• 한국식품저장유통학회지
• /
• 제30권5호
• /
• pp.868-874
• /
• 2023

골담초(Caragana sinica Rehder) 꽃의 고부가가치화와 활용도 증대에 필요한 기초 자료인 건조특성을 파악하기 위하여, 만개한 골담초 꽃을 4월 중순에 채취하여 각기 다른 온도(50℃, 60℃, 70℃, 80℃, 90℃)에서 열풍건조하고 분쇄하여 얻은 분말과 이의 열수 추출물의 이화학적 성질을 조사하였다. 골담초 꽃의 건조속도는 열풍온도와 비례함을 보였다. 건조 꽃의 시각적인 색상은 50℃에서 건조한 것이 꽃받침 부위의 녹색이 비교적 강하였고, 반면에 90℃에서 건조한 것은 갈변이 비교적 심하였다. 분말의 기계적 색도 중 녹색도인 -a^*값은 온도가 높아질수록 증가함을 보였다. 또한, 황색도인 b^*값은 70℃ 이상의 온도에서는 승온에 따라 낮아짐을 보였다. 열수 추출물의 가용성 고형분 함량은 70℃까지 증가한 후 일정 수준을 유지하였고, pH는 승온에 따라 감소함을 보였다. 열수 추출물의 총폴리페놀 함량은 승온에 따라 증가하는 경향을 나타내었고, DPPH 소거능은 70℃까지 증가한 후 뚜렷한 변화를 보이지 않았다. 이로써 열풍건조 온도가 골담초 꽃의 이화학적 특성에 유의적인 영향을 미치는 것이 확인되었고, 적합한 열풍건조 온도는 고유색 유지 목적이면 50℃ 이하가, 높은 열수 추출수율과 항산화능을 고려하면 70℃인 것으로 판단되었다.

• 한국식품영양학회지
• /
• 제21권4호
• /
• pp.485-491
• /
• 2008

This study investigated the quality characteristics of the white pan breads with garlic powder. Three different powder concentration levels of 1%, 2% and 3% were added to flour to make the breads. The contents of moisture and crude fat of the breads added with garlic powder were lower than that of control group. However, ash content was not significantly different among groups. The pH increased with increasing garlic powder concentration. The weight of breads increased with increasing garlic powder concentration, while the volume and baking loss rate of breads decreased. In color values, with increase of garlic powder concentration, L value decreased, but a and b values increased. The water activity in the breads decreased by increasing garlic powder concentration was the highest in the control group. In the texture analyzer measurement, hardness of the breads increased with increases of garlic powder concentration, but springiness decreased. In the results of sensory evaluation, the quality of the 1% garlic powder breads showed the highest in taste, flavor and overall acceptability. The color, appearance, mouth feel and texture of the breads decreased with the increasing garlic powder content. From the results of this study, the white breads with 2% garlic powder content was shown to have the best quality.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.315-322
• /
• 2003

Cyclic simple shear tests were performed to find out the effect of preshear on dynamic strength of the sandy soil. Tests were performed for the specimens with 40% and 60% of relative density, under three different effective vertical stress of 50, 100 and 200kPa. For 50 and 100kPa, preshear ratios 0.00, 0.08, 0.12 and 0.16 were given, respectively, For low and high relative densities, two different results are shown in dynamic tests. Under the dense conditions, the maximum shear stress ratio($\tau$$\_$cyc//$\sigma$$\_$vo/) and the cyclic shear stress ratio($\tau$$\_$cyc//$\sigma$$\_$vo/) causing a certain shear strain increase with augmenting preshear ratio(${\alpha}$). However, the maximum shear stress ratio and the cyclic shear stress ratio increase or decrease with increasing preshear ratio under the loose conditions. Correction factor(K$\_$${\alpha}$/) for preshear increases at an early stage and then decreases with increasing preshear ratio at loose condition and increase with increasing preshear ratio at dense condition. Correction factor (K$\_$${\alpha}$,Max/) for preshear increases with the increasing preshear ratio irrespective of relative density, and the value of has same behavior as K$\_$${\alpha}$/.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.401-407
• /
• 2004

This study is on the constant-current stress corrosion test related to the load stress in welded zone and non-welded zone of high tensile strength steel for natural gas transmission. The surface corrosion pattern of the welded zone of API 5L-X65 specimens for natural gas transmission showed global corrosion and narrow pitting, and the pitting was increased by increasing the load stress. Initially, the average relative electrode potential and the average relative current of the high tensile strength steel for natural gas transmission specimens was decreased suddenly, and the average relative electrode potential was higher and the average relative current was lower in welded zone than base metal. and the average relative electrode potential was decreased by increasing the load stress, and the average relative current was somewhat increased by increasing the load stress. The corrosion rate was less in welded zone than base metal, and the corrosion rate was decreased by increasing the load stress.

• 동의생리병리학회지
• /
• 제16권1호
• /
• pp.52-54
• /
• 2002

We investigated the changes in oriental medical market based on supply and demand of market in Korea. It is shown that the supply of western medical doctors is 6.6 times as large as that of oriental medical doctors(醫師) in 1998. The supply of western medical doctors(韓醫師) showed the greater increasing rate than that of oriental medical doctors in 1975. However, the supply of western medical doctors was almost the same as that of oriental medical doctors in the increasing rate between 1985 and 1995. Similar trends was observed in the number of hospitals and clinics. From of viewpoint of demand, the use of oriental medicine was remarkably increasing from 1990 to 1997. Oriental medical institution showed a marked increase of 48.1 % in the total medical institution showed an increase of 21.6%. These results provided a strong evidence that oriental medicine had greater increasing rate than western medicine in the supply and demand of medical market and suggest that the use of oriental medicine may play a role in the specialization of oriental medicine.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권11호
• /
• pp.1713-1720
• /
• 2007

