• Clinical and Experimental Reproductive Medicine
• /
• 제24권3호
• /
• pp.377-383
• /
• 1997

The effects of embryo number and incubation volume on the development of mouse embryos were evaluated. The growth rate of two-cell mouse embryos to attached blastocyst stage and the growth rate of blastocysts to early somite stage were assessed after culture in different incubation volumes and embryo densities. Embryos were collected from ICR female mice superovulated with pregnant mare serum gonadotropin and human chorionic gonadotropin and mated by ICR males. In experiment 1, groups of one, five, ten, twenty 2-cell embryos were cultured in 10-, 50-, 500-, 1000-${\mu}l$ drops of BWW media under mineral oil at $37^{\circ}C$ in a humidified atmosphere of 5% $CO_{2}$ and 95% air. As the incubation volume decreased, significantly (p<0.05) higher rates of embryos reached morular and blastocyst stage on day 3 and 4 culture, respectively. In experiment 2, groups of one, five, ten, twenty blastocysts were cultured in 1- and 2-ml volumes of CMRL 1066 media under same condition as in experiment 1. However the reverse was the result. Decreasing the number of embryos incubated per volume from 1 to 20 significantly (p<0.05) increased the number of blastocysts reaching the late egg cylinder (LEC) and early somite (ES) stage on day 6 and 8 culture, respectively, regardless of incubation volume. Blastocysts cultured in 2ml had higher (p<0.05) development rates to LEC and ES stage on day 6 and 8 culture, respectively, than embryos cultured in 1ml. Our results suggest that the effects of embryo number and incubation volume on the development of mouse embryos are stage specific and the shifting point was between hatching and EEC stage.

• 한국양식학회지
• /
• 제20권3호
• /
• pp.194-198
• /
• 2007

Reproductive traits of Palaemon gravieri such as embryo size, number of embryo (fecundity), incubation period, larval development mode, larval development period, larval survival and larval growth were described and compared to analyze the correlation among those traits. Embryo volume is a primary factor determining other ensuing reproductive features. Egg volume was $0.042mm^3$ in the first developmental stage. Embryo volume in P. gravieri was comparatively small which is indicative of great number of embryo (y = 3.0161x + 0.0185 $R^2$ = 0.74 positive isometric relationship) and relatively long incubation period. Larvae survived from zoea 1 to post-larvae and it took 45 days at $22^{\circ}C$. Survival rate of the larvae was rather great in the early stage and thereafter steadily decreased. Daily growth rate of larvae in P. gravieri at $22^{\circ}C$ was 0.0195 mm on average. They grew steadily as time went by. Incubation period was between 10-14 days at $22^{\circ}C$. Larval development mode was almost complete planktotrophic. PNR (point of no return) appeared to be the third day on average. Survival rate of larvae without feeding declined rapidly between 3 and 4 days. Larval development period and stage frequency were 23-30 days and 11 stages which imply prolonged larval period and high mortality. The pattern of brood production followed fast successive parturial pattern. Most ovigerous female had mature ovary when they performed parturial molt soon after hatching (larval release).

• 한국생산제조학회지
• /
• 제7권6호
• /
• pp.117-125
• /
• 1998

The paper attempts to estimate the incubation time of a cavity in the interface between a power law creep particle and an elastic matrix subjected to a uniaxial stress. Since the power law creep particle is time dependent, the stresses in the interface relax. The volume free energy associated with Helmholtz free energy includes strain energies caused by applied stress and dislocations piled up in interface(DPI). The energy due to DPI is found by modifying the result of Dundurs and Mura[4]. The volume free energies caused by both applied stress and DPI are a function of the cavity size(r) and elapsed time(t) and arise from stress relaxation in the interface. Critical radius $r^*$ and incubation time $t^*$ to maximise Helmholtz free energy is found in present analysis. Also, kinetics of cavity formation are investigated using the results obtained by Riede [7]. The incubation time is defined in the analysis as the time required to satisfy both the thermodynamic and kinetic conditions. Through the analysis it is found that 1) strain energy caused by the applied stress does not contribute significantly to the thermodynamic and kinetic conditions of a cavity formation, 2) in order to satisfy both thermodynamic and kinetic conditions, critical radius $r^*$ decreases or holds constant with increase of the time until the kinetic condition(eq. 2.3) is satisfied. there for the cavity may not grow right after it is formed, as postulated by Harris [15], and Ishida and Mclean [16], 3) the effects of strain rate exponent (m), material constant $\sigma$0, volume fraction of the particle to matrix(f)and particle size on the incubation time are estimated using material constants of the copper as matrix.

