• 한국농공학회논문집
• /
• 제51권3호
• /
• pp.37-43
• /
• 2009

The objective of this study was to investigate the basic relationships between spectral reflectance and varying concentrations of sediment in surface waters. An experimental method for determining suspended sediment concentration (SSC) in the water by use of a spectroradiometer above the water surface, in visible and near-infrared (NIR) wavelengths, is applied. The main advantage of the method is the direct comparison of spectral reflectance and the SSC, but it requires an accurate knowledge of the water body and sediment. Therefore numerous spectroradiometric measurements are carried out in situ measurements, for SSC, ranging from zero to 100 percentage and two types of sediment applied in the water tank. The results indicate that the suspended sediment causes increasing spectral reflectance response in waters. We observed that spectral reflectance increases with SSC, first at the lower wavelengths (430-480 nm), then in the middle wavelengths (570-700 nm), and finally, in the NIR domain (800-820 nm); a characteristic maximum reflectance appears at 400-670 nm. Relationships between the wavelength, integral value, and the SSC were evaluated on the basis of the regression analysis. The regression curve for the relation between the wavelength, integral value, and the SSC were determined ($R^2$>0.98). Finally, the specular wavelength can be estimated to recognize the sediment and to improve SC estimation accuracy in the water.

• Ocean and Polar Research
• /
• 제37권1호
• /
• pp.11-22
• /
• 2015

In-situ measurements are labor-intensive, time-consuming, and limited in their ability to observe currents with spatial variations in the surf zone. This paper proposes an optical image-based method of measurement of currents in the surf zone. This method measures nearshore currents by tracking in time wave breaking-induced foam patches from sequential images. Foam patches in images tend to be arrayed with irregular pixel intensity values, which are likely to remain consistent for a short period of time. This irregular intensity feature of a foam patch is characterized and represented as a keypoint using an image-based object recognition method, i.e., Scale Invariant Feature Transform (SIFT). The keypoints identified by the SIFT method are traced from time sequential images to produce instantaneous velocity fields. In order to remove erroneous velocities, the instantaneous velocity fields are filtered by binding them within upper and lower limits, and averaging the velocity data in time and space with a certain interval. The measurements that are obtained by this method are comparable to the results estimated by an existing image-based method of observing currents, named the Optical Current Meter (OCM).

• Journal of Radiation Protection and Research
• /
• 제26권3호
• /
• pp.321-326
• /
• 2001

Radionuclide X-ray fluorescence analysis is a method, which has many advantages for analysing various historic artefacts, as it is relatively cheap, sensitive and non-destructive, and it allows measurements in-situ. However, this analysis has also certain limitations especially concerning sensitivity to chemical elements only, irrespective of the compounds or chemical forms in which these elements have been bonded. In addition, light elements emitting very soft X-rays cannot be measured, and in order to detect a wide range of elements, it is necessary to carry out repeated measurements with different radiation sources. Despite these limitations, valuable information can be obtained about the composition of historic materials and data about the origin and age of these artefacts can be derived. Analyses of wall paintings, ancient metal sculptures or other objects of art provide the basis for historic considerations documented in our results for some objects belonging to the Czech cultural heritage. The results are promising. Thus it is expected that our laboratory will expand its work into more fields of the fine and applied arts.

• Macromolecular Research
• /
• 제11권4호
• /
• pp.267-272
• /
• 2003

The isothermal cure reactions of blends of epoxy (DGEBA, diglycidyl ether of bisphenol A)/anhydride resin with polyamide copolymer (poly(dimmer acid-co-alkyl polyamine)) or PEI were studied using differential scanning calorimetry (DSC). Rheological measurements have been made to investigate the viscosity and mechanical relaxation behavior of the blends. The reaction rate and the final cure conversion were decreased with increasing the amount of thermoplastics in the blends. Lower values of final cure conversions in the epoxy/thermoplastic blends indicate that thermoplastics hinder the cure reaction between the epoxy and the curing agent. Complete miscibility was observed in the uncured blends of epoxy/thermoplastics up to $120^{\circ}C$ but phase separations occurred in the early stages of the curing process at higher temperatures than $120^{\circ}C$. According to the rheological measurement results, a rise of G' and G" at the onset of phase separation is seen. A rise of G' and G" is not observed for neat epoxy system since no phase separation is seen during cure reaction. At the onset of phase separation the rheological behavior was influenced by the amount of thermoplastics in the epoxy/thermoplastic blends, and the onset of phase separation can be detected by rheological measurements.

