• 한국정밀공학회지
• /
• 제30권8호
• /
• pp.779-784
• /
• 2013

Increased efficiency and improved performance associated with light-weight materials were investigated in this study. Numerous studies have investigated surface treatments to improve the fatigue strength of metals. Laser heat treatment is a promising method because the power and spot size can be easily controlled, allowing a small heat affected zone (HAZ). However, changes in the material properties can result; in particular, the material can become more brittle. In this study, a combination of laser heat treatment and vibration peening was proposed to increase fatigue strength without changing the material characteristics. SCM440H was investigated experimentally, and specimens were tested using a giga-cycle ultrasonic fatigue tester. The results show that the combination of these two processes significantly increased the fatigue strength and, furthermore, different fracture types were observed after a small and large number of cycles.

• 대한인간공학회지
• /
• 제32권6호
• /
• pp.541-547
• /
• 2013

Objective: The aim of this study is to find the influence on muscle fatigue by changing an angle of neck while Shaker exercise. Background: Shaker exercise is commonly applied to dysphagia patients for strengthen suprahyoid muscle(SHM) and relaxing upper esophageal sphincter. Method: Experiments were conducted by measuring muscle fatigue with surface electromyography(SEMG) in case of neck $15^{\circ}$ and $50^{\circ}$ flexion, in addition to original method. For the study 30 undergraduate students were participated as subjects. Muscle fatigue was measured with variations of median frequency(MF) and median frequency slope(MFS) by attaching SEMG to 3 muscles. At the same time, perceived exertion was measured by using Borg's rating of perceived exertion(RPE). Results: A MF was increased when low angle in SHM, both male and female. It means that muscle fatigue was significantly decreased(p<.05). RPE was significantly increased when low angle(p<.01). Perceived exertion explained 15.2% of the variation of MF in SHM. And regression equation was, MF in SHM = 59.918 + (4,910 * RPE). Conclusion: The outcome shows that it is possible to use the efficient method which makes muscle fatigue decrease by reducing the angle of neck flexion. Application: The results might contribute to develop the effective Shaker exercise method.

• 대한안전경영과학회지
• /
• 제14권4호
• /
• pp.51-58
• /
• 2012

This study attempted to evaluate the direct and indirect effect of emotional labor, job and psychosocial stress, and fatigue of beauty industry workers on their musculoskeletal diseases. The findings of this study showed that, among the workers with perceived symptoms of musculoskeletal diseases, the body part with the most commonly occurring symptom was the shoulder, followed by neck, low back, wrist, arm, foot and knee. As for the effect of work-related psychological factors on musculoskeletal diseases, it was found that the workers with musculoskeletal diseases were more affected by emotional labor and fatigue than non-symptom workers. It was also shown that when their job stress increased, the fatigue level also increased, though their psychosocial stress decreased. In addition, it was found that both direct and indirect effects of emotional labor on fatigue were high, and the indirect effect of job stress through fatigue on musculoskeletal diseases was significant.

• 한국치위생학회지
• /
• 제8권1호
• /
• pp.73-91
• /
• 2008

In order to investigate the complaint rates of subjective fatigue symptoms and the degree of job-satisfaction among dental hygienists based on their socio-demographic and job characteristics and to find out the factors related with subjective fatigue symptoms and job satisfaction. The study subjects were recruited from 274 dental hygienists who worked at dental hospitals and clinics in Daejon city and South Chungcheong Province during the period between Jan. 5 and Feb. 11, 2008. They were asked to complete the self-administered questionnaires asking about their socio-demographic characteristics. job characteristics. daily life styles, job satisfaction and subjective fatigue symptoms, and the major finding of the results were as follows : 1. The mean scores of job satisfaction were 3.12V0.47 of the total full scores(5.00). and the highest scores were in the sub-domain of interpersonal relationship. and the lowest scores were pay. The scores of job satisfaction by socio-demographic characteristics and daily life styles were not significantly differences, but in job characteristics, significantly increased with those feeling satisfied with their job. those with appropriate amount of duty amount, those free of jop autonomy, those feeling satisfied with their monthly income. satisfactory personal relations at work. 2. The mean scores of subjective fatigue symptoms were 27.6V10.9 of the total full scores(60.0), and the highest scores were in the sub-group of bodily projection of fatigue(Group III), and they were followed by difficulty in concentration(Group II). dullness and sleepness(Group I) in their decreasing order of magnitude. The scores of job satisfaction by socio-demographic characteristics and daily life styles were significantly increased with the group of lower age, the group of irregularly breakfast habit and the worse subjective health status. Based on job characteristics. the score of subjective fatigue symptoms were significantly increased with those group of lower clinical career and monthly income, those feeling unsatisfied with their job, those with inappropriate amount of duty amount. those satisfactory personal relations at work 3. The correlation of subjective fatigue symptoms with job satisfaction showed a negative correlation with rM-0.198(pM0.000), and job satisfaction were higher according to the lower subjective fatigue symptoms. The correlation among the scores of sub-domain of job satisfaction and the sub-group of subjective fatigue symptoms were significantly positive correlation. 4. The affecting factors of significance on job satisfaction included clinical career, duty amount salary satisfaction, with the explanatory power of 32.9%. Those on subjective fatigue symptoms included the eucation and the subjective health statuts, with the explanatory power of 20.8%. When considering these results, the job-satisfaction and the subjective fatigue symptoms were significantly correlated with the job related factors than factors of socio-demographic characteristics and daily life styles. In addition. if job environments of dental hygienist can improved. their job-satisfaction and subjective fatigue symptoms are suggested to be betters.

