• Fisheries and Aquatic Sciences
• /
• 제11권2호
• /
• pp.103-112
• /
• 2008

Compressional sound velocities of shelf sediments in the South Sea of Korea, were measured in situ and in the laboratory for six cores. In situ sound velocity was measured using the Acoustic Lance (frequency of 7.5-15 kHz), while laboratory velocity was measured by the pulse transmission technique (frequency of 1MHz). Physical properties were relatively uniform with sediment depth, suggesting little effect of sediment compaction and/or consolidation. Average in situ velocity at each core site ranged from 1,457 to 1,488 m/s, which was less than the laboratory velocity of 1,503 and 1,604m/s. In muddy sediments the laboratory velocity was 39-47 m/s higher than in situ velocity. In sandy sediments, the difference was greater by an average of 116 m/s. Although the velocity data were corrected by the velocity ratio method based on bottom water temperature, the laboratory velocity was still higher than the in situ velocity (11-21 m/s in muddy sediments and 91 m/s in sandy sediments). This discrepancy may be caused by sediment disturbance during core collection and/or by the pressure of Acoustic Lance insertion, but it was most likely due to the frequency difference between in situ and laboratory measurement systems. Thus, when correcting laboratory velocity to in situ velocity, it is important to consider both temperature and frequency.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1992년도 봄 학술발표회 논문집
• /
• pp.114-119
• /
• 1992

The main disadvantages of destructive testing methods are the delay in obtaining test results, the relatively high cost of testing, and the lack of reproducibility in the test results. As a result, nondestructive testing methods are generally used. There are three objectives in this paper. The first is to determine the equations of the compressive strength of concrete estimated by Schmidt hammer technique, ultrasonic pulse velocity method and combined method respectively in laboratory. The second is to determine the correction factors according to the concrete age which affects most in evaluating the compressive strength of in-situ concrete. The third is to examine the applicability of the equations to evaluation of the compressive strength of in-situ concrete structures.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.864-867
• /
• 2006

Thermal infrared images of Landsat-5 TM and Landsat-7 ETM+ sensors have been unrivalled sources of high resolution thermal remote sensing (60m for ETM+, 120m for TM) for more than two decades. Atmospheric effect that degrades the accuracy of Sea Surface Temperature (SST) measurement significantly, however, can not be corrected as the sensors have only one thermal channel. Recently, MODIS sensor onboard Terra satellite is equipped with dual-thermal channels (31 and 32) of which the difference of at-satellite brightness temperature can provide atmospheric correction with 1km resolution. In this study we corrected the atmospheric effect of Landsat SST by using MODIS data obtained almost simultaneously. As a case study, we produced the Landsat SST near the eastern and western coast of Korea. Then we have obtained Terra/MODIS image of the same area taken approximately 30 minutes later. Atmospheric correction term was calculated by the difference between the MODIS SST (Level 2) and the SST calculated from a single channel (31 of Level 1B). This term with 1km resolution was used for Landsat SST atmospheric correction. Comparison of in situ SST measurements and the corrected Landsat SSTs has shown a significant improvement in $R^2$ from 0.6229 to 0.7779. It is shown that the combination of the high resolution Landsat SST and the Terra/MODIS atmospheric correction can be a routine data production scheme for the thermal remote sensing of ocean.

