• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.4
• /
• pp.1811-1815
• /
• 2014

Background: In clinical trials with no upper age limit, the proportion of older patients is usually small, probably reflecting the more conservative approach adopted by clinicians when treating the elderly. An exploratory analysis of elderly patients in the RECORD-1 Trial showed that patients ${\geq}$ 65 y.o. had superior median PFS than overall RECORD-1 population (5.4 months and 4.9 months, respectively). We investigated the efficacy, relative benefit and safety of Everolimus (EVE) as sequential therapy after failure of VEGFr-TKI therapy for older patients with metastatic renal cell cancer (mRCC), in daily practice. Materials and Methods: 172 consecutive IRB approved patients with mRCC (median age 65, M:F 135/37, 78% clear cell) who received salvage EVE at 39 tertiary institutions between October 2009 and August 2011 were included in this analysis. Some 31% had progressed on sunitinib, 22% on sorafenib, 1% on axitinib, 41% on sequential therapy, and 5% had received other therapy. Patients with brain metastases were not included and 95% of the patients had a ECOG (Eastern Cooperative Oncology Group) performance status (PS) of 0 or 1. Previous radiotherapy was an exclusion criterion, but prior chemotherapy was permitted. Adequate organ function and hematologic parameters were mandatory. EVE administration was approved by the institutional review board at each participating institution and signed informed consent was obtained from all patients. Results: Median time of the whole cohort to last follow-up was 3.5 months (range 0.4-15.2 months). Forty four percent were continuing to take EVE at last followup. There were 86 (50%) patients ${\geq}$ 65 y.o. and 86 (50%) <65 y.o. The percentage of patients who showed PR/SD was higher in the older group than in the younger one (5.9%/61.2% vs 1.2%/46.5%, respectively). Median survival of older patients was also significantly longer (3.5 +/- 0.31 vs 3.1 +/- 0.34, hazard ratio=0.45, CI; 0.255-0.802). Analysis using Cox regression model adjusted for gender, PS, number of metastases, site of metastases, histology, smoking history and age detected an association between age and PFS (p=0.011). The frequency of adverse events in elderly patients treated with EVE was no greater than that in younger patients, although such toxicity may have had a greater impact on their quality of life. Conclusions: Older patients should not generally be excluded from accepted therapies (mTOR inhibitors after failure of VEGFr-TKI therapy) for mRCC.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.1
• /
• pp.1-17
• /
• 2002

