• 제목/요약/키워드: Incinerators

검색결과 129건 처리시간 0.031초

공단지역 대기 중 PCBs의 오염농도 및 발생원 추정 (Source Estimation and Concentration Levels of PCBs in Ambient Air of an Industrial Area)

  • 김경수;송병주;박석운;김종국
    • 대한환경공학회지
    • /
    • 제27권4호
    • /
    • pp.385-389
    • /
    • 2005
  • 공단지역 대기 중 PCBs의 오염 수준을 조사하기 위하여 시화 및 반월 공단 지역에서 PCBs를 측정하였다. 총 농도 및 WHO-TEQ 농도는 각각 $2,080{\sim}5,820$ (중앙값 2,760) $pg/m^3$$0.19{\sim}1.01$ (중앙값 0,42) $pgTEQ/m^3$으로 검출되었다. 동족체 조성에 있어서는, 고염소화 동족체(6염화물에서 10염화물까지)의 존재 비율이 다른 지역의 일반 대기시료에 비하여 높았다. 측정된 대기 시료를 PCBs의 발생원으로 알려진 소각로 배가스 및 Aroclor시료와의 연관성을 조사하기 위하여 군집분석을 행하였다. 각 동족체 중 각각의 이성질체의 비율을 입력변수로서 이용하였다. 그 결과, 공단지역 대기 시료는 발생원으로 입력한 시료들과는 거리가 먼 하나의 그룹으로 형성되었다. 이것은 시화와 반월 공단 지역의 대기 시료는 지금까지 알려진 소각로 배가스나 Aroclor의 영향보다는 지역적인 특정 발생원의 영향을 받고 있음을 시사한다. 이러한 결과는 이성질체의 패턴 비교를 통해서도 알 수 있었다. 따라서, 이 지역의 PCBs 발생원을 밝히기 위해서는 추가적인 모니터링 조사가 필요할 것으로 사료된다.

생활폐기물 특성 분석 및 소각시설의 CO2 배출량 평가 (Property Analysis of Municipal Solid Waste and Estimation of CO2 Emissions from Waste Incinerators)

  • 김병순;김신도;김창환;이태정
    • 한국대기환경학회지
    • /
    • 제26권6호
    • /
    • pp.657-665
    • /
    • 2010
  • Carbon dioxide ($CO_2$) is known to be a major greenhouse gas partially emitted from waste combustion facilities. According to the greenhouse gas emission inventory in Korea, the quantity of the gas emitted from waste sector in 2005 represents approximately 2.5 percent of all domestic greenhouse gas emission. Currently, the emission rate of greenhouse gas from the waste sector is relatively constant partly because of both the reduced waste disposal in landfills and the increased amounts of waste materials for recycling. However, the greenhouse gas emission rate in waste sectors is anticipated to continually increase, mainly due to increased incineration of solid waste. The objective of this study was to analyze the property of Municipal Solid Waste (MSW) and estimate $CO_2$ emissions from domestic MSW incineration facilities. The $CO_2$ emission rates obtained from the facilities were surveyed, along with other two methods, including Tier 2a based on 2006 IPCC Guideline default emission factor and Tier 3 based on facility specific value. The $CO_2$ emission rates were calculated by using $CO_2$ concentrations and gas flows measured from the stacks. Other parameters such as waste composition, dry matter content, carbon content, oxidation coefficient of waste were included for the calculation. The $CO_2$ average emission rate by the Tier 2a was 34,545 ton/y, while Tier 3 was 31,066 ton/y. Based on this study, we conclude that Tier 2a was overestimated by 11.2 percent for the $CO_2$ emission observed by Tier 3. Further study is still needed to determine accurate $CO_2$ emission rates from municipal solid waste incineration facilities and other various combustion facilities by obtaining country-specific emission factor, rather than relying on IPCC default emission factor.

이성체 정보를 이용한 토양 중 다이옥신 오염원 해석 (Source Estimation of Dioxin in Soil Using a Congener Pattern)

