• Investigative Magnetic Resonance Imaging
• /
• 제5권1호
• /
• pp.18-23
• /
• 2001

Purpose : To describe the MRI findings in the bronchial anthracofibrosis mimicking lung cancer on CT examination. Materials and methods : Ten patients, who showed CT findings mimicking lung cancer, were selected among fifty patients of bronchial anthracofibrosis proven by bronchoscopic biopsy, consisting of two men and eight women, ranging in age from 58 to 79 years old faverage age, 68 years old). CT scan and MRI were performed in all patients (n=10). Percutaneous lung biopsy on mass was performed in one patient. MRI findings were analyzed with the emphasis on the signal intensity of the mass (n=4), collapsed lung (n=4) and Iymph node (n=10) on axial T1 and T2-weighted images by two radiologists in consensus. No contrast enhancement was used in all cases. Results : CT scan revealed mass (n=4), atelectasis with obstructive pneumonia(n=4) and bronchial wall thickening(n=2). All patients showed enlarged medistinal Iymph nodes(n=10). The mass showed low signal intensity on T1WI and T2WI (n =4). The collapsed lung in patients with atelectasis indicated intermediate signal intensity on T1WI and low signal intensity on T2WI (n= 4). Nine patients showed low sisnal intensity of Iymph node on T1WI and T2WI, except one patient who showed central high signal intensity with peripheral rim of low signal intensity in right lower paratracheal llmph node on T2WI. Conclusion : Low signal intensity of a mass, collapsed lung, and lymph nodes on T2WI in anthracofibrosis patients may be helpful in differentiation of the lesion from lung cancer.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• 제8권2호
• /
• pp.91-99
• /
• 2009

Mobile WiMAX is an emerging technology that can provide ubiquitous Internet access. To provide seamless service in mobile WiMAX environment, delay or disruption in dealing with mobility must be minimized. However offering seamless services on IEEE 802.16e networks is very hard due to long handover latency both in layer 2 and 3. In this paper, we propose a fast cross-layer handover scheme based on prediction algorithm. With the help of the prediction, layer-3 handover activities are able to occur prior to layer-2 handover, and therefore, total handover latency can be reduced. The experiments conducted with system parameters and propagation model defined by WiMAX Forum demonstrate that the proposed method predicts the future signal level accurately and reduces the total handover latency.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• 제46권11호
• /
• pp.61-65
• /
• 2009

It is crucial to derive a protection ratio between two communication systems before deploying a new communication systems in the vicinity of frequencies occupied by the existing communication systems. In this paper, computer simulation based protection ratio estimating scheme between ASTC (Advanced Television Systems Committee) digital broadcasting systems and WiBro (Wireless Broadband Internet) systems is proposed. The proposed scheme can be effectively exploited when a new communication services are deployed in the surplus frequency band after the expiration of the analog television broadcasting scheduled in 2012 in Korea.

• Journal of Korea Multimedia Society
• /
• 제15권8호
• /
• pp.1031-1037
• /
• 2012

In this paper, we propose the interference probability according to distance between mobile stations and the maximal power of interfering transmitter as parameters which are used for analysis to co-exist in co-channel of different systems. In order to analyze interfering between each systems, we consider two cases. First, WiBro is an interfering transmitter and WLAN is a victim receiver. Second, WLAN is an interfering transmitter and WiBro is a victim receiver. When the interfering transmitter is WiBro or WLAN, interference probability according to distance between systems is analyzed by setting transmit power of 25 and 23 dBm, respectively. Analyzed coexistence results under various co-use scenarios may be widely applied into the technique developed to get the coexisting condition for wireless devices using many communication protocols in same frequency.

• Journal of Digital Contents Society
• /
• 제19권5호
• /
• pp.963-969
• /
• 2018

Wi-Fi and Bluetooth technologies are perhaps the most prominent examples of wireless communication technologies used in the Internet of Things (IoT) environment. Compared to widely used Wi-Fi, Bluetooth technology has some flaws including 1:1 connection (one-way) between Master and Slave, slow transmission, and limited connection range; Bluetooth is mainly used for connecting audio devices. Since the release of Bluetooth Low Energy (BLE), some of the flaws of Bluetooth technology have been improved but it still failed to become a competitive alternative of Wi-Fi. This paper presents a method of data transmission through broadcasting in BLE and demonstrates its performance, one-to-many data transfer result. The Connection-Free Data Transmission proposed in this paper will hopefully be utilized in special circumstances requiring 1:N data transmission or disaster security network.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• 제4권1호
• /
• pp.7-13
• /
• 2005

