• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.298-300
• /
• 2015

Beacon is a signal device, which mainly used to support the safety of the locate and operation of a watercraft and aircraft. Recently, the IT sector BLE (Bluetooth Low Energy) also made possible to operate with less energy over several months using a beacon standards are applied. In addition, the location-based services and technologies using BLE Beacon has attracted attention. However, there is the problem that by using only the position location Beacon devices when high error rate can be measured accurate position. Therefore, in this paper, combines WiFi and Beacon based on Smartphone. Also propose an indoor positioning algorithm reduces the error rate of the position location value.

• The Journal of the Convergence on Culture Technology
• /
• v.2 no.4
• /
• pp.65-70
• /
• 2016

As network communication increases by using public WiFi to check e-mail and handling Internet banking, the danger of hacking public routers continues to rise. While the national policy is to further propagate public routers, users are not eager to keep their information secure and there is a growing risk of personal information leakage. Because wireless routers implement high accessibility but are vulnerable to hacking, it is thus important to analyze hacking to tackle the attacks. In this study, an analysis is made of the encryption method used in WiFi and cases of hacking WiFi by security attacks on wireless routers, and a method for tackling the attacks is suggested.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.12
• /
• pp.1303-1312
• /
• 2008

Satellite WiBro system has high PAPR characteristics in addition to the nonlinear characteristics of the power amplifier. These characteristics reduce amplifying efficiency of the power amplifier and also cause high error rate and interference with adjacent channels. This paper proposed satellite WiBro based system to reduce input signal's IBO of TWTA remarkably by adapting simultaneously PAPR reduction techniques, active-constellation extension technique and pre-distortion technique.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.659-661
• /
• 2013

This paper, we study on multiple wireless network module support for the Android based set-top box. Limitation of mobile OS, Android based set-top box has limited choice of various wireless network modules, Atheros, Realtek, Ralink, etc. In this paper, for the request of Set-top box supplier and market demands, we research on reconfigure & change the Android network HAL(Hardware Abstract Layer) for Wi-Fi networking support and implementation about multiple Wi-Fi module support platform.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.1
• /
• pp.78-101
• /
• 2017

High-quality industrial control is critical to ensuring production quality, reducing production costs, improving management levels and stabilizing equipment and long-term operations. WiFi-based Long Distance (WiLD) networks have been used as remote industrial control networks. Real-time performance is essential to industrial control. However, the original mechanism of WiLD networks does not minimize end-to-end delay and restricts improvement of real-time performance. In this paper, we propose two algorithms to obtain the transmitting/receiving phase cycle length for each node such that real time constraints can be satisfied and phase switching overhead can be minimized. The first algorithm is based on the branch and bound method, which identifies an optimal solution. The second is a fast heuristic algorithm. The experimental results show that the execution time of the algorithm based on branch and bound is less than that of the heuristic algorithm when the network is complex and that the performance of the heuristic algorithm is close to the optimal solution.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.4
• /
• pp.65-71
• /
• 2020

In order to accurately track the trajectory of the smartphone indoors and outdoors, the WiFi Fingerprint method and the Pedestrian Dead Reckoning method are fused. The former can estimate the absolute position, but an error occurs randomly from the actual position, and the latter continuously estimates the position, but there are accumulated errors as it moves. In this paper, the model and Kalman Filter equation to fuse the estimated position data of the two methods were established, and optimal system parameters were derived. According to covariance value of the system noise and measurement noise the estimation accuracy is analyzed. Using the measured data and simulation, it was confirmed that the improved performance was obtained by complementing the two methods.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.4
• /
• pp.295-301
• /
• 2011

A triple-band transceiver module for 2.3/2.5/3.5 GHz mobile WiMAX, IEEE 802.16e, applications is introduced. The suggested transceiver module consists of RFIC, reconfigurable/multi-resonance MIMO antenna, embedded PCB, mobile WiMAX base band, memory and channel selection front-end module. The RFIC is fabricated in $0.13{\mu}m$ RF CMOS process and has 3.5 dB noise figure(NF) of receiver and 1 dBm maximum power of transmitter with 68-pin QFN package, $8{\times}8\;mm^2$ area. The area reduction of transceiver module is achieved by using embedded PCB which decreases area by 9% of the area of transceiver module with normal PCB. The developed triple-band mobile WiMAX transceiver module is tested by performing radio conformance test(RCT) and measuring carrier to interference plus noise ratio (CINR) and received signal strength indication (RSSI) in each 2.3/2.5/3.5 GHz frequency.

• Journal of the Korean Society of Food Culture
• /
• v.34 no.2
• /
• pp.208-216
• /
• 2019

Leuconostoc spp. are generally utilized as kimchi starters, because these strains are expected to have beneficial effects on kimchi fermentation, including improvement of sensory characteristics. Here, we developed a detection method for verifying the presence of the kimchi starter Leuconostoc mesenteroides WiKim33, which is used for control of kimchi fermentation. A primer set for multiplex polymerase chain reaction was designed based on the nucleotide sequence of the plasmids in strain WiKim33, and their specificity was validated against 45 different strains of Leuconostoc spp. and 30 other strains. Furthermore, the starter strain consistently tested positive, regardless of the presence of other bacterial species in starter kimchi during the fermentation period. Our findings showed that application of a strain-specific primer set for strain WiKim33 presented a rapid, sensitive, and specific method for detection of this kimchi starter strain during natural kimchi fermentation.

• Journal of Korea Society of Industrial Information Systems
• /
• v.15 no.2
• /
• pp.23-30
• /
• 2010

This paper presents implementation details of car communications system based on V2I2V model over broadband wireless networks including WCDMA, HSDPA and WiBro. Also, we measures the major performance metrics such as Round Trip Time, end-to-end latency and others between in-vehicle client and location management system by driving across urban areas in Daegu city. Analysis of experimental results would be helpful to consider the applicability of traffic safety services using V2I2V-based car communications over various broadband wireless networks.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.17 no.1
• /
• pp.305-324
• /
• 2006

The requirements to use high speed internet under wireless environment are increased. To satisfy the requirements. the WiBro service combining high speed of wired internet service with mobility of wireless internet service will be launched as an alternative. This paper reviews and analyzes its overview, features, and comparison with existing mobile internet and wireless LAN in the information providing aspect. This paper also proposes how to adapt mobile information service and how to satisfy the requirements to construct mobile library based on the WiBro service. With the current problems in mobile-based information services provided by libraries. especially this paper proposes information service areas. considerations to provide information services, and service provisioning method based on the WiBro service.