• Journal of the Korea Society for Simulation
• /
• v.8 no.2
• /
• pp.101-109
• /
• 1999

In a commercial facsimile network system, a simulation analysis has been performed using ARENA due to the unavailability of theoretical models. The effect of a priority is compared with that of the current FCFS rule on the arriving call blocking rate and transmission time delay. The result shows that the priority rule reduces more service time delay as the arrival rate increases. A simulation analysis procedure is proposed to select optimal in/out port ratio at various hourly arrival rates with a given multiple-place transmission requests ratio.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.144-144
• /
• 2002

Analysis techniques using stereo-photos of object is used widely in close-range-photogrammetry field. but, there is difficulty to use metric camera for specialist. In this study, stereo images were acquired using metric camera and general digital camera about slide in Youngdong area. And they were generated two DEMs based metric camera and digital camera. And it was analyzed the correlation of two DEMs. Therefore, in research that was presented effectiveness of digital camera take the place of metric camera for slope analysis.

• Smart Structures and Systems
• /
• v.4 no.1
• /
• pp.1-17
• /
• 2008

This study proposes a conceptual framework of in-situ vibration tests and analyses for quality appraisal of non-slender, cast-in-place piles with irregular cross-section configuration. It evaluates a frequency index from vibration recordings to a series of impulse loadings that is related to total soil-resistance forces around a pile, so as to assess if the pile achieves the design requirement in terms of bearing capacity. In particular, in-situ pile-vibration tests in sequential are carried out, in which dropping a weight from different heights generates series impulse loadings with low-to-high amplitudes. The high-amplitude impulse is designed in way that the load will generate equivalent static load that is equal to or larger than the designed bearing capacity of the pile. This study then uses empirical mode decomposition and Hilbert spectral analysis for processing the nonstationary, short-period recordings, so as to single out with accuracy the frequency index. Comparison of the frequency indices identified from the recordings to the series loadings with the design-based one would tell if the total soil resistance force remains linear or nonlinear and subsequently for the quality appraisal of the pile. As an example, this study investigates six data sets collected from the in-situ tests of two piles in Taipu water pump project, Jiangshu Province of China. It concludes that the two piles have the actual axial load capacity higher than the designed bearing capacity. The true bearing capacity of the piles under investigation can be estimated with accuracy if the amplitude of impact loadings is further increased and the analyses are calibrated with the static testing results.

• Korean Journal of Human Ecology
• /
• v.17 no.4
• /
• pp.759-769
• /
• 2008

The purpose of this study was to classify consumption value and analyze the relationship between consumption value typology and fashion product purchasing behavior of college students as consumers. Data were gathered by surveying college students living in Daegu and Kyungbook area using convenient sampling, and 513 questionnaires were used in the statistical analysis. Data were analyzed by frequency, factor analysis, cluster analysis, ANOVA, Duncan-test, Chi-square, and t-test. The findings are as follows. According to the consumption value typologies of college students were classified into three groups such as Social Value oriented, Functional Value oriented, and Differentiated Individuality oriented group. The Social Value oriented group and the Differentiated Individuality oriented group were more conscious of clothing pursuit propensities behavior such as brand, shopping place, and price than Functional Value oriented group. The Functional Value oriented group showed the lowest interest in brand name. Purchasing behavior of casual wear and bags fashion product had the significant effects on the shopping place, and price.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.10
• /
• pp.1571-1579
• /
• 1997

The development of a new material which should be continuously use under severe environment of very high temperature has been urgently requested. For the development of such super-heat resistant materials, the main problem is not only to make the superior thermal barrier properties but also to actively release thermal stress. So, a new concept of functionally graded material(FGM) has been proposed to overcome this problem. A composition and microstructure of FGM are varied continuously from place to place in ways designed to provide it with the maximum function of mitigating the induced thermal stress. So, FGM can be applied in the aerospace, the electronic and the medical field, etc.. In this study, thermal stress analysis of sintering PSZ/NiCrAlY graded material was conducted theoretically using a finite-element program. The temperature condition was sintering temperature assuming a cooling-down process up to room temperature. Fracture damage mechanism was anlayzed by the parameters of residual stress. It could be known that FGM provided with the function of mitigating the induced thermal stress.

• Journal of the Korea Safety Management & Science
• /
• v.18 no.3
• /
• pp.9-15
• /
• 2016

Currently the forest area is 6,370,000 hectare (ha) which occupies 63.7% in Korea. The forest has good functions such as production of forest products, conservation of national land, prevention of disasters, etc. However constructing houses near the forest area make bad situation like illegal waste incineration by resident. So research subject is forest fire caused by waste incineration place including facility. And this study was conducted about statistical analysis and research analysis of the 100 waste incineration places including facilities at the country town. Statistical analysis shows that March is 27% which percentage is the highest number of forest fire in 10 years' average. The number of forest fire caused by waste incineration is 45 which is the third highest number in the fire statistic. The distance between waste incineration place including facility and forest area is 30m, 40m and 50m. That 40m (36%) is the most common distance from forest area. The types of waste incineration are ground (62%), the temporary facility made with oil drum can (35%) and other made with steel sheet, concrete, etc. The result of this study is that government and local government must conduct the improvement measure to reduce illegal incineration such as waste pickup area made with rain and wind proof type installed near residence, expenses for waste treatment, enlightenment and training, etc. Also considering their age and income are needed for realistic improvement.

