• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.549-554
• /
• 2008

The recent trains are almost being operated by the mechanical propulsion force to drive the gear and wheel with the traction motor. However Magnetic Levitation Vehicle is differently operated. Magnetic Levitation Vehicle is applied with Linear Induction Motor(LIM) that has many advantage like to high capability of going up to slope, low noise, easy to control of speed. So domestic and many advanced countries are interested in Magnetic Levitation Vehicle and they have been studying about it continuously. Thus this paper is studied the LIM test method of static states and guess the optimum driving point by characteristic of static states for LIM. The test items are measurement of thrust force by changed air gap, measurement of thrust force and normal force by changed slip frequency etc.

• 한국인터넷방송통신학회논문지
• /
• 제22권6호
• /
• pp.21-30
• /
• 2022

본 논문에서는 소형 추적 레이더에 적용 가능한 서보의 설계, 제작, 시험에 대해 기술하였다. 우선 1장에서는 본 연구의 필요성에 대해 기술하였다. 2장에서는 향후 소형 유도무기용 추적 레이다에 적용 가능한 서보 개발에 대해 기술하였다. 3장에서는 브러쉬 직류전동기, 브러쉬리스 직류 전동기, 영구 자석 동기 전동기의 전류 제어를 위한 설계 및 시험 결과를 대해 기술하였다. 그리고 4장에서는 시험 휠의 속도 제어를 위한 설계 및 시험 결과를 기술하였다. 그리고 5장에서는 앞선 시험들의 결과를 정리하였다. 본 논문에서는 보안상의 이유로 일부 그림을 의도적으로 흐림(blur) 처리 하였으며, 개발된 짐벌과의 시험이 아니라 별도의 시험 휠의 제어 결과를 기술하였다.

• 한국자동차공학회논문집
• /
• 제20권1호
• /
• pp.8-13
• /
• 2012

In this paper, Hybrid Electric Vehicle is directly designed and manufactured for base study of HEV's system and Green Car. Foundation design consists of power train design and the frame design. The power train concept includes motor, engine, generator and battery. And the concept of the frame is the single-seat of this self-made HEV. A frame installed in hybrid system contains suspension, steering wheel, seat, accelerating pedal, brake pedal, clutch handle and various chassis parts with bearings. Electromagnetic clutch is equipped to transmit engine power to drive axle. The control algorism make using LabVIEW to control of an engine and a motor depending on drive condition. A parallel type hybrid system is manufactured to control operation of a motor and an engine depending on vehicle speed.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제12권2호
• /
• pp.79-90
• /
• 2012

The torsion beam type of rear suspension has been adopted by most manufactures of small to medium front wheel drive passenger cars. Previous studies analyzed only the load characteristics of CTBA(the coupled torsion beam axle)'s components. This paper analyzed the results of measurement after measuring loads and displacements, angles when a car equipped with the coupled torsion beam axle is driving in various roads. The most important durability factors for CTBA part are the force and direction of rear CTBA trailing arm. If there are design changes, it was difficult to make a sensor and install each time for measuring the trailing arm forces. After analyzing the loading histories between body and chassis, we developed the transformation matrix that can be converted to mutual force. This paper also deals with the analysis of the force behavior through the analysis of the influence and correlation between the body and chassis parts of cars.

• 한국자동차공학회논문집
• /
• 제7권9호
• /
• pp.105-111
• /
• 1999

The paper presents development of a Hardware-In-the-Loop simulation (HILS) system for the purpose of testing performance, stability, and reliability of an electronic power steering system(EPS). In order to realistically test an EPS by the proposed HILS apparatus, a simulated uniaxial dynamic rack force is applied physically to the EPS hardware by a pnumatic actuator. An EPS hardware is composed of steering wheel &column, a rack & pinion mechanism, andas motor-driven power steering system. A command signal for a pneumatic rack-force actuator is generated from the vehicle handling lumped parameter dynamic model 9software) that is simulated in real time by using a very fast digital signal processor. The inputs to the real-time vehicle dynamic simulation model are a constant vehicle forward speed and from wheel steering angles driven through a steering system by a driver. The output from a real-time simulation model is an electric signal that is proportional to the uniaxial rack force. The vehicle handling lumped parameter dynamic model is validated by a fully nonlinear constrained multibody vehicle dynamic model. The HILS system simulation results sow that the proposed HILS system may be used to realistically test the performance stability , and reliability of an electronic power steering system is a repeated way.