  • 김종국;김경수;김재식;신선경;정영희;정일록
    • 대한환경공학회지
    • /
    • 제27권3호
    • /
    • pp.316-322
    • /
    • 2005
  • 폐기물 소각시설 주변토양 중 다이옥신 농도를 분석하여 소각시설로부터 거리와 방향에 따른 농도변화를 고찰하고, 시료에 대한 군집분석을 수행하여 발생원이 수용체에 미치는 영향에 대해 검토 하였다. 토양 중 다이옥신 총 농도 및 I-TEQ 농도는 각각 $31.065{\sim}7,257.499\;pg/g\;d.w.$$0.099{\sim}35.191\;pg\;I-TEQ/g\;d.w.$로 나타났다. 조사대상 소각시설 이외의 주변에 소형 소각시설들이 산재해 있어 토양 중 다이옥신 농도와 풍향 및 거리와의 상관성은 약한 것으로 나타났다. 반면 소각시설 배출가스의 영향을 파악하기 위하여 PCDFs와 PCDDs의 비율을 조사한 결과, 소각시설에서 멀어질수록 배출가스에서 높은 비율로 검출되는 PCDFs의 비율이 감소하는 경향을 보였다. 조사대상 소각시설이 주변 토양 중 다이옥신 농도에 미치는 영향권은 500 m 이내인 것으로 판단되었고 먼거리에서 고농도가 검출된 것은 주변에 존재하고 있는 소형 소각시설이나 농약(PCP) 등 다른 오염원에 의한 복합적인 영향을 동시에 받고 있는 것으로 사료되었다. 다이옥신 발생원과 수용체인 토양의 이성체 패턴을 이용한 군집분석 결과, 4개의 그룹으로 나눌 수 있었으며, 각 그룹의 이성체 패턴 비교를 통해 소각시설 배출가스와 농약 등의 발생원이 수용체에 미치는 영향정도에 대해 정성적인 추정이 가능하게 되어 군집 분석이 통계적 수법의 하나로 이용될 수 있을 것으로 사료되었다.

생활쓰레기 유동상(流動床) 소각로(燒却爐) 불연물(不燃物)의 재활용에 관한 연구(硏究) (Study on Recycling of Incombustion Materials from MSWI Fluidized Bed Incinerator Ash)

  • 최우진;박은규;강승균
    • 자원리싸이클링
    • /
    • 제17권4호
    • /
    • pp.3-9
    • /
    • 2008
  • 국내의 경우 2006년 유동상 소각로에서 발생한 소각재는 약 13,952톤에 달하고 있으며, 대부분 자력선별 후 매립처리 되고 있는 실정이다. 본 연구에서는 유동상 소각로에서 발생한 불연물로부터 분리 회수한 무기물 시료와 점토를 일정비율로 배합하여 소결체를 제작하였으며, 물성평가를 통하여 세라믹스(요업)원료로서의 재활용 가능성을 검토하였다. 체가름 및 자력선별 후 회수된 불연물 시료에 대한 중금속 함량 분석결과 Pb 등 일부 중금속의 농도는 여전히 높게 나타났으나 $Cr^{6+}$의 경우는 0.4ppm이하로 낮게 나타났으며, 용출실험결과는 모두 KSLP 기준치 이하로 조사되었다. 최종 회수한 불연물 시료의 XRF 분석결과 금속산화물이 선별공정에서 효율적으로 제거된 것으로 조사되었다. 회수된 불연물 시료를 점토와 일정비율로 배합하여 제조된 소결체의 물성조사 결과 $1,000^{\circ}C$$1,050^{\circ}C$에서 소성한 제품의 경우 불연물을 첨가하면 융제로서의 역할이 가능하여 소성온도를 약 $50^{\circ}C$정도 낮출 수 있다. 또한, 불연물의 첨가량이 증가할수록 소성수축률 및 흡수율이 낮아져서 소결체의 압축강도가 개선되었다.

열정산방법을 이용한 사업장폐기물 소각시설의 저위발열량 분석·평가 연구 (A study on the evaluation of lower heating value using heat balance method in industrial waste incineration facilities)

  • 고영재;강준구;권영현;유하녕;권준화;장미정;전태완;신선경
    • 분석과학
    • /
    • 제31권1호
    • /
    • pp.31-38
    • /
    • 2018
  • 기존 폐기물 저위발열량 측정 분석 방법은 소량의 시료에 대한 발열량계 측정 및 원소분석 결과로 저위발열량 환산식을 적용하여 산정하도록 규정하고 있다. 즉, 기존 저위발열량 산정방법은 폐기물의 불균질성, 지역적 특성, 계절적 특성 등을 충분히 반영하지 못하여 대표성과 객관성 측면에서의 한계를 나타내고 있다. 이러한 문제로 환경부 고시(제2015-251호)에서는 저위발열량의 대표성 확보를 위하여 산정방법을 개정하였으며, "KS B 6205 육상용 보일러의 열정산방식"을 바탕으로 열정산방법을 적용한 사업장폐기물 소각시설에서의 저위발열량 산정방법을 제시하고 있다. 본 연구에서는 현재 운영 중인 사업장폐기물 소각시설을 대상으로 열정산법에 따라 시설별 투입 폐기물의 저위발열량을 분석 평가하였다. 사업장폐기물 소각시설 7 개소 (10 개호기)에 대한 저위발열량 평가 결과 평균 약 3,404.7 kcal/kg로 산정되었으며, 세부 산정 인자에는 실제 시설 운영 데이터를 수집 종합 하여 적용하였다. 본 연구에서 적용한 개정된 저위발열량 산정 방법은 불균질한 성상의 폐기물 특성을 반영할 수 있는 방법으로, 기존 폐기물 발열량 산정방법과 비교하여 보다 객관성을 확보한 방법인 것으로 판단된다. 본 연구의 결과는 추후 세부적인 저위발열량 산정방법 개선 및 산정인자 도출 등을 위한 기초자료로 활용 될 수 있을 것으로 판단된다.

