• 한국구조물진단유지관리공학회 논문집
• /
• 제12권5호
• /
• pp.143-151
• /
• 2008

본 연구에서는 2차 비탄성해석과 단면점증법을 이용한 평면 강골조 구조물의 최적설계 방법을 제시하였다. 2차 비탄성해석은 구조시스템과 그에 속한 부재들의 기하학적 비선형과 재료적 비선형을 고려하기 때문에 2차 비탄성해석에 바탕을 둔 설계법에서는 해석 후 개별부재의 강도검토가 필요 없다. 본 논문에서 제안한 단면점증법을 최적화 기법으로 사용하였으며 목적함수로 구조물의 중량을 사용하였다. 제약조건식은 구조시스템의 하중-저항능력, 처짐 및 층간 수평변위 등을 고려하였으며 제안된 방법에 의한 설계결과를 다른 방법에 의한 것들과 비교하여 그 효율성을 증명하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제13권2호통권54호
• /
• pp.153-164
• /
• 2009

본 논문에서는 2경간 강합성교량의 내하력을 향상시키기 위해, 외부 긴장재로 보강하는 방법을 제시하였다. 긴장재를 직선 배치하였을 경우, 외부하중으로 인한 증가 프리스트레스력을 가상일의 원리로 구하였고, 증가 프리스트레스를 고려한 내하율 산정식을 제시하였다. 제안된 내하율 산정식으로부터, 긴장재 개수와 초기 긴장력의 계산방법을 제시하였다. 본 방법을 2경간 강합성교량에 적용하여, 산정식의 타당성과 합리성을 검증하였다.

• 대한토목학회논문집
• /
• 제8권1호
• /
• pp.159-164
• /
• 1988

연직하중(鉛直荷重), 구속압(拘束壓) 및 torque를 각각 독립적으로 작용시킬 수 있는 비틀림전단시험(剪斷試驗)을 실시하여 주응력축(主應力軸)을 회전(回轉)시켰을 경우, 변형율증분방향(變形率增分方向)과 응력방향(應力方向) 혹은 응력증분방향(應力增分方向) 사이의 관계가 조사되었다. 이 비틀림전단시험(剪斷試驗)은 $K_0$-압밀점토시료(壓密粘土試料)에 대하여 비배수(非排水) 및 배수(排水) 상태하에서 주응력축회전(主應力軸回轉)이 가능한 전 응력경로(應力徑路)로 실시되었다. 본(本) 연구(硏究)결과 파괴시의 변형율증분(變形率增分)벡터의 방향은 응력(應力)벡터방향과 일치함을 알 수 있었다. 즉 변형율증분(變形率增分)벡터방향은 초기의 낮은 응력단계(應力段階)에서는 응력증분(應力增分)벡터 방향과 일치하지만 높은 응력단계(應力段階)에서는 응력(應力)벡터방향과 일치하게 된다. 이는 점토(粘土)의 거동(擧動)이 응력의 증가에 따라 탄성(彈性)에서 소성(塑性)으로 변천되어 감을 의미한다. 따라서 주응력축회전(主應力軸回轉)시의 점토거동(粘土擧動)의 구성식화(構成式化)에는 탄소성이론(彈塑性理論)의 적용이 가능함이 입증되었다.

• Journal of Preventive Medicine and Public Health
• /
• 제44권3호
• /
• pp.111-117
• /
• 2011

Objectives: This study measured the impact of shifts in maternal age and parity on the increase in the low birth weight (LBW) rate in Korea. Methods: We obtained raw data for all 6 397 945 live births registered at the Korea National Statistical Office between 1995 and 2005. We calculated the proportion of increment in the LBW rate due to changes in the distribution of maternal age and parity (AP-dis) and the proportion due to changes in the age- and parity-specific LBW rate (AP-spe). Results: The LBW rate increased from 3.02% in 1995 to 4.28% in 2005. The multiple birth rate increased from 1.32% to 2.19% during the same period. Of the 1.26% points increment in the LBW rate, 0.64% points occurred among singleton births and 0.62% points occurred among multiple births. Changes in the AP-dis accounted for 50% of the increase in the LBW rate among singleton births, but did not contribute to the increase in the LBW rate among multiple births. The remainder of the total increment in the LBW rate was explained by the increase in the AP-spe. Conclusions: This study demonstrated that shifts in maternal age and parity among singleton births and increased multiple births were important contributors to the increment in the LBW rate. This study also revealed that the increase in the AP-spe was an equally important contributor as the shifts in maternal age and parity to the increment in the LBW rate among singleton births and was a major contributor among multiple births.