In this paper, we propose the time synchronization module on fiber optic repeater to use optic line delay for obtaining time synchronization between up-link and down-link, in the 2.3 GHz WiBro network using TDD/OFDM (Time Division Duplex/Orthogonal Frequency Division Multiplexing) Generally, when we use fiber optic repeater to remove the shade area, it occurs transmission delay which is caused by optic transmission between RAS (Radio Access Station) and fiber optic repeater and inner delay of fiber optic repeater. Because the WiBro system is adopting a TOO method and there exists the difference of switching time which is caused by these delay between up-link and down-link, it occurs ISI (Inter Symbol Interference), ICI (Inter Carrier Interference). These interference results in the reduction of the coverage. And the inconsistency between Up-Link and Down-Link switching time maybe gives rise to the interruption of communication. In order to prevent these cases, we propose synchronization module using analog optic line delay as the one of synchronizing up-link and down-link. And we propose the consideration factor for the designing time synchronization module and the feature of optic line of analog method. The measurement result of optic line time synchronization module of structure proposed is as follows, the delay error of $0.5{\mu}g$ and the insertion loss value below maximum 4.5dB in range of $0{\sim}40{\mu}s$. These results fully meet the specification of WiBro System.

• Korean Journal of Remote Sensing
• /
• 제26권2호
• /
• pp.209-220
• /
• 2010

One of the most difficult tasks in measuring oceanic conditions is to produce oceanic current information. In efforts to overcome the difficulties, various attempts have been carried out to estimate the speed and direction of ocean currents by utilizing sequential satellite images. In this study, we have estimated sea surface current vectors to the south of the Korean Peninsula, based on the maximum cross-correlation method by using sequential ocean color images of SeaWiFS chlorophyll-a. Comparison of surface current vectors estimated by this method with the geostrophic current vectors estimated from satellite altimeter data and in-situ ADCP measurements are good in that current speeds are underestimated by about 15% and current directions are show differences of about $36^{\circ}$ compared with previous results. The technique of estimating current vectors based on maximum cross-correlation applied on sequential images of SeaWiFS is promising for the future application of GOCI data for the ocean studies.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권11호
• /
• pp.3950-3969
• /
• 2021

Radio Frequency (RF)-based indoor localization technologies play significant roles in various Internet of Things (IoT) services (e.g., location-based service). Most such technologies require that all the devices comply with a specified technology (e.g., WiFi, ZigBee, and Bluetooth). However, this requirement limits its application scenarios in today's IoT context where multiple devices complied with different standards coexist in a shared environment. To bridge the gap, in this paper, we propose a cross-technology localization approach, which is able to localize target nodes using a different type of devices. Specifically, the proposed framework reuses the existing WiFi infrastructure without introducing additional cost to localize Non-WiFi device (i.e., ZigBee). The key idea is to leverage the interference between devices that share the same operating frequency (e.g., 2.4GHz). Such interference exhibits unique patterns that depend on the target device's location, thus it can be leveraged for cross-technology localization. The proposed framework uses Principal Components Analysis (PCA) to extract salient features of the received WiFi signals, and leverages Dynamic Time Warping (DTW), Gradient Boosting Regression Tree (GBRT) to improve the robustness of our system. We conduct experiments in real scenario and investigate the impact of different factors. Experimental results show that the average localization accuracy of our prototype can reach 1.54m, which demonstrates a promising direction of building cross-technology technologies to fulfill the needs of modern IoT context.

• Journal of KIISE:Information Networking
• /
• 제35권4호
• /
• pp.355-366
• /
• 2008

This paper proposes a mobile SCTP (mSCTP) handover scheme for vertical handover between 3G wireless and WiBro networks. To evaluate the proposed mSCTP vertical handover scheme, we implement the mSCTP handover supporting system over Linux platform in which the movement of a mobile node is automatically detected and the mSCTP vertical handover is performed by the mobile node. We analyze and compare the performance of mSCTP handover and Mobile IP handover over the preconfigured testbed. From the numerical results, we can see that the handover latency of mSCTP could be much more reduced, compared to the Mobile IP handover, if the mobile node would sojourn long enough in the overlapping region between the two heterogeneous networks.

• Proceedings of the KSRS Conference
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.316-319
• /
• 2006

Monthly-mean aerosol parameters derived from the 1998-2004 SeaWiFS observations over East Asian waters are analyzed. SeaWiFS GAC Level 1 data covering the Northeast Asian area are collected and processed by the standard atmospheric correction algorithm released by the SeaWiFS Project to produce daily aerosol optical thickness (AOT) and ${{\AA}}ngstr{\ddot{o}}m$ exponent imageries. Monthly mean AOT and ${{\AA}}ngstr{\ddot{o}}m$ exponent values are extracted from the daily composite images for six study areas chosen from the surrounding waters of Japan. A slight increasing trend of ${{\AA}}ngstr{\ddot{o}}m$ exponent is found and interpreted as about 4-5% increase in submicron fraction of aerosol optical thickness at 550nm. Two cloud screening methods, including the standard cloud masking method of SeaWiFS and the one based on the local variance method, are applied to the SeaWiFS data processing, in an attempt to inspect the influence to the observed statistical uptrend which probably induced by different cloud mask algorithms. The variability comes from the different cloud masking algorithms are discussed.