• 한국연초학회지
• /
• 제18권1호
• /
• pp.49-53
• /
• 1996

This experiment was carried out to study the effect of oxygen on chemical composition and physical properties of tobacco leaves during flue-curing. The results obtained were as follows: Starch content decreased and sucrose content increased with increasing oxygen supply during curing. Glucose and fructose of the cured leaves showed high content at the 5-10% oxygen supply. Amino-N and nitrate-N increased with increasing oxygen supply. Total nitrogen and NH4-N showed the lowest value at the 5-10% and 10-15% oxygen supply in the cutters and leaf, respectively. Chlorophyll and chlorogenic acid increased, and total volatile base decreased with increasing oxygen supply. The activity of α-amylase increased at the latter period of flue-curing, and the maximum activity point were delayed 12 hours with increasing oxygen supply. Shatter index of cured leaves decreased with increasing oxygen supply. It was desirable to supply oxygen during flue-curing for the improvement of chemical and physical properties such as starch, total sugar, chlorogenic acid, and shatter index of cured leaves.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1013-1015
• /
• 1995

The electrical properties of Al/TiN/Ti contact according to post anneal ins conditions are investigated at submicron contacts. $N^+$ contact resistance increases with increasing alloy temperature while $P^+$ contact resistance slightly decreases. The contact tentage current increases wi th increasing alloy temperature for both $N^+$ and $P^+$ contacts. The contact resistance and leakage current of $N^+$ contact increases with increasing alloy tide. $P^+$ contact resistance decreases with increasing alloy time but $P^+$ contact tentage current increases. The contact resistance and contact leakage current increases with increasing alloy cycles for both $N^+$ and $P^+$ contacts.

• 동아시아식생활학회지
• /
• 제20권4호
• /
• pp.524-530
• /
• 2010

The purpose of this study was to determine the characteristics of noodles with added Polygonati odoratum powder. Noodles' water binding capacity increased with increasing amounts of Polygonati odoratum powder. Solubility and swelling power increased with the temperature increasing proportionally to the amounts of added Polygonati odoratum powder. The gelatinization time decreased with increasing of Polygonati odoratum powder. The rate of weight increase and water absorption of cooking noodles decreased with increasing Polygonati odoratum powder. But the turbidity of the soup increased. With increasing Polygonati odoratum powder, L-values were shown to decrease and a and b value were increased. The results of sensory evaluation were that noodles containing under 5% Polygonati odoratum powder were rated as high-quality noodles.

• 한국전기전자재료학회논문지
• /
• 제30권11호
• /
• pp.693-698
• /
• 2017

In this study, the thermal degradation properties of polyethylene terephthalate film has been examined by the capacitance, Tan ${\delta}$, thermography, FTIR, and SEM results at temperatures of $90{\sim}170^{\circ}C$ and frequencies of 0.3~3,000 kHz. It was found that the capacitance decreased with increasing thermal imaging temperature, probably caused by weakening of chemical bond with increasing temperature. Tan ${\delta}$ decreased upon increasing temperature from $90^{\circ}C$ to $170^{\circ}C$, probably due to the molecular motion of COOH radical or OH radical. The FT-IR measurement reveals that no structural change of the material occurs upon thermal radiation. The SEM measurement shows that the material is stabilized by thermal decomposition with increasing temperature; however, excessive thermal degradation obstructs the stabilization of the material.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.393-398
• /
• 2002

In this study, the increasing gear boxes for the high speed vertical in-line centrifugal pump are developed through rotor dynamic analysis. The developed increasing gear boxes are two kinds for 18000rpm and 25000rpm at the output shaft. The gear sets suitable for high speed and high load are manufactured by investigating AGMA bending strength and AGMA surface strength severely. The rotor dynamic analysis on gear sets and bearings is performed in order to avoid the critical speeds and other troubles. As a result of study, the two increasing gear boxes for the high speed vertical in-line centrifugal pump are designed and manufactured.

• 동아시아식생활학회지
• /
• 제19권2호
• /
• pp.216-223
• /
• 2009

The objective of this study was to assess the characteristics of Sikhe prepared with Astragalus membranaceus water extracts. The pH of the Sikhe increased with increasing amounts of the added extract. The L value (Lightness) decreased with increasing extract content, whereas the a and b values increased with increasing amounts of extracts. The saccharinity of the Sikhe also increased with increasing amounts of the extract. The microbial cell counts of the Sikhe samples presented no distinct differences in the early storage period, but the total microbial cell counts decreased with increasing concentrations of the extract over a longer storage period. Adding the extract did not affect the sensory characteristics of the Sikhe. Thus, according to our results, the addition of Astragalus membranaceus water extract has no impact on the sensory characteristics of Sikhe and can reduce the amount of added sugar. In addition, these results indicate Astragalus membranaceus may inhibit normal microbial growth and extend the shelf life of Sikhe.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2010년도 춘계 학술논문 발표대회 1부
• /
• pp.105-109
• /
• 2010

Nowadays, the construction of high-rise building is rapidly increasing. There are many cost-increasing factors to the management in the high-rise building construction. For large and complex projects like the high-rise building construction, the more systematic methods and tools are needed for cost control. It is important to identify major cost control items and to manage them for effective cost management in the high-rise building construction. This study proposes a method of identifying major cost-increasing factors in the high-rise building construction based on the Delphi method.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.343.1-343
• /
• 2002

In this study, the increasing gear boxes for the high speed vertical in-line centrifugal pump are developed through rotor dynamic analysis. The developed increasing gear boxes are two kinds fur 18000rpm and 25000rpm at the output shaft. The gear sets suitable for high speed and high load are manufactured by investigating AGMA bending strength and AGMA surface strength severely. The rotor dynamic analysis on gear sets and bearings is performed in order to avoid the critical speeds and other troubles. As a result of study, the two increasing gear boxes for the high speed vertical in-line centrifugal pump are designed and maunfactured.

• Bulletin of the Korean Chemical Society
• /
• 제35권12호
• /
• pp.3489-3494
• /
• 2014

In search of new antileukopenia agents, twenty dithiolopyrrolone derivatives were synthesized and evaluated for their leukocyte-increasing activities in normal mice. Among the synthesized compounds 4-23, compounds 5 and 6 showed significant leukocyte-increasing activity ( p < 0.01), and compounds 4, 9 and 16 had a moderate effect ( p < 0.05). Compound 5 also displayed stronger leukocyte-increasing activity than that of the positive recombinant human granulocyte colony stimulating factor (rhG-CSF). Above all, compound 5 would be a potential antileukopenia agent which deserved further research.

• 지역연구
• /
• 제14권1호
• /
• pp.1-20
• /
• 1998

In this paper, the authors studied a comprehensive study of national physical distribution costs used here was originally developed by J. L. Heskett(1962) and modified in Korean context by Oh-Kyung Kwon(1997). Using this method the authors calculated national physical distribution costs in Korea from 1984 to 1996. Unlke the major industrialized countries, national physical distribution costs in Korea showed continuous increasing trend in every senses. Using this time series data on physical distribution costs, we analysis the inefficiencies in the physical distribution and figured out the sources of these inefficiencies. The major sources of increasing physical distribution costs in Korea were (1) increasing traffic congestion measured by number of automobiles per road-kilometer, (2) increasing real wages, and (3) high interest rates. Especially, alternatives adopted by firms facing increasing traffic congestion were buying more vehicles, which in turn caused more serious congestion ever. This inefficient cycle in physical distribution area should be cut somehow in order to restore national competitiveness of Korean frims by reducing physical distributins costs.