• 한국정밀공학회지
• /
• 제22권5호
• /
• pp.189-196
• /
• 2005

The numbers of the elder are rapidly growing who wants to enhance social activities, because Korea is already an aging society since 2000. The mobility and accessibility are the key issues to enhance them. The electric motor scooter and the power wheel chair are efficient movable means at a short range. It would be needed to get on and off them if the elder wants use them after arriving a long distant destination. But the electric scooter is too heavy for a man to get on and off a coach van. The motor winch lift is developed for the elder and the handicapped to get on and off a van easily. The lift consists of 3-linkage which can be installed in a trunk of a van with a small space. The clearance and stress of each component are checked by a computer simulation. The prototype was made. and the performances of safety and comfortableness were verified by operational ability test and durability test.

• 한국전자통신학회논문지
• /
• 제18권1호
• /
• pp.177-184
• /
• 2023

본 논문에서는 아두이노를 기반으로 3D 프린터의 하단부에 차량을 설치하여 3D 프린터의 이동 공간을 확장할 수 있는 차량을 제어할 수 있도록 구현하였다. 차량의 전면부 바퀴에 스테핑 모터를 장착하고 모터 드라이버를 사용하여 정밀 제어하였다. 그 결과 5cm와 25cm, 50cm 이동 시 평균 오차율이 각각 0.6%, 0.04%, 0.02%로 정밀한 거리를 제어할 수 있는 것을 확인하였다.

• 한국기계가공학회지
• /
• 제14권6호
• /
• pp.111-121
• /
• 2015

The objective of this study is to develop an automatic object changer unit to improve changing process problems existing in the conventional horizontal machining center. In order to perform this objective, an upward and downward traverse unit was designed. This unit consists of a motor, reducer, chain and sprocket wheel, and an upper and lower base. This automatic object changer unit performs a sliding contact motion in a purpose built and designed frame. Constraint conditions for the upward and downward traverse unit were first designed. Then, an operation mechanism was designed and introduced as the sum of the kinetic energy for the sprocket wheel and the upper and lower base and which was based on the moment of inertia, which is the kinetic energy of the converted upward and downward traverse unit in the side of the reducer. The paper covers the design of th e Automatic Pallet Changer for th e machining center.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 추계학술대회 논문집
• /
• pp.183-187
• /
• 2012

In the present study, a feasibility study on an innovative satellite attitude control actuator is performed. The actuator is specially designed to generate the reaction torque in an arbitrary axis, so that a satellite attitude can be controlled by using itself. It consists of a spherical flywheel and electromagnets for levitation and rotation control of the ball. As the earlier study, a rotating performance test on the spherical actuator is conducted in a single rotating axis and vertical levitation condition. From the test results, it can be confirmed that the maximum speed and torque of the innovative device are 7,200rpm and 0.7Nm, respectively. Using torque-voltage characteristics of the spherical motor, an open-loop control (V/f constant control) is performed, and the test results show excellent control performance in acceleration and deceleration phases.

• 전자공학회논문지SC
• /
• 제37권3호
• /
• pp.9-18
• /
• 2000

본 논문에서는 구륜 이동 로봇의 기구학적 불완전성에 기인한 주행오차를 감소시키기 위한 방법을 제안한다. 별도의 표식장치 없이 엔코더만을 이용하여 구륜 반경과 차축변위를 보정한다. 또한 모터제어기의 가속해상도의 제약에 기인한 방향각 오차를 보상하기 위한 속도궤적을 제안한다. 제안된 속도궤적에 따라, 2개의 구동구륜 중 임의의 한 구륜의 속도는 주행거리에 따라 가변된다. 완전한 기구학적 보정이 이루어져도, 구륜 이동 로봇은 완전한 직선 주행을 할 수 없으며, 이러한 현상은 모터 제어기의 가속 해상도의 제약에 기인함을 보인다. 본 논문에서 제안된 방법의 유효성을 입증하기 위해 2 자유도 구륜 이동 로봇에 대해 실험을 수행하고 그 결과를 제시한다.