• Steel and Composite Structures
• /
• v.38 no.6
• /
• pp.717-737
• /
• 2021

A theoretical energy-based model to capture the mechanical response of thick woven composite laminates, which are used in such applications as maritime or aerospace, to high-velocity impact was developed. The dependences of the impact phenomenon on material and geometrical parameters were analysed making use of the Vaschy-Buckingham Theorem to provide a non-dimensional framework. The model was divided in three different stages splitting the physical interpretation of the perforation process: a first where different dissipative mechanisms such as compression or shear plugging were considered, a second where a transference of linear momentum was assumed and a third where only friction took place. The model was validated against experimental data along with a 3D finite element model. The numerical simulations were used to validate some of the new hypotheses assumed in the theoretical model to provide a more accurate explanation of the phenomena taking place during a high-velocity impact.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.1049-1061
• /
• 2013

In this paper, a relative heat exchange rate is numerically compared for cast-in-place concrete energy piles with different heat exchange pipe configurations, and a new design method for energy piles is proposed. An equivalent heat exchange rate was estimated for the W-type (one series loop), multiple U-type (four parallel loops), and coil-type heat exchanger installed in the same large-diameter drilled shaft. In order to simulate a cooling operation in summer by a CFD analysis, the LWT (leaving water temperature) into a energy pile was fixed at $35^{\circ}C$ and then the EWT (entering water temperature) into a heat pump was monitored. In case of continuously applying the artificial maximum cooling load for 100 hours, all of the three types of heat exchangers show the marginally similar heat exchange rate. However, in case of intermittently applying the cooling load with a cycle of 8 hours operation-16 hours off for 7 consecutive days, the coil type heat exchanger exhibits a heat exchange rate only 86 % of the multiple U-type due to measurable thermal interference between pipe loops in the energy pile. On the other hand, the W-type possesses the similar heat exchange rate to the multiple U-type. The equivalent heat exchange rates for each configuration of heat exchangers obtained from the CFD analysis were adopted for implementing the commercial design program (PILESIM2). Finally, a design method for cast-in-place concrete energy piles is proposed along with a design chart in consideration of typical design factors.

• Journal of the Korean association of regional geographers
• /
• v.11 no.5
• /
• pp.405-425
• /
• 2005

Transition from mass tourism to post tourism is closely related with developing various types of cultural tourism. This study attempts to construct a conceptual framework of the development of cultural tourism through identifying the existing development stages of cultural tourism sites from birth to full development. This study clarifies that there exists an organic system among tourism, cultural activities and the production of cultural artifacts. It also found that development of cultural tourism sites goes through the following three stages: positioning and building place image, hard branding, and constructing local system. This study analyzes several key elements for respective of stages, which proved helpful in understanding the development mechanism of cultural tourism sites. It also tries to analyze tourism from an integrated, geographical perspective. The analysis gives us an understanding to the relations between tourism and various aspects of regional society and economy, thus contributing to the development of a system that will lead to active interchanges among those factors. Most of the theoretical background of this study: place identity, place image, activity space, local system and network are based on the concepts and ideas of human geography.

• Strategy21
• /
• s.36
• /
• pp.5-32
• /
• 2015

Geopolitics or Political Geography is an essential academic field that should be studied carefully for a more comprehensive analysis of international security relations. However, because of its tarnished image as an ideology that supported the NAZI German expansion and aggression, geopolitics has not been regarded as a pure academic field and was rejected and expelled from the academic communities starting from the Cold War years in 1945. During the Cold War, ideology, rather than geography, was considered more important in conducting and analyzing international relations. However, after the end of the Cold War and with the beginning of a new era in which territorial and religious confrontations are taking place among nations - including sub national tribal political organizations such as the Al Quaeda and other terrorist organizations - geopolitical analysis again is in vogue among the scholars and analysts on international security affairs. Most of the conflicts in international relations that is occurring now in the post-Cold War years can be explained more effectively with geopolitical concepts. The post - Cold War international relations among East Asian countries are especially better explained with geopolitical concepts. Unlike Europe, where peaceful development took place after the Cold War, China, Japan, Korea, the United States, Taiwan and Vietnam are feeling more insecure in the post-Cold War years. Most of the East Asian nations' economies have burgeoned during the Cold War years under the protection of the international security structure provided by the two superpowers. However, after the Cold War years, the international security structure has not been stable in East Asia and thus most of the East Asian nations began to build up stronger military forces of their own. Because most of the East Asian nations' national security and economy depend on the oceans, these nations desire to obtain more powerful navies and try to occupy islands, islets, or even rocks that may seem like a strategic asset for their economy and security. In this regard, the western Pacific Ocean is becoming a place of confrontation among the East Asian nations. As Robert Kaplan, an eminent international analyst, mentioned, East Asia is a Seascape while Europe is a Landscape. The possibility of international conflict on the waters of East Asia is higher than in any other period in East Asia's international history.