditure to provide the Earth observational information service based on the space technologies. Such a trend and change of satellite technologies Korea has realized the necessity for the domestic independent development of next generation earth observation satellites, and are preparing the profound items such as a detailed implementation plan for the efficient development project. Like the satellite advanced countries, it should be transparently carried out that an efficient implementation of the developing target related to the geostationary earth observation satellite development, establishment of technological auditing function and quality assurance system, implementation plan, progressing courses and results of the satellite development program by way of planning, evaluation and management. For these things cited above, it is necessary to operate systematically and continuously the professional structural system by the governmental department in order to control the geostationary earth observation satellite development project. Therefore, this study proposes a development project management improvement method of the Korea next generation geostationary earth observation satellite based on the development project management system of the domestic geostationary satellite system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.2
• /
• pp.432-443
• /
• 2017

The primary goal of the MPEG-H 3D Audio standard is to provide immersive audio environments for high-resolution broadcasting services such as UHDTV. This standard incorporates a wide range of technologies such as encoding/decoding technology for multi-channel/object/scene-based signal, rendering technology for providing 3D audio in various playback environments, and post-processing technology. The reference software decoder of this standard is a structure combining several modules and can operate in various modes. Each module is composed of independent executable files and executed sequentially, real time decoding is impossible. In this paper, we make DLL library of the core decoder, format converter, object renderer, and binaural renderer of the standard and integrate them to enable frame-based decoding. In addition, by measuring the computation complexity of each mode of the MPEG-H 3D-Audio decoder, this paper also provides a reference for selecting the appropriate decoding mode for various hardware platforms. As a result of the computational complexity measurement, the low complexity profiles included in Korean broadcasting standard has a computation complexity of 2.8 times to 12.4 times that of the QMF synthesis operation in case of rendering as a channel signals, and it has a computation complexity of 4.1 times to 15.3 times of the QMF synthesis operation in case of rendering as a binaural signals.

• Cartoon and Animation Studies
• /
• s.35
• /
• pp.155-180
• /
• 2014

The roles of the characters of 3D animation Toystory3, which was released in 2010 and achieved worldwide success, can be classified into typical, simple and easy-to-understand roles such as hero, villain, princess, and assistant. However, the process, in which each character's role is finally recognized by the audience, is embodied in a very colorful and exquisite manner and makes the curiosity of the audience continue effectively. The stream of the diverse role changes of the characters of Toystory3 is represented through "visual rhythm of the lighting design" and such rhythm can be confirmed most clearly in the digital colorscript stage. This researcher analyzed the characters' role changes in the work based on Propp's folktale character analysis theory, and extracted the core scenes that lead to inference, doubt, performance, reinforcement by character in order to grasp how the audience gasps major characters' role changes. The visual differences of the lighting design, which the four core scenes of each character show, were represented in graph and analyzed, and the results showed that the changes that one character has constituted rhythmical, visual contrast gradually and the rhythms of each independent character achieve visual contrast and harmony each other like the voice part of polyphony. This researcher calls this "the visual counterpoint of character's changing" and derives the conclusion that a dual visual counterpoint is hidden in the character production of the full-length animation Toystory3. Along with this, this researcher proposes the production of full-length animation that actively utilizes constructive aesthetics.

• Tunnel and Underground Space
• /
• v.27 no.4
• /
• pp.230-242
• /
• 2017

Seismic velocities measured from in-situ tests (n=177) and through rock core samples (n=1,035) are reviewed in light of construction standards, widely used standards as a first-hand approximation of rock classification solely based on seismic velocities. In-situ down hole tests and refraction survey for soft rocks showed seismic velocities of 1,400~2,900 m/s which is faster than those specified in construction standards. For moderate~ hard rocks, in-situ down hole tests and refraction survey showed 2,300~3,800 m/s which roughly corresponds with the range specified in the construction standards. A similar trend is also observed for seismic velocities measured from rock core samples. The observed differences between construction standards and seismic velocities can be explained in two ways. If construction standards are correct the observed differences may be explained with seismic velocities affected by underlying fast velocities and also possibly with selection of intact cores for velocity measurement. Alternatively, construction standards may have intrinsic problems, namely artificial discrete boundaries between soft rocks and moderate rocks, application of foreign standards without consideration of geologic setting and lack of independent verification steps. Therefore, we suggest a carefully designed verification studies from a test site. We also suggest that care must be exercised when applying construction standards for the interpretation and accessment of rock mass properties.

