• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.1
• /
• pp.33-39
• /
• 2008

In this paper, a broadband rectangular reflector antenna with 16-array elements for WiBro/WiMAX band(2.3${\sim}$3.5 GHz) is designed, and its radiation characteristics are investigated. The designed antenna is composed of the IBBD(Integrated Balun Bow-tie Dipole) elements and has the feed circuit at the rear of the reflector to reduce the unwanted electromagnetic wave from it. To confirm the broadband characteristics of the designed antenna, test antenna is fabricated and its radiation characteristics are measured, compared with calculated results. The measured results show good agreement with the calculated results. As a result of measurements, 1.8GHz of bandwidth(VSWR<1.6) is achieved at $2.06{\sim}3.89GHz$ and the antenna gain over 10.3 dBi. We confirm that the designed antenna can be used as a broadband antenna for WiBro/WiMAX.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.8
• /
• pp.1783-1791
• /
• 2010

Mobile WiMAX system provides broadband wireless access with a variety of services such as voice, video and data communications and providing QoS for each of these services become an important issue. In Mobile WiMAX system, it is important to allocate resources appropriately in order to support the efficient utilization of resources among various real-time and non real-time services. Although many packet scheduling schemes for real-time services in OFDMA system have been proposed, it need to be modified to apply to Mobile WiMAX system. Since Mobile WiMAX supports five types of service classes, QoS constraints of each class should be taken into consideration. In this paper, we propose an efficient packet scheduling scheme to support various services by considering the QoS constraints of each class.

• Journal of Internet Computing and Services
• /
• v.15 no.2
• /
• pp.19-31
• /
• 2014

In this paper, a parallel backoff delay procedure on multiple IEEE 802.15.4 channels and a channel searching method considering the frequency spectrum of WiFi traffic are studied for IEEE 802.15.4 nodes to avoid the interference from WiFi traffic. In order to search the channels being occupied by WiFi traffic, we analyzed the methods measuring the powers of adjacent channels simultaneously, checking the duration of measured power levels greater than a threshold, and finding the same periodicity of sampled RSSI data as the beacon frame by signal processing. In an wireless channel overlapped with IEEE 802.11 network, the operation of CSMA-CA algorithm for IEEE 802.15.4 nodes is explained. A method to execute a parallel backoff procedure on multiples IEEE 802.15.4 channels by an IEEE 802.15.4 device is proposed with the description of its algorithm. When we analyze the data measured by the experimental system implemented with the proposed method, it is observed that medium access delay times increase at the same time in the associated IEEE 802.15.4 channels that are adjacent each other during the generation of WiFi traffic. A channel evaluation function to decide the interference from other traffic on an IEEE 802.15.4 channel is defined. A channel searching method considering the channel evaluations on the adjacent channels together is proposed in order to search the IEEE 802.15.4 channels interfered by WiFi, and the experimental results show that it correctly finds the channels interfered by WiFi traffic.

• Smart Media Journal
• /
• v.4 no.2
• /
• pp.68-76
• /
• 2015

Recently, research on indoor locating techniques using smart device sensors has been conducted actively, Owing to the exponential increase in the use of various smart devices. However, in order to develop indoor location techniques, there are limitations due to the requirement that the tracking system has to function without GPS. In this paper, we propose an accurate indoor locating system that does not require additional infrastructure. The proposed scheme is developed based on the idea that the advantages and disadvantages of "Wi-Fi Fingerprinting" and "Step Detection" techniques are complementary. In the proposed scheme, we track users with "Step Detection," and correct errors with "Wi-Fi Fingerprinting." In this paper, we demonstrate the effectiveness and feasibility of our proposed scheme through experiments.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.2
• /
• pp.101-105
• /
• 2011

This paper calculates protection distance to protect WiBro service from ISM(Industrial Scientific Medical) equipment which is used in the same frequency with WiBro. We analyze with a scenario that WiBro receiver is closed to ISM equipment which has interfering power of CISPR(International Special Committee on Radio Interference) 11 limit. As a result, the protection distance of 14 m was calculated by using MCL (Minimum Coupling Loss) for the worst case. And, the protection distance of 10 m was calculated to meet 5 % interference probability below by using MC(Monte Carlo) for statistic analysis in case of a interferer.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.7
• /
• pp.827-834
• /
• 2014

In this paper, a triple-band U-shaped monopole antenna with T-shaped stub for WLAN(Wireless Local Area Networks)/WiMAX(World interoperability for Microwave Access) applications. The proposed antenna is based on a planar monopole design, and composed of U-shaped of radiating patch, T-shaped strip in U-shaped, for triple-band operation. To obtain the optimized parameters, we used the simulator, Ansoft's High Frequency Structure Simulator(HFSS) and found the parameters that greatly effect antenna characteristics. Using the obtained parameters, the antenna is fabricated. The numerical and experiment results demonstrated that the proposed antenna satisfied the -10 dB impedance bandwidth requirement while simultaneously covering the WLAN and WiMAX bands. And characteristics of gain and radiation patterns are determined for WLAN/WiMAX application.

• The KIPS Transactions:PartC
• /
• v.15C no.4
• /
• pp.263-272
• /
• 2008

Recently, WiBro has been developed to efficiently support real-time broadcasting with wireless system. MBS (Multicast Broadcast Service) based on WiBro has numerous applications such as DMB. Since the current MBS uses only common channel managed by scheduling, it cannot effectively support many users at the same time. This paper proposes a new counting scheme with which the channel mode can be properly switched between common channel and dedicated channel. It thus allows efficient use of limited radio resource in WiBro for the MBS.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.458-459
• /
• 2021

Recently, researches using deep learning technology based on Wi-Fi fingerprints have been conducted for accurate services in indoor location-based services. Among the deep learning models, an RNN model that can store information from the past can store continuous movements in indoor positioning, thereby reducing positioning errors. At this time, continuous sequential data is required as training data. However, since Wi-Fi fingerprint data is generally managed only with signals for a specific location, it is inappropriate to use it as training data for an RNN model. This paper proposes a path generation method through prediction of a moving path based on Wi-Fi fingerprint data extended to region data through clustering to generate sequential input data of the RNN model.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.456-457
• /
• 2021

Recently, in order to more accurately provide indoor location-based services, technologies using Wi-Fi fingerprints and deep learning are being studied. Among the deep learning models, an RNN model that can store information from the past can store continuous movements in indoor positioning, thereby reducing positioning errors. When using an RNN model for indoor positioning, the collected training data must be continuous sequential data. However, the Wi-Fi fingerprint data collected to determine specific location information cannot be used as training data for an RNN model because only RSSI for a specific location is recorded. This paper proposes a region clustering technique for sequential input data generation of RNN models based on Wi-Fi fingerprint data.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.8
• /
• pp.2801-2808
• /
• 2010

The technology of WiBro, combining advantages of high speed internet and wireless internet provides the effectiveness and convenience provided by broadband and convergence. WiBro has developed due to supports of the related industries. The advancement of WiBro have created driving force for network advancement. WiBro is a niche market among high speed Internet, wireless LAN, Mobile phone, wireless internet. Through building relationship between market share and the existed telecommunication service, WiBro could improve the convenience of users. The security controls have to be built considering vulnerabilities of WiBro. Based on the study, the architecture of WiBro was suggested through reviewing the vulnerabilities and security controls in the wireless network and wire network. The appropriate security measures to be applied in the environment of WiBro. The outcomes of the study could improve the usage of WiBro.