• Fisheries and Aquatic Sciences
• /
• 제13권4호
• /
• pp.308-314
• /
• 2010

Larvae of Palaemon serrifer were reared in the laboratory under three different temperature regimes ($15^{\circ}C$, $20^{\circ}C$, $25^{\circ}C$) to study the effects of rearing temperature on larval survival and growth, as well as other traits such as embryo volume, number of embryos (fecundity), incubation period, development. Mode and development period. Growth pattern was analyzed by measuring the molt increment and intermolt period. The intermolt period consistently increased with size and instar number and was shortest at $25^{\circ}C$. However, molt increments generally decreased with instar number. Number of embryos varied from 552 to 1355. The relationship between the number of embryos and carapace length was expressed by the equation (fecundity) y=2.7744x+0.208 ($R^2$=0.7961). Egg volume was a primary factor affecting other life-history traits. Egg volume was $0.078\;m^3$, which is relatively small thus embryos exhibited a relatively short incubation period and a comparatively short development period, and the nutritional mode was planktotrophic. Brood production was followed by a fast parturitional pattern. Most ovigerous females had mature ovaries when the parturial molt occurred soon after eclosion.

• 한국식품과학회지
• /
• 제33권3호
• /
• pp.294-300
• /
• 2001

저장 방법의 차이에 따른 유과의 과산화물가는 대바구니 포장이 가장 높았으며, 질소 치환 포장, 냉동 저장 순으로 나타났고, 저장 기간 증가에 따라 현저히 증가하였다. 콩물 농도가 증가함에 따라 과산화물가도 증가하였으나 incubation 시간 증가에 따른 차이는 유의적이지 않았다. 유과의 hardness는 콩물 농도, incubation 시간과 저장 기간의 증가에 따라 현저한 감소를 나타냈으나 저장 방법간에는 유의적인 차이를 나타내지 않았다. Peak number는 저장 기간 10주까지는 냉동 저장군이 다른 군보다 높게 나타났으나, 12주에는 이러한 차이가 나타나지 않았고, 저장 기간 증가에 따라서 증가하였다. 저장 3개월 후 관능 검사 결과, 유과의 색은 저장 방법과 콩물의 농도에 따라서 용적 증가율은 콩물 농도와 incubation 시간에 따라 유의적인 차이가 있었다. 산패취는 저장 방법에 따라서만 유의적인 차이가 있었으며, 부드러운 정도, 맛, 종합적 기호도는 콩물의 농도에 따라서만 유의적 차이가 있었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제29권1호
• /
• pp.73-79
• /
• 2016

The objective was to evaluate the effect of fodder tree species (FTS) with condensed tannin contents: Cordia elaeagnoides, Platymiscium lasiocarpum, Vitex mollis, and Haematoxylon brasiletto, on in vitro methane ($CH_4$) production at 24 h post incubation. The analysis was performed using the in vitro gas production technique, with three levels of inclusion/species: 600, 800, and 1,000 mg and with 4 replicates/species/level of inclusion. The substrate was incubated at $39^{\circ}C$, and the gas and $CH_4$ production were recorded at 4, 8, 12, and 24 h post incubation. The data collected was analyzed through Pearson correlation, polinomial regression and fixed effects models. There were negative correlations between FTS-total gas volume (r = -0.40; p<0.001); FTS-volume of $CH_4$ produced (r = -0.40; p<0.001) and between the inclusion level-volume of $CH_4$ produced (r = -0.20; p<0.001). As well as a positive correlation between hours post incubation-total gas volume (r = 0.42; p<0.001) and between hours post incubation-volume of $CH_4$ produced (r = 0.48; p<0.001). The FTS: C. elaeagnoides, V. mollis, and H. brasiletto have potential, in the three inclusion levels analyzed, to reduce $CH_4$ emission on in vitro trials (>32.7%), taking into account the total $CH_4$ production at 24 h of the forage used as reference (Avena sativa). It's suggested that C. elaeagnoides-according to its crude protein, neutral detergent fiber, and condensed tannins content- is the best alternative within the FTS analyzed, for feeding ruminants and for the control of $CH_4$ emissions during the dry season.

• 한국가축번식학회지
• /
• 제13권1호
• /
• pp.18-25
• /
• 1989

This study was carried out to investigate the general semen characteristics of the Korean native goat and the effect of temperature, incubation time, dilution rate, freezing rate and glycerol concentration on motility and NAR (normal apical ridge) acrosome of fresh and frozen Korean native goat spermatozoa. 1. Average semen volume per ejaculate, motility, concentration and pH of fresh Korean native goat spermatozoa were 0.19${\pm}$0.09 ml, 94.5${\pm}$0.47%, 26.17${\times}$108${\pm}$1.68/ml and 6.63${\pm}$0.18, respectively. 2. Motility and NAR acrosome of fresh spermatozoa during incubation were higher at 22$^{\circ}C$ than at 5$^{\circ}C$ or 37$^{\circ}C$(P<.01). 3. Motility and NAR acrosome of spermatozoa diluted 1:4 during incubation were higher at 22$^{\circ}C$ than at 5$^{\circ}C$ or 37$^{\circ}C$(P<.01). 4. Motility and NAR acrosome of spermatozoa during incubation were higher for samples diluted 1:1, 1:2, or 1:4 than for samples diluted 1:6(P<.01). 5. Motility and NAR acrosome of post-thaw spermatozoa were higher at freezing rate of 12$^{\circ}C$/min than at freezing rate of 1$^{\circ}C$/min or 24$^{\circ}C$/min when glycerol concentration was 9%(P<.01).