The purpose of this study is to examine the possibility of thermal injury to bone tissues during an implant site preparation under the same condition as a typical clinical practice of $Br{\aa}nemark$ implant system. All the burs for $Br{\aa}nemark$ implant system were studied except the round bur The experiments involved 880 drilling cases : 50 cases for each of the 5 steps of NP, 5 steps of RP, and 7 steps of WP, all including srew tap, and 30 cases of 2mm twist drill. For precision drilling, a precision handpiece restraining system was developed (Eungyong Machinery Co., Korea). The system kept the drill parallel to the drilling path and allowed horizontal adjustment of the drill with as little as $1{\mu}m$ increment. The thermocouple insertion hole. that is 0.9mm in diameter and 8mm in depth, was prepared 0.2mm away from the tapping bur the last drilling step. The temperatures due to countersink, pilot drill, and other drills were measured at the surface of the bone, at the depths of 4mm and 8mm respectively. Countersink drilling temperature was measured by attaching the tip of a thermocouple at the rim of the countersink. To assure temperature measurement at the desired depths, 'bent-thermocouples' with their tips of 4 and 8mm bent at $120^{\circ}$ were used. The profiles of temperature variation were recorded continuously at one second interval using a thermometer with memory function (Fluke Co. U.S.A.) and 0.7mm thermocouples (Omega Co., U.S.A.). To simulate typical clinical conditions, 35mm square samples of bovine scapular bone were utilized. The samples were approximately 20mm thick with the cortical thickness on the drilling side ranging from 1 to 2mm. A sample was placed in a container of saline solution so that its lower half is submerged into the solution and the upper half exposed to the room air, which averaged $24.9^{\circ}C$. The temperature of the saline solution was maintained at $36.5^{\circ}C$ using an electric heater (J. O Tech Co., Korea). This experimental condition was similar to that of a patient s opened mouth. The study revealed that a 2mm twist drill required greatest attention. As a guide drill, a twist drill is required to bore through a 'virgin bone,' rather than merely enlarging an already drilled hole as is the case with other drills. This typically generates greater amount of heat. Furthermore, one tends to apply a greater pressure to overcome drilling difficulty, thus producing even greater amount heat. 150 experiments were conducted for 2mm twist drill. For 140 cases, drill pressure of 750g was sufficient, and 10 cases required additional 500 or 100g of drilling pressure. In case of the former. 3 of the 140 cases produced the temperature greater than $47^{\circ}C$, the threshold temperature of degeneration of bone tissue (1983. Eriksson et al.) which is also the reference temperature in this study. In each of the 10 cases requiring extra pressure, the temperature exceeded the reference temperature. More significantly, a surge of heat was observed in each of these cases This observations led to addtional 20 drilling experiments on dense bones. For 10 of these cases, the pressure of 1,250g was applied. For the other 10, 1.750g were applied. In each of these cases, it was also observed that the temperature rose abruptly far above the thresh old temperature of $47^{\circ}C$, sometimes even to 70 or $80^{\circ}C$. It was also observed that the increased drilling pressure influenced the shortening of drilling time more than the rise of drilling temperature. This suggests the desirability of clinically reconsidering application of extra pressures to prevent possible injury to bone tissues. An analysis of these two extra pressure groups of 1,250g and 1,750g revealed that the t-statistics for reduced amount of drilling time due to extra pressure and increased peak temperature due to the same were 10.80 and 2.08 respectively suggesting that drilling time was more influenced than temperature. All the subsequent drillings after the drilling with a 2mm twist drill did not produce excessive heat, i.e. the heat generation is at the same or below the body temperature level. Some of screw tap, pilot, and countersink showed negative correlation coefficients between the generated heat and the drilling time. indicating the more the drilling time, the lower the temperature. The study also revealed that the drilling time was increased as a function of frequency of the use of the drill. Under the drilling pressure of 750g, it was revealed that the drilling time for an old twist drill that has already drilled 40 times was 4.5 times longer than a new drill The measurement was taken for the first 10 drillings of a new drill and 10 drillings of an old drill that has already been used for 40 drillings. 'Test Statistics' of small samples t-test was 3.49, confirming that the used twist drills require longer drilling time than new ones. On the other hand, it was revealed that there was no significant difference in drilling temperature between the new drill and the old twist drill. Finally, the following conclusions were reached from this study : 1 Used drilling bur causes almost no change in drilling temperature but increase in drilling time through 50 drillings under the manufacturer-recommended cooling conditions and the drilling pressure of 750g. 2. The heat that is generated through drilling mattered only in the case of 2mm twist drills, the first drill to be used in bone drilling process for all the other drills there is no significant problem. 3. If the drilling pressure is increased when a 2mm twist drill reaches a dense bone, the temperature rises abruptly even under the manufacturer-recommended cooling conditions. 4. Drilling heat was the highest at the final moment of the drilling process.

• The Journal of Korean Society for Radiation Therapy
• /
• v.25 no.2
• /
• pp.175-180
• /
• 2013