Influence of -110, +110, +220 and +330 mEq/kg of dry matter (DM) dietary cation-anion difference (DCAD) on growth performance of Thalli lambs were examined in a randomized complete block design. Four DCAD diets were randomly allotted to four groups, with ten lambs in each group. A linear increase in nutrient intake was recorded with increasing DCAD level. The digestibilities of nutrients were higher in lambs fed -110 DCAD diet than those fed +110, +220 and +330 DCAD diets. Lambs fed +330 DCAD diet had higher nitrogen balance than those fed -110 and +110 DCAD diets. Blood pH and serum $HCO_3$ increased with increasing DCAD level. Serum chloride was higher in lambs fed -110 DCAD diet, while serum (Na+K)-(Cl+S) increased linearly with increasing DCAD level. Serum calcium increased with decreasing DCAD level while serum magnesium and phosphorus remained unaffected. Lambs fed -110 DCAD diet had higher Ca balance than those fed +110, +220 and +330 DCAD diets. Urine pH increased with increasing DCAD level. Lambs fed +220 and +330 DCAD diets gained more weight than those fed -110 and +110 DCAD diets. In conclusion, increased DCAD level not only increased the dry matter intake but also improved the weight gain of growing Thalli lambs.

• Corrosion Science and Technology
• /
• 제18권6호
• /
• pp.312-317
• /
• 2019

The objective of this study was to investigate the corrosion behavior of aluminum (AA1100) in a mixed solution of 0 ~ 0.1 g/L Na₂S + 0.3 ~ 3 g/L NaCl + 0 ~ 10 mL/L H₂O₂. Potentiodynamic polarization tests were performed. Effects of solution compositions on corrosion potential, corrosion rate, and pitting potential of aluminum were statistically analyzed with a regression model. Results suggested that localized corrosion susceptibility of aluminum was increased in the solution with increasing concentration of NaCl because the pitting potential was lowered linearly with increasing NaCl concentration. On the contrary, H₂O₂ mitigated the galvanic corrosion of aluminum by increasing the corrosion potential. It also mitigated localized corrosion by increasing the pitting potential of aluminum. Na₂S did not exert a noticeable effect on the corrosion of aluminum. These effects of different chemical species at various concentrations were independent of each other. Synergy or offset effect was not observed.

• 한국지진공학회논문집
• /
• 제17권6호
• /
• pp.293-303
• /
• 2013

This paper deals with steel braced frame as increasing the lateral strength and ductility in order to seismic retrofit of existing buildings and discusses the designing criteria and calculation method of retrofitted buildings. The addition of steel braced frame can be effective for increasing the lateral strength and ductility of existing buildings. However, There is a problem in utilizing this method. It is the approach to provide an adequate connection between the existing RC frame and the installed steel braced frame, because global strength by failure mode(three type) depends on detail of connection and strength of existing RC frame. So, the designer must be confirmed if it satisfies the required performance or not. Failure mode of type I is the most appropriate for increasing the lateral strength and ductility. Seismic performance evaluation and strength calculation of seismic retrofit are performed by guideline by KISTEC(Korea Infrastructure Safety & Technology)'s "seismic performance evaluation and rehabilitation of existing buildings" and Japan Building Disaster Prevention Association. Buildings are modeled and non-linear pushover analysis are performed using MIDAS program.

• 한국전기전자재료학회논문지
• /
• 제28권7호
• /
• pp.456-461
• /
• 2015

In this study, the frequency properties of electrostatic capacity and dielectric loss for the samples with different types of filler has been measured in through the applied frequency range of 7 kHz ~3,000 kHz at temperature of $80^{\circ}C$, $110^{\circ}C$, $140^{\circ}C$, $170^{\circ}C$. The results of this study are as follows. When the sample is degradated at the temperature of $80^{\circ}C$, $110^{\circ}C$, $140^{\circ}C$, $170^{\circ}C$ and the frequency range of 7 kHz ~3,000 kHz is applied, It found that the electrostatic capacity of the sample with Polyimide film is larger than the sample with Grass fiber. It found that the dielectric loss for the sample with Polyimide film is larger than the sample with Grass fiber with increasing frequency and temperature in the $80^{\circ}C$, $110^{\circ}C$, $140^{\circ}C$, $170^{\circ}C$ range. Also, the dielectric loss decreased with increasing frequency. In case of the sample with Polyimide film, It found that the electrostatic capacity decreased with increasing temperature, and the dielectric loss gradually decreased with increasing frequency.

• 한국세라믹학회지
• /
• 제32권3호
• /
• pp.313-320
• /
• 1995

We investigated the preferred orientation, electrical and magnetic properties of the Mn-Zn ferrite thin films deposited on SiO2/Si(100) by ion beam sputtering. The Cu-added Mn-Zn ferrite thin films had a preferred orientation of (111) with a weak orientation, (311). While the Zn-added one had a strong (111) preferred orientation. The saturation magnetization of the Cu- or Zn-doped Mn-Zn ferrite films increased with increasing substrate temperature (Ts) due to the increase of grain size and the enhancement of crystallinity. For the same reason the coercivity of Cu- or Zn-doped Mn-Zn ferrite films deposited at low Ts increased with increasing Ts, but those of the films deposited at high Ts slightly decreased not only because the defect density of the films decreases but because more grains have multi-domains with increasing Ts. The resistivity of Cu- or Zn-added Mn-Zn ferrite thin fims measured by complex impedance method decreased with increasing Ts due to the ehhancement of crystallinity as well as due to the increase of grain size.