• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.914-917
• /
• 2008

This paper was to discuss the case and cause of debonding defect of wood floor board in apartment house by investigating actual survey. Most frequent defect in wood floor board was debonding of floor board. Scratch, gap and crack of floor board were also found in floor board installment work. Causes of debonding of floor board is shrinkage of cement mortar beneath floor board and expansion of floor board. Haste in floor board work did not provide enough time to dry cement mortar fully, which led to continue to dry after the installment of floor board. It caused moisture movement toward wood floor board. Accordingly, Before floor board work, careful consideration on moisture condition of cement mortar and enough curing time to eliminate the effect of moisture are taken into.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.459-463
• /
• 2006

For the purpose of developing liner board for water-resistant corrugated board in the cold chain system, several types of base paper for corrugated board were purchased from the market and 6 different boards were produced in the paperboard mill by applying the chemicals on the base paper. Then, water-moisture resistant performance and physical properties of the boards were evaluated and compared each other. The liner board which is dried at high temperature with pressure by the Condebelt showed a superior performance in strength over conventional liner boards. Strength of the board increased by surface chemical treatment up to 60% of compressive strength and 30% of bursting strength. Starch insolubilization with Ammonium-Zirconium -Carbonate and surface coating with a surface size and a moisture resistant chemical on CK paper showed the best result. Therefore, this method was recommended to produce the outer liner board for water -resistant corrugated board.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.39 no.1
• /
• pp.9-13
• /
• 2013

Objectives: Bisphosphonates (BP) are widely used in medicine for inhibiting bone resorption; however bisphosphonate-related osteonecrosis of the jaw (BRONJ) is a major side effect of BP. To date, there have been no specific reports on the incidence of BRONJ among Koreans. This study investigated the preliminary results from a nationwide survey of BRONJ in the Departments of Oral and Maxillofacial Surgery (OMFS) at individual training hospitals. Materials and Methods: A total of 15 OMFS departments (10 from dental schools, 4 from medical schools, and 1 from a dental hospital) participated in a multi-centric survey. This study assessed every BRONJ case diagnosed between January 2010 and December 2010. The patient age and BP type were evaluated. Results: A total of 254 BRONJ cases were collected. The majority of BRONJ cases were associated with oral BP therapy, while 21.8% of the cases were associated with intravenous administration. Alendronate was the drug most frequently related to BRONJ (59.2% of cases), followed by risedronate (14.3%) and zolendronate (17.0%). The average age of BRONJ patients was $70.0{\pm}10.1$ years, with a range of 38-88 years of age. With the number of BP patients in Korea reported to be around 600,000 in 2008, the estimated incidence of BRONJ is at least 0.04% or 1 per 2,300 BP patients. Conclusion: The results suggest that the estimated incidence of BRONJ in Korea is higher than the incidence of other countries. Future prospective studies should be carried out to investigate the exact epidemiological characteristics of BRONJ in Korea.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.1
• /
• pp.27-33
• /
• 2011

Carbon board, an electromagnetic shielding new material, is expected to be applied to the art wall by combining draft designs. When environment-friendly architecture materials are used as an interior wall, they are suitable as finishing materials. According to the increasing tendency of the application of carbon board, various styles could be made by decorating the whole or a part of a wall with tiles with module structure or by patterning the wall with panel-type woodcut or pictures or sculpture. And more graphic design based on diverse variation, and reconstruction and combination between other motif is being on the rise as a new expression. In this paper, make it possible to applying in MDF board and carbon board pattern design using the woodcut technique. The structural and physical properties were compared by usability of abrasion, toughness, stability. Samples are analyzed dependent on the hardness and relative density, change of detail pattern design and trimming technique. These results have shown that the possibility of applying of carbon board can be a high rank interior materials, capable of creating value of the living system, connects with MDF board, also can express humanism in a beautiful manner.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.12
• /
• pp.317-328
• /
• 2020

The board of directors play an important role in corporate climate strategy-making and decisions but might also compromise environmental policies to minimize agency cost. This study critically investigates the relationship between the attributes of the board of directors and the degree of sustainability performance for the energy sector as discussed in the literature. Our study cumulates existing knowledge offering important characteristics for a balanced board structure to increase the board's effectiveness in adopting sustainable initiatives that could reduce the adverse impact of an energy corporation's operation on the environment. Crucial attributes of the board of directors deemed to be positively associated with the commitment to reduce carbon footprint in the environment have been identified. Based on our extensive analysis of the literature we propose a conceptual framework that measures the influence of the board of directors' attributes on corporate environmental and social sustainability performance. The proposed framework will be useful as an initial step for top management and regulators to gain a better understanding of the balanced board structure required to achieve the social and environmental sustainability performance of corporations. Further, this paper contributes to a body of knowledge about how the board of directors could play a crucial role in monitoring social and environmental threats.