서울시 일반폐기물의 통합적 관리체계에 관한 연구 (A Study on the Integrated Management System of Municipal Solid Waste from Seoul Metropolitan City)

  • 우세홍;홍상균
    • 한국환경보건학회지
    • /
    • 제19권4호
    • /
    • pp.51-58
    • /
    • 1993
  • The integrated solid waste management for Seoul Metropolitan city can be established on the basis of the following hierarchy of priorities: 1. Efforts for source reduction should be propelled by both government and citizens to achieve the effects of resource conservation. The adequate production and consumption which are environmentally amenable and sustainable can be induced by the reasonable imposition of deposit money for waste treatment to one-time use products. To accomplish source reduction effectively, the induction of legal and institutional regulation of producer and consumer participation is requisite. 2. For resource recovery, wastes generated should be recycled as far as practicable. Community residents are responsible to separate discharge, the authorities concerned have responsibility of separate collection, and recycling industry should be assissted through tax reduction and financing. Resource separation facilities can be constructed at Kimpo Metropolitan landfill site for wastes not separately collected due to some unavoidable circumstances. 3. Garbage should be composted. Garbage is uneconomical for incineration, because it has high moisture content and low calorie, thus there is no reason for the incineration of garbage even though garbage is classified into combustibles. Composting facilities can be located at sites which are not densely populated and easily accessible to transportation, for example, Kimpo Metropolitan landfill site. Compost produced can be managed by the authorities for the use of fertilizer to a green tract of suburban land and farms. 4. Nonhazardous combustible wastes not recyclable can be utilized for thermal recovery at the incinerators which are completely equipped with pollution control devices. According to the trend of local autonomy and the equity principle of local autonomous entities, incineration facilities of minimal capacity required can be constructed at each districts of Seoul Metropolitan city which have organized local assembly. In case of Yangcheon district, the economically combustible waste quantity is about 260 tons/day which exceeds 150 tons/day, the incineration capacity of existing facility. But, from now on, waste quantity can be reduced substantially by the intensive efforts of citizens for source reduction and recycling and the institutional support of administrative organizations. Especially, it is indispensable for the government to constitute institutional and technological bases that can recycle paper and plastics form 43% of waste generated. A good time for constructing of incineration facilities for municipal solid waste can be postponed to the time that pollution control technologies of domestic enterprises are fully developed to satisfy the standards of air pollution prevention, because the life expectancy of Kimpo Metropolitan landfill site is about 25 years. Within this period, institutional improvements and technological advancements can be attained, while the air qual. ity of Seoul Metropolitan city can be ameliorated to the level to afford incineration facilities. 5. For final disposal, incombustibles and ash are landfilled sanitarily at Kimpo Metropolitan landfill site.

  • PDF

벤튜리관 형상에 따른 배기가스 재순환 유동 특성에 관한 연구 (A Study on the Flow Characteristics of the Flue Gas Recirculation with the Change of Venturi Tube Shape)

  • 하지수;심성훈;김대연
    • 한국가스학회지
    • /
    • 제23권1호
    • /
    • pp.12-18
    • /
    • 2019
  • 자동차 엔진이나 소각로 등의 연소기기에서 질소산화물을 저감하기 위한 여러 가지 방법 중에 배기가스 재순환 방법이 널리 쓰이고 있다. 본 연구에서는 고온의 배기가스를 재순환 유입하기 위해 벤튜리 튜브를 사용할 경우에 상온의 공기 노즐 출구 위치를 변화하여 고온의 배기가스를 재순환 유입하는 최적 위치를 도출하기 위해 전산 열유체해석을 통해 살펴보았다. 또한 상온의 공기 노즐 출구에 원뿔을 설치한 경우에 대한 배기가스 재순환 유입량 특성을 고찰하였다. 공기 노즐 출구 위치를 배기가스 재순환 유입 출구의 시작위치(z=0)에서 끝 위치(z=0.6m)로 변화하였을 때 유선과 온도 분포 변화를 관찰하였으며 배기가스 재순환 유입량비와 혼합가스 출구의 평균온도로 정량적으로 비교하였다. 본 연구를 통하여 상온의 공기 노즐 출구 위치는 z=0.15m(1/4L)에서 재순환 유입량과 출구에서의 평균온도가 가장 최대가 되는 것을 알 수 있었다. 또한 공기 노즐 출구에 원뿔을 설치하면 공기 노즐 출구의 속도가 증가하여 배기가스 재순환 유입량이 약 2배 증가하고 혼합가스 출구 온도도 $116^{\circ}C$ 증가하는 것을 알 수 있었다.