• Asia pacific journal of information systems
• /
• v.21 no.2
• /
• pp.59-87
• /
• 2011

These days, firms are focusing on the improvement of relationships with business partners. The supply chain integrations are taking critical role in improving the relationships with business partners. In accordance with the development of the IT technology, it became possible for firms not only to integrate inner parts of the organization, but also to integrate the company with other organizations in the supply chain. Therefore, in e-Biz environments, it is imperative for firms to strengthen the core capacity through the supply chain, and to precisely determine the components of the determinants of e-Business integration which impact the firm performance. This study analyzed determinants that have impacts on e-business integration in e-business capacity perspectives in competitive environments. This study based on the premise that the resources and capacities that Grant(1991) and Hart(1995) emphasized do not directly influence the corporate performance. This study focused on the fact that corporate must create core competencies based on these capacities to establish competitive edge. Therefore, this study model analyzed to find out which e-Biz competencies are needed to integrate e-Biz according to competitive environment elements. This study designed to empirically analyze the impact of the e-Biz competencies to the e-Biz integration and to the corporate performance. Independent variables of this study-IT management, partner management, e-Biz knowledge, e-Biz establishment and proliferation, process innovation-are selected based on precedent studies on e-Biz competencies. We selected intermediate variables to verify that e-Biz competencies do not have direct impact on the corporate performance, but have impact on the e-Biz integration, which is intermediate effect. That is to verify that if the components of supply chain improve the integration level using e-Biz competencies, the overall supply chain performances will improve. Dependent variables are selected to verify that e-Biz integration has impacts on corporate performances. This study used factor analysis, path analysis, moderating effect analysis as statistical tests. First, we used exploratory factor analysis and confirmatory factor analysis to analyze reliability and validity. Because e-Biz competencies are presented variously by preceding studies, we used SPSS16.0 to verify if survey questionnaire used by theoretical backgrounds is properly composed. Second, we tested the property of structure model by AMOS. We did path analysis using AMOS16.0 to test structure that is composed of e-Biz competencies and e-Biz integration. Last, we tested moderating effects of measure factors. We analyzed 163 domestic companies to find out many significant suggestive points. First, relationship improvement capacity, e-business knowledge sharing capacity with business partners, and process innovation capacity are adopted as determinants of differentiation and competitive edges against competing firms. Second, e-business knowledge sharing capacity, and process innovation capacity are analyzed as the determinants of e-business integration in the firm which demand fluctuation in the market is high. On the other hand, among the determinants that require capturing ideas on new products, and strengthening the technological power, process innovation capacity are adopted as the determinants. These results provide us the foundation that the determinants that we have analyzed can impact the supply chain integration strategies which take into account the competitive environments.

• Korean Journal of Food Science and Technology
• /
• v.32 no.3
• /
• pp.646-653
• /
• 2000

Using agar and waxy com starch as the wall material, we could encapsulate the purified fish oil. Firstly, we have developed a simple and sensitive method for the quantitative analysis of the microencapsulation yield using 5% cupric acetate pyridine solution. Then, the optimum conditions such as the ratio of [core material] to [wall material]$(X_1)$, the temperature of dispersion fluid$(X_2)$, and the emulsifier concentration$(X_3)$ for the microencapsulation process were determined by using response surface methodology(RSM). The regression model equation for the yield of microencapsulation(Y, %) of purified fish oil upon three kinds of independent variables could be predicted as follows; Y = 100.138621-0.735000$(X_1)$+0.840000$(X_1)(X_2)$+0.817500$(X_1)(X_3)$-0.852500$(X_2)(X_3)$. And the optimum conditions for the microencapsulation of the purified fish oil were the ratio of [core material] to [wall material] of 4.9 : 5.1(w/w), the emulsifier concentration of 0.48%, and dispersion fluid temperature of $19.4^{\circ}C$. The microcapsules containing the purified fish oil showed the highest storage stability at pH 7.0 and $20{\sim}25^{\circ}C$.