• 대한원격탐사학회지
• /
• 제26권2호
• /
• pp.251-262
• /
• 2010

GOCI(Geostationary Ocean Color Imager) 표준자료의 지속적인 품질관리를 위해서는 위성 운용기간 중 궤도상 복사보정, 대기보정 단계를 거쳐야 되며 해수환경 분석 알고리즘에 대한 검보정도 지속적으로 이루어져야 한다. GOCI의 복사, 대기, 해양환경 자료에 대한 검보정은 부이나 고정 플랫폼을 이용한 수온, 염분, 해수 광특성, 형광, 및 탁도 관측과, 주기적으로 해양환경 자료 수집을 통하여 실시한다. 이를 위하여 동중국해에 위치하고 있는 이어도 종합해양과학기지에 설치된 광학 관측 장비와 현장 관측의 복사자료를 상호 비교해 보았으며, GOCI 표준자료의 검정에 앞서 SeaWiFS 복사량과 비교하여 검정하였다. 해수출 광량은 현장관측에서 얻어진 광과 광량과는 약간의 차이를 보였지만, 흡광영역이 매우 잘 일치하고 있으며 스펙트럴 이동은 없는 것으로 판단된다. 이어도 종합해양과학기지의 분광측정기와 SeaWiFS의 전 밴드에서 얻어진 해수출 광량을 비교한 결과 평균 25% 정도의 에러가 발생했지만, 대기보정 밴드를 제외하면 절대오차가 11% 정도로 상당히 낮아진다. 이것은 SeaWiFS 표준 대기보정 방법의 문제점으로 GOCI 검보정 연구에서 고려되어 보완 되어야 할 것으로 판단된다. 이와 더불어 독도 지역의 표준 관측치(Reference Target Site) 구축을 통한 검보정 연구를 위하여, 독도 주변 해수의 광 특성과 해양환경 자료는 2009년 8월과 2009년 10월 2차례에 걸쳐서 현장관측을 실시하였다. 독도 주변 해역의 해양 광 특성은 원격반사도의 스펙트럼형태를 기준으로 Case-1 Water 성향이 강한 해수에서 나타나는 특성과 매우 유사하였다. 식물플랑크톤, 부유물질, 용존유기물의 흡광계수 스펙트럼의 형태들은 대체적으로 각 성분별 흡광 스펙트럼 특성을 잘 보여주었다. 또한 MODIS Aqua로부터 산출된 엽록소 농도와 현장관측을 통한 검증에서 위성자료 값들은 잘 일치한다. 위와 같이 현재 진행되고 있는 GOCI 검보정 연구를 통해서 복사, 대기, 해양환경 알고리즘에 대한 문제점이 도출되었고, 차후 검보정 계획에 반영하여 이 부분들에 대한 개선 및 보완이 이루어질 것으로 판단된다.

• Steel and Composite Structures
• /
• 제9권3호
• /
• pp.209-221
• /
• 2009

Heating correction, through heating and flattening a structure with a pressing machine, is the in-situ method used to repair buckled steel structures. The primary purpose of this investigation is to develop an FEM model which can predict the mechanical response of heat-corrected plates accurately. Our model clarifies several unsolved problems. In previous research, the location of the imperfection was limited to the center of the specimen although the mechanical behavior is strongly affected by the location of the imperfection. Our research clarifies the relationship between the location of the imperfection and the mechanical behavior. In addition, we propose further reinforcement methods and validate their effectiveness. Our research concludes that the strength of a buckled specimen can be recovered by heating correction and the use of an adequate stiffener.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.518-521
• /
• 2007

To retrieve Sea Surface Temperature(SST) from NOAA-AVHRR imagery the spilt window atmospheric correction algorithm is generally used. Recently, there have been various new algorithms developed to process these data, namely the variable-coefficient split-window, the R54 transmittance-ratio method, fixed-coefficient nonlinear algorithm, dynamic water vapour (DWV) correction method, Dynamic Water Vapour and Temperature algorithm (DWVT). We used MCSST (Multi-Channel Sea surface temperature) and NLSST(Non linear sea surface temperature) algorithms in this study. The study area is around the Korea sea area (Yellow Sea). We compared and analyzed with various methods by applying each Ocean in-situ data and satellite data. The primary aim of study is to verify and optimize algorithms. Finally, this study proposes an optimized algorithm for SST retrieval.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.671-674
• /
• 2005

Atmospheric correction over the ocean part is more important than that over the land because the signal from the ocean is very small about one tenth of that reflected from land. In this study, the Spectral Shape Matching Method (SSMM) developed by Ahn and Shanmugam (2004) is evaluated using Landsat imagery acquired over the highly turbid Saemangeum Coastal Area. The result of SSMM is compared with COST model developed by Chavez (1991 and 1997). In principle, SSMM is simple and easy to implement on any satellite imagery, relying on both field and image properties. To assess the potential use of these methods, several field campaigns were conducted in the Saemangeum coastal area corresponding with Landsat-7 satellite's overpass on 29 May 2005. In-situ data collected from the coastal waters of Saemangeum using optical instruments (ASD field spectroradiometer) consists of ChI, Ap, SS, aooM, F(d). In order to perform SSMM, we use the in-situ water-leaving radiance spectra from clear oceanic waters to estimate the the path radiance from total signal recorded at the top of the atmosphere (TOA), due to the reason that the shape of clear water-leaving radiance spectra is nearly stable than turbid water-leaving radiance spectra. The retrieved water-leaving radiance after subtraction of path signal from TOA signal in this way is compared with that estimated by COST model. The result shows that SSMM enabled retrieval of water-leaving radiance spectra that are consistent with in-situ data obtained from Saemangeum coastal waters. The COST model yielded significantly high errors in these areas.

