• Transactions on Control, Automation and Systems Engineering
• /
• v.2 no.1
• /
• pp.56-61
• /
• 2000

Majority of industrial robots are controlled by a simple independent joint control of joint actuators rather than complex controllers based on the nonlinear dynamic model of the robot manipulator. In this independent joint control scheme, the performance of actuator control is influenced significantly by the joint disturbance torques including gravity, Coriolis and centrifugal torques, which result in the trajectory tracking error in the joint control system. The control performance of a redundant manipulator under independent joint control can be improved by minimizing this joint disturbance torque in resolving the kinematic redundancy. A 3 DOF planar robot is studied as an example, and the dynamic programming method is used to find the globally optimal joint trajectory that minimize the joint disturbance torque over the entire motion. The resulting solution is compared with the solution obtained by the conventional joint torque minimization, and it is shown that joint disturbance can be reduced using the kinematic redundancy.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.2
• /
• pp.126-132
• /
• 2002

Robot manipulator has highly nonlinear dynamics. Therefore the control of multi-link robot arms is a challenging and difficult problem. In this paper an independent joint adaptive fuzzy sliding mode scheme is developed leer control of robot manipulators. The proposed scheme does not require an accurate manipulator dynamic model, yet it guarantees asymptotic trajectory tracking despite gross robot parameter variations. Numerical simulation for independent joint control of a 3-axis PUMA arm will also be included.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.3
• /
• pp.342-348
• /
• 1998

A majority of industrial robots are controlled by a simple joint servo control of joint actuators. In this type of control, the performance of control is greatly influenced by the joint interaction torques including Coriolis and centrifugal forces, which act as disturbance torques to the control system. As the speed of the robot increases, the effect of this disturbance torque increases, and hence makes the high speed - high precision control more difficult to achieve. In this paper, the joint disturbance torque of robots is analyzed. The joint disturbance torque is defined using the coefficients of dynamic equation of motion, and for the case of a 2 DOF planar robot, the conditions for the minimum and maximum joint disturbance torques are identified, and the effect of link parameters and joint variables on the joint disturbance torque are examined. Then, a solution to the optimal path placement problem is propose that minimizes the joint disturbance torque during a straight line motion. The proposed method is illustrated using computer simulation. The proposed solution method can be applied to a class of robots that are controlled by independent joint servo control, which includes the vast majority of industrial robots.

• Journal of Industrial Technology
• /
• v.18
• /
• pp.289-293
• /
• 1998

In a independent joint servo control of robots, the performance of the control is influenced greatly by the joint interaction torques including Coriolis and centrifugal forces. These act as disturbance torques to the control system. As the speed of the robot increases, the effect of this disturbance torque increase, and makes the high speed - high precision control more difficult to achieve. In this paper, a solution to the optimal path placement problem is presented that minimizes the joint disturbance torque during a straight line motion. The proposed method is illustrated using computer simulation. The proposed solution method can be applied to the class of robots that are controlled by independent joint servo control, which includes the vast majority of industrial robots.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.47-51
• /
• 1987

This paper presents a decentralized adaptive control scheme based on Lyapunov design for robotic manipulators, which make possible the joint independent control without neglecting the coupling between the joint motions. The performance of the presented scheme is compared via computer simulations with the conventional joint independent control scheme.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.6
• /
• pp.55-61
• /
• 2003

Control of multi-link robot arms is a challenging and difficult problem because of the highly nonlinear dynamics. Independent joint adaptive scheme is developed for control of robot manipulators based on Sugeno-type of fuzzy logic. Fuzzy logic system is used to approximate the coupling forces among the joints, coriolis force, centrifugal force, gravitational force, and frictional forces. The proposed scheme does not require an accurate manipulator dynamic, and it is proved that closed-loop system is asymptotic stable despite the gross robot parameter variations. Numerical simulations for three-axis PUMA robot are included to show the effectiveness of controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1455-1458
• /
• 1996

In this paper trajectory tracking control problems are described for a robot manipulator by using pneumatic actuator. Under the assumption that the so-called independent joint control is applied to the control system, the dynamic model for each link is identified as a linear second-order system with input time-delay by the step response. Then, an optimal servo controller is designed by taking account of such a time-delay. The effectiveness of the proposed control method is illustrated through some simulations and experiments for the robot manipulator.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.3
• /
• pp.485-492
• /
• 1994

Trajectory tracking control porblems are described for a two-link robot manipulator with artificial rubber muscle actuators. Under the assumption that the so-called independent joint control is applied to the control system, the dynamic model for each link is identified as a linear second-order system with time-lag by the step response. Two control laws such as the feedforward and the computed torque control methods, are experimentally applied for controlling the circular trajectory of an actual robot mainpulator.

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.504-509
• /
• 1990

This paper presents a decentralized adaptive control scheme for multi-Joint robot manipulators based on the independent joint control scheme. The control object is to achieve accurate tracking of desired Joint trajectories. The proposed control scheme does not use the complex manipulator dynamic model, and each joint is controlled simple by a feedback controller which ensure stable and also a position-velocity-acceleration feedforward controller and also auxiliary signal, with adjustable gains. Simulation results are given for a two-link manipulator under independent control, proposed decentralized adaptive control of manipulator is feasible. In spite of a pay load variation and strong static and dynamic couplings that exist between the joints.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.135-139
• /
• 1990

In general, the control of robot arms falls into two board categories (position control and force control). The joint interpolated trajectory schemes generally interpolate the desired joint path by a class of polynomial functions and generate a sequence of time based control set points for the control of a manipulator from a initial location to its destination. A digital position controller was designed and adapted to the industrial balancing manipulator. And also, the joint interpolated trajectory using 3rd order polynomial was generated in this study. The IBM PC used as the main controller and the trajectory planner had enough run-time capabilities. The 8097BH microcontroller is an integral pan of the joint controller which directly controls an axis of motion. The PI servo control system to treat each joint of the robot arm as a independent joint servo mechanism had satisfying performance, and a sequence of time-based intermediate configurations of the manipulator hand showed good continuity and smoothness on position and velocity of the manipulator's joint coordinates along the trajectory.