• 대한약리학회지
• /
• 제12권2호
• /
• pp.21-32
• /
• 1976

The influence of Panax ginseng and Acanthopanax on the metabolism of hens are studied experimentally. The hens are fed with three dose levels of ethanol extract of Panax ginseng and Acanthopanax for 24 months and for comparing, there are control hens and young control hens. The results are as follows. 1. Hemoglobin, hematocrit and erythrocyte sedimentation rate values of hens fed with Panax ginseng and Acanthopanax are not significantly. different from control group. There is tendency of decreasing of erythrocyte sedimentation rate with aging. 2. The serum total lipid values of hens fed with Panax ginseng and Acanthopanax have tendency of increment compared with control group, especially in large dose treated hens of Panax ginseng and it is statistically significant. The serum cholesterol levels of all treated hens seem to be increased without significance statistically. Serum triglyceride level is higher in young hens compared with aged, and Panax ginseng and Acanthopanax treated hens reveal much higher values than control hens. So the increment of triglyceride levels in the Panax ginseng and Acanthopanax treated hens may be mainly contribute to increment of total lipid content. 3. Long-term administration of Panax ginseng and Acanthopanax seem to increase total serum protein content. Such increment seem to be due to the increment of globulin, especially gamma globulin, which is statistically significant in the large dose group of Acanthopanax. There are no differences of serum albumin levels of all the groups. 4. The blood glucose level and the glycogen content of liver and muscle have no difference among all the experimental groups. To summarize the results, the effects of Panax ginseng and Acanthopanax on the metabolism of hens have similarity in the majority of data of this experiment, and seem to be mainly influence to lipid and protein metabolisms by increasing serum triglyceride and globulin, especially gamma globulin.

• 한국항만학회지
• /
• 제14권3호
• /
• pp.331-340
• /
• 2000

For the rational and economic design of the structural elements of ships which is built using welding, the ultimate strength analyses of the plates having initial imperfections, such as welding residual stresses and strains, are needful. The welding deformation usually relied on approximative equations or based on expert's experience. But in this paper, for the thermal elasto-plastic analysis of plates, the finite element analysis was performed, based on initial strain method. In formulating the incremental analysis, unbalanced force terns were included. In the plastic domain during the incremental process, the 2nd order terns stress increment and yield stress increment were considered, so that time increment could be controlled for a more stable solution. The ultimate strength analysis program of the plates having initial imperfections was made. The ultimate strength analysis was carried out based on the results of the welding deformations of this paper. In the ultimate strength analysis the Rayleigh-Ritz method based on the minimum potential theory was used.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.773-777
• /
• 1995

This thesis attempt to explore the shape of stress wave propagation of 3-dimensional stress field which is made in the process of time increment. A finite element code about 3-dimensional stress wave propagation is developed for investigating the changing shape of the fracture by the impact load. The Finite Element Code, which is the solution for the 3-dimensional stress wave analysis, based on Galerkins and Newmark- .betha. method at time increment step. The tensile stress and compressive stress become larger with the order of the middle, the upper and the opposite layers when the impact load is applied. In a while the shear stress become larger according to the order of the upper, the middle and the opposite layers when impact load applied.

• Tribology and Lubricants
• /
• 제14권4호
• /
• pp.7-14
• /
• 1998

A correlation between the low-cycle fatigue life and the scuffing-failure life is demonstrated using the plastic strain increment in boundary lubricated sliding. Loadings proportional to hardness with three different lubricated conditions were used to evaluate the plastic strain increments. As the results of scuffing tests using vacuum pump oils in nitrogen gas, plastic strain increment shows 0.0062, and in the mineral oils and commercial engine oils in air, plastic strain increments show 0.0042 and 0.00092. Those are very useful to describe quantitatively the real lubricated sliding conditions, and are very effective to find the relation between the low-cycle fatigue life and the scuffing-failure life.

• 한국농공학회논문집
• /
• 제51권6호
• /
• pp.83-90
• /
• 2009

This study was carried out to evaluate the vertical stress properties in sandy soil according to changes of loading type in soil bin compacted three layers. The following conclusions and comparisons have been made based on careful analysis from theoretical and experimental methods. : When sandy soil subjected to cycle-loading, compression of foundation and diffusion of vertical stress increment(${\Delta}{\sigma}_2$) were influenced by magnitude of loading plate. When sandy soil subjected to reloading after removing of pre-loading, the distribution of ${\Delta}{\sigma}_2$ depth at one time of loading plate width was different from its distribution at more deep point cause of load hysteresis, so in case of design of structure, the effect of ${\Delta}{\sigma}_2$ as depth must be considered. The increment of vertical stress will be different as loading condition and foundation depth, the loading condition must be considered in case of structure design.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.199-202
• /
• 2003

A study for permeability and erosion characteristics of short fiber reinforced soils was performed. As mixing ratio increases from 0 to 1.0% permeability of short fiber reinforced soils increased but, maximum increment ratio($k_{1.0%}/k_{0%}$) was 8.47. As a result of permeability test with 19, 38 and 60mm fiber reinforced soils, there were no difference in fiber length. Void ratio increased with increment of mixing ratio and decrease of compaction energy and as a result of plotting permeability and void ratio, log k increased linearly by void ratio. As a result of erosion test, soil erosion was decreased sharply by increase of fiber mixing ratio up to 1.0%. Despite increase of soil erosion by slope angle, the increment ratio was decreased by mixing ratio.