Purpose: Modern radiation therapy technique such as IGRT has become a routine clinical practice on LINAC for decrease patient's set-up error. CBCT can be used to adjust patient set-up error and treat patient more accurately. The Purpose of this study is to evaluate field size of CBCT for improving Image quality and suggest reference date of CBCT field size. Materials and Methods: Image date were acquired using KV CBCT and Catphan phantom (Half fan and full fan mode were scanned from 2 ~16 cm, at intervals of 2 cm). Field size were categorized by Small field size (2 cm, 4 cm), Medium field size (8 cm, 10 cm), Large field size (more than 14 cm) and evaluate. To estimated the CTDi using CTDi phantom and Ion chamber. Results: CT number linearity of Small and Large field size are greater than Medium field size. Spatial resolution are not significantly different without Small field size. But half fan mode is more different than full fan mode. In full fan, except Medium field size, all field size exceed recommendation for HU uniformity. But half pan has stability for all field except Small field size. CTDi makes radical sign function graph in Medium field size. Conclusion: The worst result was given by Small field size for Image quality and practically. Medium field size can be useful to prevent patient from radiation exposure and give better Image quality. So this study recommends that Medium field size (8~10 cm) is more suitable for CBCT.

• Pediatric Infection and Vaccine
• /
• v.20 no.3
• /
• pp.139-146
• /
• 2013

Objective: As per the requirement of Korean Food and Drug Administration, this post-marketing surveillance was conducted in Korea to evaluate the safety and reactogenicity of Poliorix$^{TM}$ following its introduction in 2006. Methods: In this open, multicenter study, the vaccine was administered as per the current practice of Korean doctors and in reference to the guidebook by the Korean Pediatric Society and as indicated in the Korean label which was as follows - for primary vaccination three doses were given to infants at ages 2, 4 and 6 months whereas, for the booster dose a single dose was given to children aged 4-6 years. Safety data during this six year surveillance was collected using diary cards which were distributed to the parents to record adverse events. Results: A total of 639 subjects were enrolled into the study. Of these, 617 subjects and 22 subjects received the vaccine as a primary and booster dose, respectively. At least one unsolicited symptom was reported in 11.4% (73/639) of the subjects during the 7-day follow-up period; upper respiratory tract infection (2.5%;16/639) was the most frequently reported unsolicited symptom. One subject reported at least one unsolicited symptom (gastroenteritis) of grade 3 intensity within the 31-day post-vaccination period. Approximately 1.7% (11/639) of subjects reported 13 serious adverse events (SAEs). All SAEs were resolved by the end of the study. Conclusion: In Korea, primary and booster vaccination with Poliorix$^{TM}$ was well-tolerated in healthy subjects when administered according to the prescribing information as part of routine clinical practice.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.3
• /
• pp.271-280
• /
• 2021

Purpose. The aim of this study was to evaluate the relationship between the patient's occlusion and a cracked tooth by using T-scan occlusal analysis and a quantitative light-induced fluorescence (QLF) technology. Materials and methods. This study was carried out on 51 patients having cracked teeth between January, 2019 and December, 2020. The tooth crack was determined with a Q-ray pen and QLF parameters (ΔF_max and ΔR_max) were obtained by a Q-ray software. T-scan tests were conducted to all subjects and then, the occlusal force and disclosing time were analyzed. Mann-Whitney U test was performed to compare the occlusal force and disclosing time between cracked teeth groups and contra-lateral normal teeth groups (α = .05). Mann-Whitney U test was performed to compare ΔF_max and ΔR_max according to the results of cold/bite tests (α = .05). A Spearman correlation analysis was run to determine the relationship between ΔF_max or ΔR_max and occlusal force or disclosing time (α=.05). Results. The mean occlusal force and disclosing time were significantly higher on cracked teeth than on normal teeth (P < .05). The ΔF_max or ΔR_max were not significantly different according to the results of cold/bite tests (P > .05). There was no correlation between ΔF_max or ΔR_max and occlusal force or disclosing time (P > .05). Conclusion. There was a significant relationship between occlusion and cracked tooth syndrome. QLF has the potential to be a valuable tool for the diagnosis of tooth crack in clinical practice.