• 한국도로학회논문집
• /
• 제5권3호
• /
• pp.11-20
• /
• 2003

교량, 도로, 공항 및 해양구조물 등은 반복하중을 받게 되는 대표적 토목구조물이다. 특히 공항이나 도로포장체는 휨에 의한 인장에 의해 파괴되기 때문에 사용재료의 특성에 기초한 피로수명의 고찰은 매우 중요하다. 따라서, 이 논문에서는 포장 콘크리트의 피로수명을 주요 실험변수에 따라 실험하고 실험방법에 따라 비교 분석하고자 하였다. 피로실험은 쪼갬인장 피로실험 ($\phi150mm{\times}75mm$)과 휨인장 피로실험 ($150mm{\times}150mm{\times}550mm$) 방법을 적용하여 하중재하 속도(1, 5, 10, 20Hz), 하중재하 형상(사각파, 정현파, 삼각파). 시험체의 습윤조건(건조상태 습윤상태) 및 양생기간(28일, 56일)을 주요 실험변수로 하여 수행하였다. 실험결과 하중재하 속도가 느릴수록 피로수명은 현저히 감소하는 것으로 나타났으며, 하중재하 속도가 빠를수록 피로수명은 증가하는 것으로 나타났다. 하중재하 형상에 따라서는 정현파를 기준하여 사각파에서는 피로수명의 급격한 감소를 나타냈으며 삼각파에서는 피로수명이 증가하는 것으로 나타났다 또한, 시험체의 습윤조건에 따라서는 건조상태에 비하여 습윤상태에서는 피로수명이 감소하였으며, 양생기간에 따라서는 재령 28일에서 56일로 증가함에 따라 피로수명이 증가함을 나타내었다.

• 대한기계학회논문집
• /
• 제7권4호
• /
• pp.355-360
• /
• 1983

This paper deals with fatigue behavior of ion-nitrided coil spring. It is found that fatigue limit can be significantly increased by ion-nitriding. Ion-nitribed specimen which is treated at 550.deg. C for 5 hours improves in the fatigue limit by 30 percent in comparison with that of non-nitrided specimen. On the other hand, the value of spring constant K has nothing to do with nitriding time and temperature in this experimental range. Besides fatigue behavior, the following effects are discussed such as compound layer, diffusion layer, hardness distribution and their relations.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.558-567
• /
• 2003

The catenary wires are damaged by periodic running of train as well as repeated stress. The wires are also degraded by atmosphere corrosion at fields. Corrosion of wires increased surface roughness and deteriorated mechanical properties by providing fatigue crack initiation sited resulting in a bad effect on service life of the wires. Fatigue test of catenary wires performed to estimate service lifetime. Also, simulation to analyze stress on catenary wires was conducted through modelling the finite elements for dynamic behaviors of wires. Fatigue life of catenary wires was estimated with fatigue and simulation tests.

• 한국공작기계학회논문집
• /
• 제14권3호
• /
• pp.74-80
• /
• 2005

Steel plates used for common structures are manufactured by rolling processes in general. The rolling direction traces generated during the processes have significant influences on mechanical properties and fatigue behavior of the plates. The objective of present study is to investigate those directional characteristics for the enhancement of steel structure safety. SS400 steel plates of 3 mm thickness are tested in this study, When the angles between the tensile loading direction and the rolling direction of the plates are increased, their yield strengths are increased and elongations are rather decreased. It is also shown that fatigue crack growth rates in the plates can be increased according to the changes of those mechanical characteristics. For the safety of the structures, therefore, it is critical to decrease the angles between the rolling direction and the tensile loading direction.

• 대한안전경영과학회지
• /
• 제10권2호
• /
• pp.15-24
• /
• 2008

This study was to investigate the relationship of VDT(visual display terminal) work condition and fatigue severity in the financial office workers. Questionnaires were completed by 662 persons in VDT workers of Post Office from January to May 2006. Multidimensional Fatigue Scale(MFS) that was developed in Korea Occupational Safety &Health Agency to estimate the degree of fatigue was used for study. In results, 149 persons(22.5%) in VDT workers were felt low fatigue severity, 351 workers(53.0%) were middle, and 162 workers (24.5%) were high. So it was appeared that one in four VDT workers felt the high fatigue severity. And woman VDT workers felt more fatigue severity than man. Also, fatigue severity was increased with increasing work time. Our findings suggest that VDT workers in financial office need proper health program to prevent occupational fatigue and disease.

• Journal of Welding and Joining
• /
• 제32권4호
• /
• pp.34-38
• /
• 2014

Carburizing treatments are the important way to developing fatigue strength and wear resistance. It is well known that the case depth is one of the most significant parameters determining fatigue strength. In this study, 3-point bending fatigue test was conducted to evaluate fatigue strength for the carburized depth with 18CrNiMo7-6 steel. As a result, fatigue strength increased with effective case depth decreased. It is shown that hardness in case hardened layer played principal role in the fatigue strength.