산업용제조시설과 폐기물처리시설에서 발생된 나노폐기물의 물리화학적 특성 및 안전관리방안 제시 (Suggestion of Physicochemical Characteristics and Safety Management in the Waste Containing Nanomaterials from Engineered Nano-materials Manufacturing Plants and Waste Treatment Facilities)

  • 김우일;연진모;조나현;김용준;엄남일;김기헌;이영기
    • 한국폐기물자원순환학회지
    • /
    • 제35권7호
    • /
    • pp.670-682
    • /
    • 2018
  • Engineered nanomaterials (ENMs) can be released to humans and the environment through the generation of waste containing engineered nanomaterials (WCNMs) and the use and disposal of nano-products. Nanoparticles can also be introduced intentionally or unintentionally into waste streams. This study examined WCNMs in domestic industries, and target nanomaterials, such as silicon dioxide, titanium oxide, zinc oxide, nano silver, and carbon nanotubes (CNTs), were selected. We tested 48 samples, such as dust, sludge, ash, and by-products from manufacturing facilities and waste treatment facilities. We analyzed leaching and content concentrations for heavy metals and hazardous constituents of the waste. Chemical compositions were also measured by XRD and XRF, and the unique properties of nano-waste were identified by using a particle size distribution analyzer and TEM. The dust and sludge generated from manufacturing facilities and the use of nanomaterials showed higher concentrations of metals such as lead, arsenic, chromium, barium, and zinc. Oiled cloths from facilities using nano silver revealed high concentrations of copper, and the leaching concentrations of copper and lead in fly ash were higher than those in bottom ash. In XRF measurements at the facilities, we detected compounds such as silicon dioxide, sulfur trioxide, calcium oxide, titanium dioxide, and zinc oxide. We found several chemicals such as calcium oxide and silicon dioxide in the bottom ash of waste incinerators.

한국 환경오염 취약지역 주민 건강영향조사 문헌고찰(1997~2021) (Literature Review on Health Effect Surveys of Residents in Environmentally Contaminated Areas in South Korea from 1997 to 2021)

  • 최경화;김수정;장현아;한다희;권호장;조용민
    • 한국환경보건학회지
    • /
    • 제49권3호
    • /
    • pp.134-148
    • /
    • 2023
  • Background: The conducting of health effect surveys (HESs) in environmentally contaminated vulnerable areas (ECVAs) by the central and local governments has been increasing apace with the increase in demand for HESs since the Environmental Health Act was enacted in South Korea in 2008. Objectives: This study aimed to review the HESs of residents in ECVAs conducted in South Korea. Methods: An analysis was performed on 125 reports obtained from the Environment Digital Library, PRISM, and local government websites after selecting from 803 projects obtained as ECVAs from the Korea ON-Line E-Procurement System (1997~2021), National Institute Environment Research (2000~2021), and Korea Environmental Industry and Technology Institute (2009~2021). The reports were classified by background (residents' demand, HES, and more), research design (cross-sectional study, cohort, ecological study, and panel), pollution source (abandoned metal mine (AMM), industrial complex (IC), and more), and assessment method of exposure and health effects. The survey area was converted into administrative district codes for geographical mapping. Results: There were 37, 34, 18, and 10 cases associated with AMM, IC, waste incinerators, and coal-fired power plants, respectively. Most of the studies conducted were cross-sectional studies and ecological studies. The proportion of epidemiological investigations by residents' demand showed an increase from 0.0% to 8.9% for the central government while decreasing from 16.7% to 14.3% for local governments after 2008 compared to before 2008. HESs increased at both the central and local government levels since 2014. For the evaluation method, 365 environmental hazards, 319 health outcomes, and 302 biological markers were investigated, with the most commonly investigated items being metals, cancer, and blood metals. Conclusions: HESs of residents in ECVAs in South Korea have been continuously developed both quantitatively and qualitatively. Future improvements are expected, and systematic review and classification of the HESs is warranted.