• Earthquakes and Structures
• /
• v.8 no.3
• /
• pp.665-679
• /
• 2015

The strain rate of reinforced concrete (RC) structures stimulated by earthquake action has been generally recognized as in the range from $10^{-4}/s$ to $10^{-1}/s$. Because both concrete and steel reinforcement are rate-sensitive materials, the RC beam-column joints are bound to behave differently under different strain rates. This paper describes an investigation of seismic behavior of RC beam-column joints which are subjected to large cyclic displacements on the beam ends with three loading velocities, i.e., 0.4 mm/s, 4 mm/s and 40 mm/s respectively. The levels of strain rate on the joint core region are correspondingly estimated to be $10^{-5}/s$, $10^{-4}/s$, and $10^{-2}/s$. It is aimed to better understand the effect of strain rates on seismic behavior of beam-column joints, such as the carrying capacity and failure modes as well as the energy dissipation. From the experiments, it is observed that with the increase of loading velocity or strain rate, damage in the joint core region decreases but damage in the plastic hinge regions of adjacent beams increases. The energy absorbed in the hysteresis loops under higher loading velocity is larger than that under quasi-static loading. It is also found that the yielding load of the joint is almost independent of the loading velocity, and there is a marginal increase of the ultimate carrying capacity when the loading velocity is increased for the ranges studied in this work. However, under higher loading velocity the residual carrying capacity after peak load drops more rapidly. Additionally, the axial compression ratio has little effect on the shear carrying capacity of the beam-column joints, but with the increase of loading velocity, the crack width of concrete in the joint zone becomes narrower. The shear carrying capacity of the joint at higher loading velocity is higher than that calculated with the quasi-static method proposed by the design code. When the dynamic strengths of materials, i.e., concrete and reinforcement, are directly substituted into the design model of current code, it tends to be insufficiently safe.

• The Korean Journal of Air & Space Law and Policy
• /
• v.22 no.2
• /
• pp.27-51
• /
• 2007

The cumulative result of the work by the ICAO Secretariat, the Secretariat Study Group and the Council Special Group on the Modernization of the Rome Convention of 1952 are two draft Conventions, namely: "Draft Convention on Compensation for Damage Caused by Aircraft to Third Parties, in case of Unlawful Interference", and "Draft Convention on Compensation for Damage Caused by Aircraft to Third Parties" The core provisions of the former draft Convention are as follows: The liability of the operator is strict, that is, without the necessity of proof of fault. It would be liable for damage sustained by third parties on condition only that the damage was caused by an aircraft in flight(Article 3). However, such liability is caped based on the weight of the aircraft(Article 4). It is envisaged to create an independent organization called the Supplementary Compensation Mechanism, with the principle purpose to pay compensation to persons suffering damage in the territory of a State Party, and to provide financial support(Article 8). Compensation shall be paid by the SCM to the extent that the total amount of damages exceeds the Article 4 limits(Article 19). The main issues on the farmer draft Convention are relating to breaking away from Montreal Convention 1999, no limits on individual claims but a global limitation on air carrier liability, insurance coverage, cap of operators' strict liability, and Supplementary Compensation Mechanism. The core provisions of the latter draft Convention are as follows: the liability of the operator is strict, up to a certain threshold tentatively set at 250,000 to 500,000 SDRs. Beyond that, the operator is liable for all damages unless it proves that such damage were not due to its negligence or that the damages were solely due to the negligence of another person(Article 3). The provisions relating to the SCM and compensation thereunder do not operate under this Convention, as the operator is potentially for the full amount of damages caused. The main issues on the latter draft Convention are relating to liability limit of operator, and definition of general risks. In conclusion, we urge ICAO to move forward expeditiously on the draft Convention to establish a third party liability and compensation system that can stand ready to protect both third party victims and the aviation industry before another 9/11-scale event occurs.