• 한국항공운항학회지
• /
• 제14권4호
• /
• pp.1-10
• /
• 2006

A computational study was carried out in order to investigate the ground effect of a circular cylinder in the presence of a moving wall at a Reynolds number of 2.0${\times}$104. The viscous-incompressible Navier-Stokes equations and Spalart-Allmaras turbulent model of the commercial CFD code were adopted for this numerical analysis. The moving wall was set parallel with the freestream, and the speed of motion was equal to the freestream velocity. The gap ratio is defined as the distance ratio between the circular cylinder diameter and the height from the moving wall. The numerical results show that there are the differences among the each of the stages in evidence of the vorticity contours and the polar diagrams of $C_l$ vs. $C_d$. The 4 stages of the gap ratio are defined according to the flow features, whose stages are divided into small, intermediate, large and convergence gap ratios, respectively.

• Nuclear Engineering and Technology
• /
• 제16권1호
• /
• pp.21-28
• /
• 1984

수치확산을 포함한 truncation오차의 줄임은 수치해석의 중요한 과제가 되어왔다. Stream line방법이 교차수치 확산과 비확산형의 truncation 오차를 제거하기 위하여 고안되었다. 또한, stream line방법과 유한 차분법이 합쳐진 2단계 stream line방법이 비압축성 난류유동의 지배 방정식을 풀기 위하여 고안되었다. 이 방법은 유한 차분법과 비교되었으며, 두 방법 모두 실험자료와 비교되었다. 그리고, 두 방법의 truncation 오차를 비교하기 위하여 truncation 오차 분석이 행해졌다

• International Journal of Air-Conditioning and Refrigeration
• /
• 제17권2호
• /
• pp.52-60
• /
• 2009

The purpose of this research is to develop high efficiency plastic plate heat exchangers which can be substituted for conventional aluminum plate heat exchangers. Four simulation models of plastic plate heat exchangers are designed and simulated: that is, flat plate type, turbulent promoter type, corrugate type and dimple type heat exchanger. The flat plate type is designed as the reference model in order to evaluate how much thermal performance increases. The turbulent promoter type is fabricated with cylindrical-type vortex generators and rib-type turbulent promoters. The corrugate type is obtained from the conventional stainless steel compact heat exchangers, which are called the herringbone-type compact heat exchangers. The dimple type has a number of dimples on its surface. In this study, the flow and heat transfer characteristics of the plastic plate heat exchanger are investigated using numerical simulation and compared with experimental results. Numerical simulation is carried out using the FLUENT code. The flows are assumed as a three-dimensional, incompressible and turbulent model. The computational analysis and experimental results both show that the friction coefficient and Nu number is highest in the corrugate type. The tendency of numerical simulation results is in good agreement with that of the experimental results.

• International Journal of Ocean System Engineering
• /
• 제3권2호
• /
• pp.68-76
• /
• 2013

In this study, a 3D numerical model was used to predict nonlinear wave forces on a cylindrical pile installed in a shallow water region. The model was based on solving the viscous and incompressible Navier-Stokes equations for a two-phase flow (water and air) model and the volume of fluid method for treating the free surface of water. A new application was developed based on the cut-cell method to allow easy installation of complicated obstacles (e.g., bottom geometry and cylindrical pile) in a computational domain. Free-surface elevation, water particle velocities, and inline wave forces were calculated, and the results show good agreement with experimental data obtained by the Danish Hydraulic Institute. The simulation results revealed that the proposed model can, without the use of empirical formulas (i.e., Morison equation) and additional wave analysis models, reliably predict non-linear wave forces on an offshore wind turbine foundation installed in a shallow water region.

• 토지주택연구
• /
• 제2권4호
• /
• pp.463-469
• /
• 2011

LH has installed sashes to the balcony to save energy and increase residential space. Then, it is very difficult to protect a condensation of vapor on the walls in the winter time, because the space is closed and the wall surface temperature becomes very low in a balcony. We have tried to get the optimal thermal design methods to reduce the condensation on the walls. The one of the chosen method is to make holes on the walls, and then the condensation shall be reduce because the dew point temperature will be lower due to the effect of dehumidify. In this case, it is just necessary to find as like that how many holes should be perforated through the wall, what's their size, and where is their positions. In this study, a computational fluid dynamics was applied to analyze the temperature, the pressure and the velocity distribution for an incompressible flow in the balcony spaces. And field tests were also carried out to get the data to compare to the simulation results. Finally the design criteria of the ventilation holes in the balconies was suggested by analysis of the computer simulation models.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.11-19
• /
• 2020

In recent years, oil prices have continued to be low owing to the development of unconventional resources such as shale gas, coalbed methane gas, and tight gas. However, shipping companies are still experiencing difficulties because of recession in the shipping market. Hence, they devote considerable effort toward reducing operating costs. One of the important parameters for reducing operating costs is the frictional resistance of vessels. Generally, a vessel is covered with paint for smoothing its surface. However, frictional resistance increases with time owing to surface roughness, such as that caused by fouling. To prevent this, shipping companies periodically clean or repaint the surfaces of vessels using analyzed operating data. In addition, studies using various methods have been continuously carried out to identify this phenomenon such as fouling for managing ships more efficiently. In this study, numerical simulation was used to analyze the change in the resistance performance of a ship owing to an increase in surface roughness using commercial software, i.e., Star-CCM+, which solves the continuity and Navier eStokes equations for incompressible and viscous flow. The conditions for numerical simulation were verified through comparison with experiments, and these conditions were applied to three ships to evaluate resistance performance according to surface roughness.

