• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.11
• /
• pp.1603-1611
• /
• 2021

As IMO environmental regulations are tightened, the need to establish a system that can reduce emissions is increasing, and for this purpose, various power control management systems have been studied and implemented as a new energy management system for ships. In this study, we design a control process through modeling for Bi-Directional Converter (BDC) application with bi-directional power flow to link batteries, which are energy storage devices, to conventional generator power systems, and propose mechanisms for batteries optimized for varying loads. This work models MATLAB/Simulink as a BDC and simulates current control and state of charge (SOC) optimization at the time of charging and discharging batteries according to load scenarios. Through this, the battery, power, and load were interlocked so that the generator operated on board could be operated in the optimal operation range, and power control management was performed to enable the generator to operate in the high fuel efficiency range.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.2
• /
• pp.231-238
• /
• 2011

A role of Distribution Automation System(DAS) is required to be changed from observing and control to complex and various new system including functions which monitoring, control, prediction, operation and management of EMS type according to be gradually Smart Grid of distribution operation system for development of further power system industrial. IEC(International Electrotechnical Commission) published communication standards which interface and data model of distribution operation system to IEC 61968 and of host system like EMS(Energy Management System) to IEC 61970. So far, each standards are emphasizing themselves, but if they are applied by designed integration of the standards, it could be more efficiency system. So, in this paper, integration application of IEC standards and structure of further distribution operation system to use them are proposed by gradually increasing importance of communication protocols, functions and roles in further distribution management system considering Smart Grid.

• KEPCO Journal on Electric Power and Energy
• /
• v.7 no.1
• /
• pp.73-77
• /
• 2021

As the big data analysis technologies has been developed worldwide, the importance of asset management for electric power facilities based data analysis is increasing. It is essential to secure quality of data that will determine the performance of the RISK evaluation algorithm for asset management. To improve reliability of asset management, asset data must be preprocessed. In particular, the process of cleaning dirty data is required, and it is also urgent to develop an algorithm to reduce time and improve accuracy for data treatment. In this paper, the result of the development of an automatic cleaning algorithm specialized in overhead transmission asset data is presented. A data cleaning algorithm was developed to enable data clean by analyzing quality and overall pattern of raw data.

• Journal of Energy Engineering
• /
• v.21 no.1
• /
• pp.81-85
• /
• 2012

Electricity is the basic building block of economic development, and constitutes one of the vital infra-structural inputs in socio-economic development. The demand for electricity has been increasing due to extensive urbanization, industrialization, and a rise in the standard of living, as is the case with residential electricity consumption. This paper attempts to estimate the consumer surplus and the economic value of the residential consumption of electricity in Seoul to assist in decision-making in electricity management. The estimated consumer surplus represents the value of the area under the demand curve, above the actual price that is paid for residential electricity consumption. The estimated annual consumer surplus and economic value for the year 2005 amount to 2,144.7 and 3,727.4 billion won, respectively. The estimates per kWh were 184.9 and 316.0 won, respectively, which imply that the consumer surplus and the economic value of residential electricity consumption significantly outweigh the average price of electricity in 2005 of 91.1 won per kWh.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.21 no.4
• /
• pp.302-311
• /
• 2016

This paper proposes a hybrid ESS that integrates an energy storage system (ESS) with an uninterruptible power supply (UPS). The hybrid ESS has a demand management and emergency power supply function while increasing the battery utilization of the UPS, which has just been used in a power failure. In addition to the critical load, the proposed system augments the capacity of emergency generation using an additional load, which has voltage and frequency-dependent characteristics to the grid side. The control algorithm of the AC-DC converter and bidirectional DC-DC converter is proposed for demand management and emergency power supply. Furthermore, seamless and autonomous transfer methods to alleviate the transient during mode transfer are proposed. To validate the proposed control scheme, experimental results from a 5 kW prototype are provided.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.5B no.4
• /
• pp.382-391
• /
• 2005

