• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6D
• /
• pp.927-933
• /
• 2006

The Variable Message Signs (VMS) are useful way to reduce the socio-economic costs due to the traffic congestions and delays by providing the information on traffic condition to drivers. This study provided a methodology to determine the locations of VMS's in terms of the minimization of the delay by applying the genetic algorithm. The optimal number of VMS's was also derived by the economic analysis based on the cost and the benefit. The simulation considered the variation of traffic volume, the frequency and duration of the incident, and the traffic conversion in order to reflect the real situation. I've made a scenario to consider traffic volume and incident, and it can undergo through changing different traffic volume and incident in time and days and seasons. And I've comprised two kinds of result, one is based on empirical studies, the other is based on Genetic Algorithm about optimal allocation VMS. This result of using optimal location VMS, reduce total travel time rather than preceding study based on normal location VMS and we can estimate optimal location VMS each one.

• Proceedings of the Safety Management and Science Conference
• /
• 2010.11a
• /
• pp.113-129
• /
• 2010

Proper pre-safety training is one of core mandatory in order to reduce injuries at the construction fields. In this study, we investigate the employee's opinions of safety training, safety recognition, the actual conditions of safety through survey. As a result of study, incident factors are roughly divided into technical factor, managerial factor, and educational factor. We confirmed that the educational factor led by deficiency of safety awareness and knowledge was the major factor. It needs to be resettled or revised properly to match with the incident trends and the safety training curriculum should also be improved and drastically revised with special quality. The managerial workers' safety recognition is lower than the site ones regarding the correct understanding of the importance of the training.. It suggest that the education method and system in construction fields might have fundamental problems.

• ETRI Journal
• /
• v.25 no.1
• /
• pp.41-48
• /
• 2003

This paper presents a theoretical investigation of power reflection and transmission coefficients for a meander-line polarizer placed periodically on a chiral slab. It is assumed that a linearly polarized transverse magnetic wave is incident on a chiral slab from the air region. In the analysis, we derive the electric and magnetic fields in the modal form in the air and chiral regions. We obtain power reflection and transmission coefficients in a straightforward manner after matching the tangential components of the electric and magnetic fields at the boundaries. We present numerical results for the power reflection and transmission coefficients versus frequency and incident angle for different values of the chirality admittance. A meander-line polarizer placed on a dielectric slab can convert a linearly polarized wave to a circularly polarized wave. The design parameters for a meander-line polarizer are the dimensions of the meander-line and the values of the dielectric slab. Replacing a dielectric slab with a chiral slab introduces a new independent parameter which controls the wave polarization.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.3
• /
• pp.612-623
• /
• 1994

Shock-wave focusing from a two-dimensional parabolic reflector was simulated using an explicit finite volume upwind TVD scheme. Computations were performed for three different incident shock speeds of $M_s$ = 1.1, 1.2 and 1.3, corresponding to the relatively weak, intermediate, and strong shock waves, respectively. Numerical solutions nicely resolved all the waves evolving through the focusing process. As the incident shock strength increase, a transition was observed in the shock-fronts geometry that was caused by the change in the reflection type of converging shock fronts on the axis of symmetry, from regular-type to Mach-type reflection. The computed maximum on-axis pressure amplification and the trajectories of three-wave intersections showed good agreement with experimental results. The strong nonlinear effect near the focal region which determines the shock-fronts geometries at and behind the focus and at the same time confines the pressure amplification at the focus was clearly revealed from the present numerical simulation.

• Korean Journal of Optics and Photonics
• /
• v.13 no.1
• /
• pp.27-31
• /
• 2002

We design a 1$\times$4 optical splitter made of photonic crystal waveguides and analyze the properties of the optical splitter using the finite-difference time-domain method with perfectly-matched-layer absorbing boundaries. The photonic crystal is constructed from cylindrical rods in air on a square lattice. Our simulation results show that there are different transmission properties for four bend geometries and different incident-wave frequencies. The sum of the power transmission of the splitted light is over 93 percent at a certain geometry and frequency, and the incident power splits in the four arms with almost the same ratio.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.05a
• /
• pp.234-237
• /
• 2001

In this study, efforts were made to understand the propagation of electromagnetic wave through the foam core sandwich structure by the analytical model. Foam core sandwich structure is composed of glass/epoxy composite skins and foam core. Transmittance and reflectance of the arbitrary linearly polarized incident TEM waves through the unidirectional composites, foam and foam core sandwich structures were determined as functions of thickness, fiber orientation of composites, incident angle and polarization angle by the analytical model. From the results of the analysis, the general tendency of transmittance and reflectance of electromagnetic wave through composites, foam and foam core sandwich structures was obtained.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.10a
• /
• pp.183-186
• /
• 2001

In this paper, the analytical model to understand the propagation of electromagnetic waves in the foam core sandwich structures was proposed. Using the analytical model, efforts were made to find the optimal stacking sequence of composite skins for maximum transmittance of electromagnetic wave. Numerical analyses of unidirectional composites and foam as a function of incident angle were performed. From the results of analysis, the general tendencies of transmittance of electromagnetic wave through composites and foam were obtained. Based on the general tendencies, optimal stacking sequences of composite skins for the maximum transmittance of electromagnetic wave were found with certain ranges of incident angle using genetic algorithm(GA).

• Journal of Ocean Engineering and Technology
• /
• v.10 no.3
• /
• pp.62-73
• /
• 1996

Numerical simulation is made of the three-dimensional wave breaking motion about a part of a floating offshore structure containing a circular cylinder mounted vertically onto a lower hull in regular periodic gravity wave generated by a numerical wave maker. TUMMAC-VIII finite-difference method is newly developed for such a problem. By use of density-function technique the three-dimensional wave breaking motion is approximately implenented in the framework of rectangular grid system. A porosity technique is devised for the implementation of the no-slip bydy boundary conditions. The generation of breaking waves by the interaction of incident waves with the structure is well simulated and interesting features of breaking waves are revealed with containing degree of quantitative and qualitative accuracy.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.4
• /
• pp.479-486
• /
• 2012

Two of fundamental approaches that can be used to understand ion-solid interaction are Monte Carlo (MC) and Molecular Dynamic (MD) simulations. For the simplicity of simulation Monte Carlo simulation method is widely preferred. In this paper, basic consideration and algorithm of Monte Carlo simulation will be presented as well as simulation results. Sputtering caused by incident ion beam will be discussed with distribution of sputtered particles and their energy distributions. Redeposition of sputtered particles that are experienced refraction at the substrate-vacuum interface additionally presented. In addition, reflection of incident ions with reflection coefficient will be presented together with spatial and energy distributions. This Monte Carlo simulation will be useful in simulating and describing ion beam related processes such as Ion beam induced deposition/etching process, local nano-scale distribution of focused ion beam implanted ions, and ion microscope imaging process etc.

• Applied Science and Convergence Technology
• /
• v.27 no.1
• /
• pp.19-22
• /
• 2018

The ion energy and angle distributions (IEADs) in the DC magnetron sputtering systems are investigated for the variation of gas pressure using particle-in-cell simulation. Even for the condition of collisionless ion sheath at low pressure, it is possible to change the IEAD significantly with the change of gas pressure. The bombarding ions to the target with low energy and large incident angle are observed at low pressure when the sheath voltage drop is low. It is because the electron transport is hindered by the magnetic field at low pressure because of few collisions per electron gyromotion while the ions are not magnetized. Therefore, the space charge effect is the most dominant factor for the determination of IEADs in low-pressure magnetron sputtering discharges.