• Advances in aircraft and spacecraft science
• /
• 제10권5호
• /
• pp.419-437
• /
• 2023

This paper presents the study of the effects of rigid-body motion simultaneously with the presence of the effects of temporal variation due to the existence of morphing speed on the aeroelastic stability of the two-stage telescopic wings, and hence this is the main novelty of this study. To this aim, Euler-Bernoulli beam theory is used to model the bending-torsional dynamics of the wing. The aerodynamic loads on the wing in an incompressible flow regime are determined by using Peters' unsteady aerodynamic model. The governing aeroelastic equations are discretized employing a finite element method based on the beam-rod model. The effects of rigid-body motion on the length-based stability of the wing are determined by checking the eigenvalues of system. The obtained results are compared with those available in the literature, and a good agreement is observed. Furthermore, the effects of different parameters of rigid-body such as the mass, radius of gyration, fuselage center of gravity distance from wing elastic axis on the aeroelastic stability are discussed. It is found that some parameters can cause unpredictable changes in the critical length and frequency. Also, paying attention to the fuselage parameters and how they affect stability is very important and will play a significant role in the design.

• 한국산학기술학회논문지
• /
• 제16권11호
• /
• pp.7990-8000
• /
• 2015

식물공장은 환경적 조건을 조절하여 계절이나 장소에 관계없이 농산물을 일정하게 생산하는 식물재배 시스템이다. 식물공장에 있어서 내부의 열 유동은 식물공장의 중요한 변수이다. 본 논문에서는 다층 재배선반을 갖는 하이브리드 식물공장 내의 열유동 특성을 수치 시뮬레이션을 통해 연구하였다. 열 유동 특성의 수치해를 얻기 위해 유한체적법(Finite Volume Method)을 이용하였다. 수치해석 모델에 있어서는 저 레이놀드수(low Reynolds number) ${\kappa}-{\epsilon}$ 난류모델을 이용하였으며, 해석방법으로는 비압축성 점성유동 영역과 압력경계 조건을 사용하였다. 수치해석에 있어, 3종류의 유입 공기속도와 재배선반의 위치변화에 따른 식물공장 내의 열유동 특성을 상용 프로그램인 Solid Works Flow simulation을 사용하였다. 수치해석을 통한 결론은 다음과 같다. 첫째, 송풍기를 통한 식물공장 내의 유입 공기속도를 1.6 m/s로 하였을 때, Case 3의 재배선반 배치가 비교적 균일한 온도 분포를 나타내었고, LED광만을 사용한 Case 1의 배치는 시험베드(test bed) TB2와 TB3 영역의 낮은 온도분포로 인하여 서큘레이터 등을 통한 추가적인 온도 제어가 필요할 것으로 판단되었다. 둘째, 식물재배 LED 인공광(DYLED47)의 청색광과 적색광의 비율을 1:1로 100% 구동 시, 재배선반의 평균 온도가 약 $3^{\circ}C$ 증가하였다. 본 논문은 한국산학기술학회 논문지 심사용 투고요령입니다.

• 한국가스학회지
• /
• 제10권3호
• /
• pp.7-12
• /
• 2006

본 논문은 배관에 대한 유동해석과 구조해석을 연계하여 감육부 최심점에서의 국부응력변화를 평가하기 위한 새로운 방법을 제시하였다. 이를 위해 배관 크기, 감육깊이 및 길이 등 3가지 변수를 고려한 해석모델을 적용하고, 침부식 또는 유동가속부식에 취약한 배관계통에서의 2가지 대표적 유체유동을 적용시켜 배관에 미치는 영향을 분석하였다. 또한 유체의 흐름은 정상상태 비압축성 유동으로 가정하였고, 그 결과값을 감육배관 최심점에서의 국부응력을 구하기 위해 수행한 유한요소해석의 초기조건으로 적용하였다. 이러한 방법으로 구한 감육부에서의 압력분포와 기존의 단순 내압만을 고려한 경우와 상이하며, 그 결과를 비교하여 나타내었다. 향후 본 논문은 발전소설비나 가스설비의 배관건전성 평가에 참고자료로 적용 가능할 것으로 사료된다.

• 대한기계학회논문집B
• /
• 제38권9호
• /
• pp.789-795
• /
• 2014

본 연구에서는 개방형 축열시스템에 설치되는 다양한 형상을 가진 디퓨저의 유량 분배 특성을 수치해석 하였다. 작동유체가 분기배관의 양 방향으로 나뉘어져 있는 구멍들을 통하여 균등하게 분배되도록 4가지 형상의 디퓨저를 설계하였다. 상용 해석 프로그램인 ANSYS-FLUENT을 사용하여 비압축성 유체의 3차원 정상 층류 유동으로 시뮬레이션을 수행하였다. 한 방향 또는 양 방향으로 분배되는 디퓨저는 유량이 일정하게 분배되지 않는 반면에 양 방향 헤더 형식과 H형 대칭구조의 디퓨저는 균등한 분배 특성을 보였다. 한편, H형 대칭구조의 디퓨저는 양 방향 헤더 형식 디퓨저보다 높은 펌프 양정을 필요로 하므로 유량분배도 일정하고 펌프 양정도 낮은 양 방향 헤더 형식 디퓨저가 최적임을 확인하였다.