• Journal of Aerospace System Engineering
• /
• v.13 no.2
• /
• pp.10-18
• /
• 2019

In this paper, we present the results of a developed LTE/Wi-Fi-based video transmission system which can be applied in small unmanned aerial vehicles of 25kg or less. The developed video transmission system comprised of airborne datalink terminal, ground datalink terminal, and used LTE and Wi-Fi wireless data communication technologies to transmit videos of resolution higher than HD (720p/30fps, 1080p/30fps) taken by small UAV. The airborne device is designed to efficiently transmit real-time streaming video through the incorporation of H.264 video processing board. Ground tests and evaluation indicated the possibility of the developed system to transmit real-time videos from close distance in regards to non-line-of-sight area.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.3
• /
• pp.23-28
• /
• 2021

In recent years, research on smart factory wireless mobile communication technology that wirelessly remotely controls utilities is being actively conducted. The Wi-SUN(Wireless Smart Utility Network) Alliance proposed Wi-SUN protocol structure suitable for building a platform such as a smart factory as a new wireless communication standardization standard based on EEE802.15.4g/e. It analyzes the performance of the IEEE802.15.4e CSL(Coordinated Sampled Listening) Mode MAC(Media Access Control) in terms of latency and looks at considerations for efficient operation.

• Journal of information and communication convergence engineering
• /
• v.8 no.3
• /
• pp.277-280
• /
• 2010

We report that broadcast messages in Mobile WiMAX networks should be synchronized throughout all the base stations to gain the benefit of beamforming technique. A simple synchronization implementation of broadcast messages in Mobile WiMAX networks is presented. Using this technique, the interference between broadcast messages and beamformed messages can be reduced.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.6
• /
• pp.1327-1332
• /
• 2015

In this paper, we studied several aspects that affect the quality of VoIP using WiFi network. It's clear that the background data traffic within an AP, the end-to-end delay and the traffic loss of TCP/IP network gives serious effects on the voice quality. A kind of access control for the VoIP connection within an AP should be done for the acceptable voice quality.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.4A
• /
• pp.380-387
• /
• 2011

While mobile IPTV services are supported through the mobile WiMAX networks, there must need some guaranteed bandwidth for the IPTV services especially if IPTV and non-IPTV services are simultaneously supported by the mobile WiMAX networks. The quality of an IPTV service definitely depends on the allocated bandwidth for that channel. However, due to the high quality IPTV services and to support of huge non-IPTV traffic over mobile WiMAX networks, it is not possible to guarantee the sufficient amount of the limited mobile WiMAX bandwidth for the mobile IPTV services every time. A Service Level Agreement (SLA) between the mobile IPTV service provider and mobile WiMAX network operator to reserve sufficient bandwidth for the IPTV calls can increase the satisfaction level of the mobile IPTV users. In this paper, we propose a SLA negotiation procedure for mobile IPTV users over mobile WiMAX networks. The Bandwidth Broker controls the allocated bandwidth for IPTV and non-IPTV users. The proposed dynamically reserved bandwidth for the IPTV services increases the IPTV user's satisfaction level. The simulation results state that, our proposed scheme is able to provide better user satisfaction level for the IPTV users.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.3
• /
• pp.497-505
• /
• 2015

Existing Wi-Fi networks require users to follow network settings of the AP (Access Point), resulting in inconveniences for users, and the password of the AP is shared by all users connected to the AP, causing security information leaks as time goes by. We propose, in this work, a personalized secure Wi-Fi network, in which each user is assigned her own virtual Wi-Fi network. One virtual Wi-Fi per user makes the user-centric network configuration possible. A user sets a pair of her own SSID and password on her device a priori, and the AP publishes its public key in a suitable way. The AP also maintains an open Wi-Fi channel, to which users can connect anytime. On user's request, the user device sends a connection request message containing a pair of SSID and password encrypted with the AP's public key. Receiving the connection request message, the AP instantiates a new virtual AP secured with the pair of SSID and password, which is dedicated to that single user device. This virtual network is securer because the password is not shared among users. It is more convenient because the network adapts itself to the user device. Experiments show that these advantages are obtained with negligible degradation in the throughput performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.9
• /
• pp.1939-1946
• /
• 2012

USNs (Ubiquitous Sensor Networks) such as IEEE 802.15.4 ZigBee network share ISM (Industrial, Scientific, and Medical) frequency band with WiFi networks. Once both networks operate in a region, packet collision may happen because of frequency overlapping. To assure this possibility, we conducted experiments where WiFi and ZigBee communication networks had been installed in an area. As a result of the test, successful data transmission rate were reduced due to the frequency overlapping between a WiFi communication channel and a ZigBee communication band. To cope with this problem, we propose a collision avoidance algorithm. In the proposed algorithm, if frequency collision is sensed, new communication channel with different frequency band is allocated to each node. Performance of the proposed frequency collision avoidance algorithm was tested and the results were described.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.7
• /
• pp.1406-1415
• /
• 2012

Though WiMedia supports the higher data rates than other WPAN technologies, a WiMedia device cannot reach other devices which are apart from it more than 10 meter; the limited transmission range of the WiMedia protocol. In this paper, we propose a multi-hop QoS routing protocol to enable WiMedia devices to transmit real-time data to devices that is located out of transmission range. The proposed routing protocol is a hybrid routing protocol, which is the mixed protocol of table-driven and on-demand routing algorithm. In the proposed protocol, a route for a device within 2-hop is established by using the table-driven routing algorithm and a route for the device beyond 2-hop is established by using the on-demand routing algorithm. We perform ns-2 simulation to investigate the performance of the proposed routing protocol with AODV and DSDV. The simulation results show that the proposed protocol's performance is better than AODV and DSDV in terms of the throughput and delay.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.9A
• /
• pp.790-795
• /
• 2011

The need for broadband wireless data networks such as IEEE 802.16e WiMAX systems increases as a variety of wireless information devices like smart phones are adopted rapidly in everyday life. Since most of mobile applications employ TCP as their transport layer protocol, the performance improvement of TCP in WiMAX systems is crucial. This paper proposes an efficient method to transmit uplink piggyback ACK packets by exploiting the uplink packet buffering which happens because of the resource allocation scheme of the WiMAX systems. The proposed method can support not only the ACK filtering but also the merging of the piggyback ACK packets. As a result, the bandwidth reduction in the piggyback ACK packet transmission leads to the improvement of the downlink throughput. The simulation results show that the bandwidth for the ACK packets reduces more than 90%, and the downlink throughput increases at least 30%.

• Journal of Advanced Navigation Technology
• /
• v.25 no.4
• /
• pp.299-304
• /
• 2021

Existing human activity recognition systems detect activities through devices such as wearable sensors and cameras. However, these methods require additional devices and costs, especially for cameras, which cause privacy issue. Using WiFi signals that are already installed can solve this problem. In this paper, we propose a CNN-based human activity recognition system using channel state information of WiFi signals, and present results of designing and implementing accelerated hardware structures. The system defined four possible behaviors during studying in indoor environments, and classified the channel state information of WiFi using convolutional neural network (CNN), showing and average accuracy of 91.86%. In addition, for acceleration, we present the results of an accelerated hardware structure design for fully connected layer with the highest computation volume on CNN classifiers. As a result of performance evaluation on FPGA device, it showed 4.28 times faster calculation time than software-based system.