• Journal of Theoretical and Applied Mechanics
• /
• 제1권1호
• /
• pp.69-88
• /
• 1995

The paper attempts to estimate the incubation time of a cavity in the interface between a power law creep particle and an elastic matrix subjected to a uniaxial stress. Since the power law creep particle is time dependent, the stresses in the interface relax. Through previous stress analysis related to the present physical model, the relaxation time is defined by ${\alpha}$2 which satisfies the equation $\Gamma$0 ｜1+${\alpha}$2k｜m=1-${\alpha}$2 [19]. $\Gamma$0=2(1/√3)1+m($\sigma$$\infty$/2${\mu}$)m($\sigma$0/$\sigma$$\infty$tm) where $\sigma$$\infty$ is an applied stress, ${\mu}$ is a shear modulus of a matrix, $\sigma$$\infty$ is a material constant of a power law particle, $\sigma$=$\sigma$0 $\varepsilon$ and t elapsed time. the volume free energy associated with Helmholtz free energy includes strain energies associated with Helmholtz free energy includes strain energies caused by applied stress anddislocations piled up in interface (DPI). The energy due to DPI is found by modifying the results of Dundurs and Mura[20]. The volume free energies caused by both applied stress and DPI are a function of the cavity size(${\gamma}$) and elapsed time(t) and arise from stress relaxation in the interface. Critical radius ${\gamma}$ and incubation time t to maximize Helmholtz free energy is found in present analysis. Also, kinetics of cavity fourmation are investigated using the results obtained by Riede[16]. The incubation time is defied in the analysis as the time required to satisfy both the thermodynamic and kinetic conditions. Through the analysis it is found that [1] strain energy caused by the applied stress does not contribute significantly to the thermodynamic and kinetic conditions of a cavity formation, 2) in order to satisfy both thermodynamic and kinetic conditions, critical radius ${\gamma}$ decreases or holds constant with increase of time until the kinetic condition(eq.40) is satisfied. Therefore the cavity may not grow right after it is formed, as postulated by Harris[11], and Ishida and Mclean[12], 3) the effects of strain rate exponent (m), material constant $\sigma$0, volume fraction of the particle to matrix(f) and particle size on the incubation time are estimated using material constants of the copper as matrix.

• 한국토양비료학회지
• /
• 제49권5호
• /
• pp.461-468
• /
• 2016

One of the important phytohormones produced by plant growth promoting bacteria is the auxin; indole-3-acetic acid (IAA), with L-tryptophan as the precursor. In this study, we focused on the investigation of optimal conditions for the production of IAA by Bacillus megaterium BM5. We investigated culturing conditions, such as incubation temperature, pH of the culture medium and incubation period, with varying media components such as inoculation volume, tryptophan concentration and carbon and nitrogen source. Besides, optimization study intended for high IAA production was carried out with fermentation parameters such as rpm and aeration. The initial yield of $42{\mu}g\;IAA\;ml^{-1}$ after 24 hr increased to $85{\mu}g\;ml^{-1}$ when 5% (v/v) of L-tryptophan was used in the culture broth. The maximum yield of $320{\mu}g\;IAA\;ml^{-1}$ was observed in trypticase soy broth (TSB) supplemented with starch and soybean meal as C and N sources with a C/N ratio of 3:1 (v/v) at $30^{\circ}C$, pH 8.0 for 48 hrs with 1.0 vvm and 250 rpm in 5 L working volume using 10 L scale fermenter. The bacterial auxin extracted from the culture broth was confirmed by thin layer chromatography and high-performance liquid chromatography and effect on plant growth was confirmed by root elongation test.

• 한국재료학회지
• /
• 제14권7호
• /
• pp.477-481
• /
• 2004

High quality polycrystalline silicon is very critical part of the high quality thin film transistor(TFT) for display devices. Metal induced lateral crystallization(MILC) is one of the most successful technologies to crystallize the amorphous silicon at low temperature(below $550^{\circ}C$) and uses conventional and large glass substrate. In this study, we observed that the MILC behavior changed with abrupt variation of the amorphous silicon active pattern width. We explained these phenomena with the novel MILC mechanism model. The 10 nm thick Ni layers were deposited on the glass substrate having various amorphous silicon patterns. Then, we annealed the sample at $550^{\circ}C$ with rapid thermal annealing(RTA) apparatus and measured the crystallized length by optical microscope. When MILC progress from narrow-width-area(the width was $w_2$) to wide-width-area(the width was $w_1$), the MILC rate decreased dramatically and was not changed for several hours(incubation time). Also the incubation time increased as the ratio, $w_1/w_2$, get larger. We can explain these phenomena with the tensile stress that was caused by volume shrinkage due to the phase transformation from amorphous silicon to crystalline silicon.