• Smart Structures and Systems
• /
• 제5권6호
• /
• pp.663-679
• /
• 2009

The use of Micro-Electro-Mechanical Systems (MEMS) accelerometers in geotechnical instrumentation is relatively new but on the rise. This paper describes a new MEMS-based system for in situ deformation and vibration monitoring. The system has been developed in an effort to combine recent advances in the miniaturization of sensors and electronics with an established wireless infrastructure for on-line geotechnical monitoring. The concept is based on triaxial MEMS accelerometer measurements of static acceleration (angles relative to gravity) and dynamic accelerations. The dynamic acceleration sensitivity range provides signals proportional to vibration during earthquakes or construction activities. This MEMS-based in-place inclinometer system utilizes the measurements to obtain three-dimensional (3D) ground acceleration and permanent deformation profiles up to a depth of one hundred meters. Each sensor array or group of arrays can be connected to a wireless earth station to enable real-time monitoring as well as remote sensor configuration. This paper provides a technical assessment of MEMS-based in-place inclinometer systems for geotechnical instrumentation applications by reviewing the sensor characteristics and providing small- and full-scale laboratory calibration tests. A description and validation of recorded field data from an instrumented unstable slope in California is also presented.

• 한국지구과학회지
• /
• 제42권6호
• /
• pp.632-645
• /
• 2021

위성 해수면온도 합성장은 수치예보모델의 입력 자료 및 지구온난화와 기후 변화 연구에 활용되는 중요한 자료이다. 본 연구에서는 2007년부터 2018년까지 6종류의 위성 해수면온도 합성장 자료를 수집하여 한반도 주변 해역에서 각 해수면온도 합성장 자료의 공간 분포 특성을 분석하였다. 기상청 해양기상부이 실측 수온 자료와 해수면온도 합성장 자료의 시계열을 비교하고 오차의 최대값 및 최대값이 나타나는 시기를 분석하였다. 황해 연안에 위치한 덕적도와 칠발도 부이에서 위성 해수면온도 합성장과 실측 수온의 차는 1년주기 또는 반년주기의 높은 변동성을 보였다. 포항 부이에서는 강한 용승에 의해 냉수대가 발생한 2013년 여름철에 높은 수온 차가 나타났다. 해수면온도 자료의 시계열을 활용하여 스펙트럼 분석을 수행한 결과, 일별 위성 해수면온도 합성장은 약 1개월 이상의 주기에서는 실측 자료와 유사한 스펙트럼 에너지를 보였다. 반면 위성 해수면온도 합성장과 실측 수온의 스펙트럼 에너지의 차는 시간 주파수가 증가할수록 증가하는 경향을 보였다. 이는 위성 해수면온도 합성장 자료가 연안 부근 수온의 시간적 변동성을 적절하게 표현하지 못하였을 가능성을 시사한다. 위성 해수면온도 영상의 해양 전선은 공간 구조와 강도의 측면에서 위성 해수면 온도 합성장 자료 간 차이점을 보였다. 해수면온도 합성장에서 표현되는 공간 규모 또한 공간 스펙트럼 분석을 통해 조사하였다. 그 결과 고해상도 해수면온도 합성 영상이 저해상도 해수면온도 영상보다 상대적으로 중규모 해양 현상의 공간 구조를 더 잘 표현하였다. 따라서 실제 중규모 해양 현상을 보다 구체적으로 표현할 수 있는 위성 해수면온도 합성장 생산을 위한 고도의 기술 개발이 필요하다.