Increasing of the nonlinear type power electronics equipment, power conditioning systems (PCS) have been researched and developed for many years in order to compensate for harmonic disturbances and reactive power. PCS's not only improve harmonic current and power factor in the ac grid line but also achieves energy saving used by the renewable energy source (RES). In this paper, the implementation of a current controlled voltage source inverter (CCVSI) using RES for PCS is presented. The basic principle and control algorithm is theoretically analyzed and the design methodology of the system is discussed. The proposed system could achieve power quality control (PQC) to reduce harmonic current and improve power factor, and demand side management (DSM) to supply active power simultaneously, which are both operated by the polarized ramp time (PRT) current control algorithm and the grid-interactive current control algorithm. A 1KVA test model of the CCVSI has been built using IGBT controlled by a digital signal processor (DSP). To verify the proposed system, a comprehensive evaluation with theoretical analysis, simulation and experimental results is presented.

• Journal of Korean Society of Forest Science
• /
• v.44 no.1
• /
• pp.43-47
• /
• 1979

Increased demand for wood products and recent energy crisis have stimulated much attention over the world to the concept of intensive forestry management systems. This shows great potential of increasing biomass yields. Biomass probably will not be a major source to solve the whole problems of fiber and energy shortage but as an alternative source it will, in part, help meet the remarkable demand. In Korea, the systems are not only feasible because of available land areas, many appropriate tree and existing forestry techniques already available, but also urgently needed.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.13 no.3
• /
• pp.151-160
• /
• 2018

NAND flash memories have the advantages of fast access speed, high density and low power consumption, thus they have increasing demand in embedded system and mobile environment. Despite the low power and fast speed gains of NAND flash memory, DRAM disk buffers were used because of the performance load and limited durability of NAND flash cell. However, DRAM disk buffers are not suitable for limited energy environments due to their high static energy consumption. In this paper, we propose WAP-LRU (Write pattern Analysis based Placement by LRU) hybrid disk buffer management policy. Our policy designates the buffer location in the hybrid memory by analyzing write pattern of the workloads to check the continuity of the page operations. In our simulation, WAP-LRU increased the lifetime of NAND flash memory by reducing the number of garbage collections by 63.1% on average. In addition, energy consumption is reduced by an average of 53.4% compared to DRAM disk buffers.

• Journal of the Korea Safety Management & Science
• /
• v.7 no.4
• /
• pp.229-248
• /
• 2005

The purpose of this study is to identify the best firing condition for Celadon, which is one of the famous traditional pottery to represent Korean culture, by minimizing energy consumption, cutting firing time, shortening the time of processing ceramic making, in order to, save energy as well as to protect the potters' health. Most Korean potter starts their reduction from $950^{\circ}C$ to change kiln atmosphere. However on this study, reduction have started from $950^{\circ}C\;to\;1200^{\circ}C$ by increasing $50^{\circ}C$ at a time. Then the results are analyzed to be compared to previous Celadon, in colors, chroma, and brightness. As a results, it is found, that the best temperature for starting reduction is $1100^{\circ}C$, when chroma and brightness values to meet same with previous celadon. Therefore the best condition could be made by starting the reduction on $1100^{\circ}C$ to fire celadon, which would have shorten 2 hours of firing process and, at the same time, it could have saved the energy by 12%.

• Journal of Hydrogen and New Energy
• /
• v.34 no.6
• /
• pp.758-766
• /
• 2023

Multi-copter of unmanned aerial vehicle (UAV) was initially developed as strategic technology in the only military field, but it is developing into an industrial field with a wide range of applications in the civil sector based on the development and convergence of aviation technology and information and communication technology. Currently, the degree of utilization of multi-copter is increasing in various industries for the purpose of performing classic tactical missions, logistics transportation, farm management, internet supply, video filming, weather management, life-saving, etc, and active technology development responding to market demand. Existing commercial multi-copter mainly use an electric energy propulsion system consisting of an electric battery and a brushless direct current (BLDC) motor. It is the limitations for usage in the flying time (up to 20 minutes) and payload (less than 20 kg). this study aims to overcome these limitations and expand the commercialization of engine-powered multi-copter of UAV in various industries in the futures.