• Korean Journal of Psychosomatic Medicine
• /
• v.12 no.2
• /
• pp.135-144
• /
• 2004

Objectives: The aim of this study was to examine the effectiveness of a qigong-based stress management program in pregnant women. Method: A 8 week controlled clinical trial compared 52 pregnant women assigned qigong-based stress management program to 40 pregnant women assigned pregnancy health education program. Edinburgh postnatal depression scale(EPDS), Beck depression inventory(BDI), Spielberger trait state inventory-1(STAI-1), Hamilton depression rating scale(HAM-D), Hamilton anxiety scale(HAM-A) were used to measure anxiety and depression level. Result : Qigong-based stress management group showed significant improvement compared to the education control group on four measures above. Qigong-based stress management group also showed significant improvement at 8 weeks termination on all measures of anxiety and depression compared to pretreatment level. Conclusion : This study showed that qigong-based stress management program can be an effective method for pregnant women.

• Journal of Practical Engineering Education
• /
• v.16 no.4
• /
• pp.587-598
• /
• 2024

This study aimed to evaluate the effectiveness of an action learning-based educational program for domestic nursing students. A systematic review and meta-analysis were conducted following PRISMA guidelines. Limited to the period from January 2013 to December 2023, a search conducted across the electronic databases DBpia, RISS, KCI, KISS, and SCIENCE ON identified a total of 779 documents. From these, 13 documents that met the established selection criteria were ultimately included. Thirteen documents meeting the selection criteria were identified, and quality evaluation was independently performed by two researchers using ROBINS-I. The effect size of the action learning-based education program was analyzed using the 'Meta package' in the R program. The effect size for problem-solving was ESr=.68 (95% CI=.30 to 1.06). For communication skills, the effect size was ESr=.39 (95% CI=-.08 to .85), and for critical thinking, the effect size was ESr=.26 (95% CI=.02 to .50). Action learning-based educational programs have been shown to be an effective method for enhancing problem-solving skills and critical thinking among nursing students. Therefore, there is a need for the active implementation of action learning techniques to further develop nursing students' clinical practice capabilities within nursing education.

• Journal of Korean Medicine Rehabilitation
• /
• v.19 no.1
• /
• pp.135-143
• /
• 2009

Objectives : Low back pain(LBP) is a common disabling disease in clinical practice and loss of working hours due to this condition is huge. The aim of this study was to determine if there was an association between fat deposit of paraspinal muscles as observed on MRI scans in patients presenting with unilateral LBP. Methods : 24 patients who visiting our hospital with a clinical presentation of unilateral LBP were recruited to the study. Patients were between 20 and 30 years and had a history of unilateral LBP within 12 months. After MRI scaning, the images were saved in DICOM file format for Picture Archiving and Communication System(PACS). The percentage of fat infiltrated area was measured using a pseudocoloring technique. Data were analyzed comparing the fat deposits of the muscles on the symptomatic and asymptomatic sides. Paired t-test was used to find the difference between the measurements of fat tissue in individual patients. Results : The amount of fat in the symptomatic side was $7.6{\pm}4.51%$, asymptomatic side was $6.7{\pm}4.29%$. There were increases, statistically significant, in the fat changes of the paraspinal muscles at the L4-5 disc level(P <0.05). Also, men were likely than women to have more fat deposit in symptomatic side(men $8.5{\pm}5.1%$, women $6.5{\pm}3.6%$). Conclusions : The amount of fat in the symptomatic side shows significantly increased than asymptomatic side in the paraspinal muscles at the L4-5 disc level. It suggested that fat infiltration in the muscles associated with LBP. Further studies will be needed to confirm the relationship between the muscle fatty changes and LBP in the large sample size. In addition, the correlation of pain severity with fat infiltration needs to be addressed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.3
• /
• pp.207-214
• /
• 2015