• Journal of the Korean Wood Science and Technology
• /
• v.18 no.4
• /
• pp.9-17
• /
• 1990

When manufacturing beam by laminating particleboards, the mechanical properties of particleboad-laminated beam would be also improved if the properties, especially mechanical properties of particleboad be reinforced. In this study, steel wires were used to reinforce particleboard. This study was carried out to obtain the basic mechanical properties of the board composed of wood particle and steel wires, focusing on bending strength which is the important factors in laminated beam and it was tried to estimate the relationship between the properties of the particleboard-laminated beam. and the proportion of steel wires to wood particles in particleboards. The result obtained can be summarized as follows: 1. The more steel wires used in boards, the higher value of modulus of rupture in bending was obtained, For example. the density 5 board composed of 14 numbers of steel wires showing 55% improved value than control board. 2. The board with lower density was also made better in higher value of elasticity, the density 0.5 board with 14 numbers of steel wires improved by 170%, the density 0.6 board by 86%, the 0.7 board by 37% and the 0.8 board by 26%. 3. The work to maximum load was improved with more steel wires. for example, the density 0.8 board with 14 numbers of steel wires improved by 31%.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.1
• /
• pp.86-94
• /
• 2020

This study serves as basic research for the development of a new wood-based building finishing material that improved the weakness of inorganic materials such as gypsum board and magnesium board widely used as interior finishing materials and brought out the strength of the wood. The results of evaluating the physical and mechanical properties and the environmental effect related to hazardous substance discharge having manufactured a wood-magnesium laminated composite are as follows. The thermal conductivity and thermal resistance of WML board was improved by about 28~109 percent over magnesium board due to the low thermal conductivity of wood. The adhesive strength of WML board showed a similar result to that of plywood as it exceeds 0.7N/㎟, the adhesive standard of wood veneer which is presented by KS F 3101. Bending strength and screw holding strength were more improved by manufacturing WML board than magnesium board. The WML board manufactured in this study satisfied the criteria for emissions of hazardous substances prescribed in the Indoor Air Quality Control Act, and confirmed the possibility of development as a new wood-based composite material that can replace existing inorganic materials.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.1
• /
• pp.733-739
• /
• 2021

This study investigates the relationships of energy firm-level characteristics, namely; firm size, firm leverage, and firm performance with board diligence among companies listed in Saudi Stock Exchange (Tadawul) for the periods ranging from 2012 to 2019. The final sample of this study consists of 32 firm-year observations. A quantitative approach was adopted to test 3 specific hypotheses developed for the board diligence model. Using the Pooled OLS regression, this study finds that firm size and firm performance are negatively associated with board diligence. The results of this study indicate an insignificant association of firm leverage with board diligence. Besides, firm performance is related negatively to board diligence. This indicates that the board of companies with poor performance increases the number of its meetings because of the increased pressure on the board to improve its oversight operations and address the severe performance challenges. The increased number of board meetings observe the daily management of the company, increase the chances for discussions concerning the performance challenges, and come up with solutions faster. The directors are also likely to encounter heightened pressure to appear more engaged during a company's financial distress since lenders require a meeting of the board or with the board.

• International Journal of Contents
• /
• v.10 no.2
• /
• pp.74-82
• /
• 2014

This paper aims to propose the educational concept and design model of a Smart Board Game appropriate for lower elementary grade students. The Smart Board Game refers to a hybrid, or 'convergent', game format based on the offline format of the conventional board game augmented through the use of smart devices. The substantive aspects of this game format utilize the procedural deduction and problem-solving skills applicable in storytelling methodologies and games, in order to generate and propose contents ideal for the educational environment. The development of the Smart Board Game is conducted through the following stages. First, the study analyzes a number of Smart Board Games currently popular in Korea and abroad, based on identification of the key components and processes of the board game format. The subsequent review of the science curriculum for lower elementary grades aims to determine the aspects conducive for application to Smart Board Games. Lastly, the theoretical framework outlined through the previous stages is used as the basis for the proposal of a detailed model of contents for the smart board game concept.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.3
• /
• pp.1101-1111
• /
• 2021

The current study aims to investigate the influence of different categories of ownership held by different types of board members on bank performance. The study uses a sample of Saudi listed banks for the period from 2011 to 2018. The results of the panel data analysis using firm fixed-effects regression model indicate that bank performance is significantly and positively affected by the chairman ownership and the CEO ownership. However, board independent members' ownership has a negative influence on bank performance. While non-executive board members' ownership and family board members have an insignificant impact on bank performance. Control variables, including board size, non-executive board members, government ownership, leverage, and bank size are significantly associated with bank performance. Overall, the results indicate that Saudi bank performance is higher in smaller banks that have smaller boards with lower non-executive members, lower portion of shares held by independent board members, higher portion of shares held by the chairman, CEO, and government, and higher leverage. The results of this study provide important implications for regulatory authorities and market participants in Saudi Arabia and countries with ownership concentration to understand the actual role of different categories of board ownership on firm performance in addition to optimize board ownership.