• Geomechanics and Engineering
• /
• 제18권1호
• /
• pp.11-20
• /
• 2019

The purpose of this study was to propose a new approach for quantifying in situ rock mass damage, which would include a degree-of-damage and the degraded strength of a rock mass, along with its prediction based on real-time Acoustic Emission (AE) observations. The basic approach for quantifying in-situ rock mass damage is to derive the normalized value of measured AE energy with the maximum AE energy, called the degree-of-damage in this study. With regard to estimation of the AE energy, an AE crack source location algorithm of the Wigner-Ville Distribution combined with Biot's wave dispersion model, was applied for more reliable AE crack source localization in a rock mass. In situ AE wave attenuation was also taken into account for AE energy correction in accordance with the propagation distance of an AE wave. To infer the maximum AE energy, fractal theory was used for scale-independent AE energy estimation. In addition, the Weibull model was also applied to determine statistically the AE crack size under a jointed rock mass. Subsequently, the proposed methodology was calibrated using an in situ test carried out in the Underground Research Tunnel at the Korea Atomic Energy Research Institute. This was done under a condition of controlled incremental cyclic loading, which had been performed as part of a preceding study. It was found that the inferred degree-of-damage agreed quite well with the results from the in situ test. The methodology proposed in this study can be regarded as a reasonable approach for quantifying rock mass damage.

• 대한원격탐사학회지
• /
• 제35권6_1호
• /
• pp.1011-1030
• /
• 2019

인공위성 또는 항공기에서 사용되는 원격탐사용 센서는 지구 대기를 통과하는 전자기파를 측정하므로, 지구 대기에 의하여 흡수 또는 산란되는 과정에서 지표면의 정보가 영향을 받게 된다. 인공위성은 탑재센서의 사용목적에 따라 파장범위, 해상도가 다르지만, 공통적으로 지구 표면의 대상의 분광신호를 정확히 측정하기 위하여 대기에 의한 영향을 제거해야 하는 대기보정이 이루어져야 한다. 대기보정의 목적은 원격탐사 영상에서 대기 효과를 제거하여 지표면 반사도 값을 결정하고 지표면의 물리적 매개 변수를 도출하는 것이다. 현재까지 개발된 대기보정 알고리즘은 영상기반의 경험적인 방법 또는 현지 관측 자료를 이용한 간접적인 보정 방법에서 보다 복잡한 복사전달과정을 수치해석적으로 해석하는 직접적인 보정 방법으로 발전해 왔다. 본 연구는 지난 40여년 동안 개발된 대기보정 알고리즘에 대한 연구 기록을 분석함으로써, 대기보정 기술의 현황 및 주요 대기보정 알고리즘에 대한 연구 결과를 체계적으로 정립하여 관련 기술의 현황 및 연구동향을 제시하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.48-52
• /
• 2001

In this paper presents an accurate AFM used that is free from the Z-directional distortion of a servo actuator is described. Two mathematical correction methods by the in-situ self-calibrationare employed in this AFM. One is the method by the integration, and the other is the method by inverse function of the calibration curve. The in situ self-calibration method by the integration, the derivative of the calibration curve function of the PZT actuator is calculated from the profile measurement data sets which are obtained by repeating measurements after a small Z-directional shift. Input displacement at each sampling point is approximately estimated first by using a straight calibration line. The derivative is integrated with reference to the approximate input to obtain the approximate calibration curve. Then the approximation of the input value of each sampling point is improved using the obtained calibration curve. Next the integral of the derivative is improved using the newly estimated input values. As a result of repeating these improving process, the calibration curve converges to the correct one, and the distortion of the AFM image can be corrected. In the in situ self-calibration through evaluating the inverse function of the calibration curve, the profile measurement data sets were used during the data processing technique. Principles and experimental results of the two methods are presented.