Due to the limitations of conventional removable partial denture prostheses to treat a cleft lip & palate patient who shows scar tissue on upper lip, excessive absorption of the maxillary residual alveolar ridge, and class III malocclusion with narrow palate and undergrowth of the maxilla, 4 implants were placed on the maxillary edentulous region and a maxillary removable implant-supported partial denture was planned using a CAD/CAM milled titanium bar. Unlike metal or gold casting technique which has shrinkage after the molding, CAD/CAM milled titanium bar is highly-precise, economical and lightweight. In practice, however, it is very hard to obtain accurate friction-fit from the milled bar and reduction in retention can occur due to repetitive insertion and removal of the denture. Various auxiliary retention systems (e.g. $ERA^{(R)}$, $CEKA^{(R)}$, magnetics, $Locator^{(R)}$ attachment), in order to deal with these problems, can be used to obtain additional retention, cost-effectiveness and ease of replacement. Out of diverse auxiliary attachments, $Locator^{(R)}$ has characteristics that are dual retentive, minimal in vertical height and convenient of attachment replacement. Drill and tapping method is simple and the replacement of the metal female part of $Locator^{(R)}$ attachment is convenient. In this case, the $Locator^{(R)}$ attachment is connected to the milled titanium bar fabricated by CAD/CAM, using the drill and tapping technique. Afterward, screw holes were formed and 3 $Locator^{(R)}$ attachments were secured with 20 Ncm holding force for additional retention. Following this procedure, satisfactory results were obtained in terms of aesthetic facial form, masticatory function and denture retention, and I hereby report this case.

• Journal of Korean Academy of Nursing
• /
• v.4 no.3
• /
• pp.63-79
• /
• 1974

1. The purpose of this study. The purpose of this study is to plan and investigate short-term nursing education of two-years associate degree program to produce middle-level professional nurses which are needed by-society and nation. Current nursing education in Korea is divided into four years degree program, three years diploma program Even (though) there are differences in the aims of their education, the curriculums are not much different between the education for producing leaders which is its basic purpose and training middle-level professional nurses. Therefore the purpose of associate degree program lies in minimizing the waste of time and finance which are invested for long-term education for middle-level professional nurses. And also this coincide with the policy of national technical training and definite supply of nurse manpower according to health policy for effective role and ability of nurse. 2. The method of study. This is based on the study of literature, research on the actual condition and investigation of opinion- through questionnaire. L) The study of literature: Domestic and foreign literatures for two years associate degree program were studied and investigated. 2) Research on the actual condition : Current three years nursing education program was collected and analysed. 3) Investigation of opinion. The problem of curried nursing education system and the possibility of two years associate degree program were investigated through questionnaire. 3. The result of the study. 1) The trend of recent nursing education. a. The aims of nursing in past chiefly taking care of physical disease of patient has recently changed to nursing of character including physical, mental, socio-economic, educational and psychological condition. b. For the performing systematic and effective nurse's duty according to her role, the-change of educational system which is classified as a range of education the period of education and certificate after graduation has been enforced or fulfilled. c. Nursing education also has a trend to become a collage or two years associate degree program which can get same legal protection as other educational institutions whose basic purpose is education. Attached nursing school to hospital is getting disappeared because of disadvantage of educational system. 2) Problems. Depending upon research on actual condition of current 3 years nursing education program. a. There are too many subjects. b. Contents of education could be doubled because major subjects are subdivided in detail. c. The credits for graduation are too heavy comparing to the period of study or the ability of students. (The necessary credits are 150.8 for three years according to actual investigation 4. There is no certain standard in organizing curriculum therefore there are too much differences between schools. 4. Basic Plan. The plan for two years associate degree program in nursing education depending on demand of professional nursing field of society is based on following items. 1) Training middle-level professional nurse lay emphasis on liberal arts and basic major field. 2) Liberal arts are divided into required and optional subjects and students could take courses by choice. 3) Major subjects are compound together by fields and they become the sciences of nursing Ⅰ,Ⅱ,Ⅲ,Ⅳ and every items has its educational purposes and contents major study includes laboratory practice and clinical experience. 4) The required credits for graduation are to which means 17-18 credits a semester. The above has been planned to solve the problems of current three years nursing education program. In conclusion for the achievement of this system, following items are needed. 1) It is necessary to change educational administration and system such as amendment of educational law or order of educational application of law. 2) Qualified professors should be available to understand and develope the idea or purpose of this educational system. 3) Local medical institutions should be opened widely and educational for clinical training. 4) The job after graduation should he secured positively.