• Smart Structures and Systems
• /
• 제16권5호
• /
• pp.937-960
• /
• 2015

Tuned mass dampers (TMDs) have been a prevalent vibration control device for suppressing excessive vibration because of environmental loadings in contemporary tall buildings since the mid-1970s. A TMD must be tuned to the natural frequency of the primary structure to be effective. In practice, a TMD may be assembled in situ, simultaneously with the building construction. In such a situation, the respective dynamic properties of the TMD device and building cannot be identified to determine the tuning status of the TMD. For this purpose, a methodology was developed to obtain the parameters of the TMD and primary building on the basis of the eigenparameters of any two complex modes of the combined building-TMD system. The theory was derived in state-space to characterize the nonclassical damping feature of the system, and combined with a system identification technique to obtain the system eigenparameters using the acceleration measurements. The proposed procedure was first demonstrated using a numerical verification and then applied to real, experimental data of a large-scale building-TMD system. The results showed that the procedure is capable of identifying the respective parameters of the TMD and primary structure and is applicable in real implementations by using only the acceleration response measurements of the TMD and its located floor.

• 한국농공학회논문집
• /
• 제58권2호
• /
• pp.53-63
• /
• 2016

Monitoring of cyanobacteria bloom in reservoir systems is important for water managers responsible of water supply system. Cyanobacteria affect the taste and smell of water and pose considerable filtration problems at water use places. Harmful cyanobacteria bloom in reservoir have significant economic impacts. We develop a new method for estimating the cyanobacteria bloom using Landsat TM and ETM+ data. Developed model was calibrated and cross-validated with existing in situ measurements from Daecheong Reservoir's Water Quality Monitoring Program and Algae Alarm System. Measurements data of three stations taken from 2004 to 2012 were matched with radiometrically converted reflectance data from the Landsat TM and ETM+ sensor. Stepwise multiple linear regression was used to select wavelengths in the Landsat TM and ETM+ bands 1, 2 and 4 that were most significant for predicting cyanobacteria cell number and bio-volume. Based on statistical analysis, the linear models were that included visible band ratios slightly outperformed single band models. The final monitoring models captured the extents of cyanobacteria blooms throughout the 2004-2012 study period. The results serve as an added broad area monitoring tool for water resource managers and present new insight into the initiation and propagation of cyanobacteria blooms in Daecheong reservoir.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.168.2-168.2
• /
• 2010

The growing market for geothermal heat pump system requires great consideration of quality control and assurance in design and construction. The borehole heat exchanger of GHP system should be sustainable, economical and ecological. Thermal Response Test (TRT) is a useful method for site investigation to obtain reliable data for a optimal system design from the technical and economical aspect. Intensive researches combined with exchange of experiences on an international level within the IEA ECES Annex 21 improved the technology. Major subjects on the interpretation of TRT are development of improved evaluation models, evaluation of the TRT with respect to geological layers and investigation of the influence of ground water. Current status of TRT in South Korea, as well as a new version of the Korean TRT standard test procedure was presented. TRT is mostly used for governmental supported projects with corresponds to more than 100 GCHP systems per year. More than 200 tests are applied, mostly on single U-tube heat exchangers (about 95%). Bentonite is the most common grouting to be used. KIGAM (Korea Institute of Geoscience & Mineral Resources) is also keeping a GIS geological and geothermal database. In the institute also laboratory measurements of rock properties are carried out. About 90% of the laboratory measurements of the rock heat conductivity shows higher values than the in-situ TRT.

• Progress in Superconductivity
• /
• 제9권1호
• /
• pp.18-22
• /
• 2007

For interlayer tunneling spectroscopy using a small stack of $Bi_2Sr_2CaCu_2O_{8+x}$ (Bi-2212) intrinsic junctions in a high-bias range, large self-heating takes place due to the poor thermal conductivity of Bi-2212. In this study, we numerically estimate the self-heating around a Bi-2212 sample stack for I-V or dI/dV-V measurements. Our results show that the temperature discrepancy between the Bi-2212 sample stack and top Au electrodes due to bias-induced self-heating is small enough along the c-axis direction of Bi-2212. On the other hand, the lateral temperature discrepancy between the sample stack and the Bi-2212 on-chip thermometer stack can be as large as ${\sim}20\;K$ for the highest bias required to observe the pseudogap hump structure. We thus suggest a new in-situ ac thermometry, employing the Au current-bias electrode itself deposited on top of the sample stack as the resistive thermometer layer, which is supposed to allow safe temperature measurements for the interlayer tunneling spectroscopy.