• International Journal of Railway
• /
• 제5권2호
• /
• pp.84-88
• /
• 2012

Derailment due to wheel failure would cause a tremendous social and economical cost in service operation. It is necessary to evaluate quantitatively the safety with respect to high-speed train. Although the safety of railway wheel has been ensured by an regular inspection, all critical defects cannot be detected in inspection cycles and the wheel has been replaced because a defect quickly become critical for safety. Therefore, it is important to calculate quantitatively the fracture limit and remnant life of damaged railway wheel in wheel-rail system. In present paper, the critical crack size of wheel for high-speed train is simulated based on fracture scenario and the safety of wheel is evaluated.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.7-10
• /
• 2006

In this study, Curve dependent wheel flange lubricator with spray type is investigated and estimated a point of view reducing wheel flange wear and noise, a small crack in the curve. Advantage of curve dependent wheel flange lubricator spray type is found on the basis of the result of field test in comparison with oil spray type lubricator and wheel without wheel flange lubricator on railroad in korea for noise and wheel abraison. the influence of curve dependent wheel flange lubricator spray type on the small crack of wheel is introduced by research papers

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1996년도 추계학술대회 논문
• /
• pp.91-95
• /
• 1996

One must observe abrasive grain of grinding wheel and know their behaviors to understand the grinding mechanism. The behaviors of abrasive grain on the wheel surface. such as shapes distributions and changes were studied to make the grinding mechanism clear but the behaviors of abrasive grains on CBN wheel are not known enough. From this paper the working surface of a grinding wheel is observed by photography in which a picture of a wheel surface is taken by the camera through the microscope on the grinding machine and analyzed with the computer.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 추계학술대회 논문집
• /
• pp.487-494
• /
• 1999

The object of this study is to reduce the subway noise by the low noise wheel. The vibro-acoustic reduction was predicted from the FRF difference between low noise wheel and solid wheel by experimental modal analysis. The low noise wheel and solid wheel were compared in viewpoint of car interior/exterior noise. The effect of low noise wheel on the noise of subway train of 6 vehicles was obtained. But, the application of low noise wheel must be reviewed in some aspect.

• 전력전자학회논문지
• /
• 제15권6호
• /
• pp.498-505
• /
• 2010

In-Wheel System은 고성능의 전기모터를 Wheel에 직접 장착하여 파워트레인 요소를 모두 제거함으로써 차량시스템의 효율을 높인 시스템이다. 추후 친환경 차량에 적용할 수 있는 신개념의 플랫폼을 제공할 수 있는 고효율, 고성능 차량 시스템이기에 다양한 분야에 적용되고 있다. 이러한 시스템의 급증은 우리 생활의 안전과 직결되므로 개발단계에서 부품의 신뢰성을 확인하고 인증하여야 한다. 신뢰성이란 "부품이나 시스템이 주어진 환경에서 고장 없이 일정기간 동안 요구기능을 수행하는 특성"이다. 따라서 본 논문에서는 In-Wheel System의 핵심 부품인 In-Wheel Motor를 신뢰성 평가 중 하나인 내구 수명에 대한 검증 방안을 In-Wheel Motor의 운전 조건으로부터 가감속 토크 및 실효토크를 계산해서 이를 바탕으로 가속수명시험을 위한 속도 패턴을 제안하여 시험시간을 단축하고, 또한 In-Wheel Motor의 수명 신뢰성을 검증한다.

• Journal of Ceramic Processing Research
• /
• 제23권4호
• /
• pp.436-442
• /
• 2022

Gallium nitride (GaN) substrates were ground in two different grinding wheel abrasive sizes of 270 and 800-mesh, and thechange in surface morphologies of the substrates and the depth of subsurface damage (SSD) were observed. With the 800-meshgrinding wheel, the surface roughness (SR) and the depth of SSD of the sample tended to decrease, which was not the casewith the 270-mesh grinding wheel. In the X-ray rocking curve, the sample exhibited some compressive stress with the 270-meshgrinding wheel, but with the 800-mesh grinding wheel, it demonstrated the occurrence of tensile stresses in the sample and adecrease in full width at half maximum (FWHM), which confirms an improvement in the crystallinity. In the Raman spectra,the compressive stress of the 270-mesh grinding wheel and the tensile stress of the 800-mesh grinding wheel were confirmedthrough peak shifts. Photoluminescence (PL) spectra confirmed that the intensity ratio of the yellow luminescence increasedat the 800-mesh grinding wheel, and a blue shift occurred further. These results indicate that the SR and the depth of SSDwere proportional to the abrasive grain size of the grinding wheel. At the same time, the increase in PL intensity at specificpeak positions indicates that the stress stemming from the grinding process was concentrated at the crystal surface. The abovemechanism is illustrated in a schematic diagram, which confirms the possibility of improving the grinding efficiency andsubsequent polishing processes in future applications.

• 한국자동차공학회논문집
• /
• 제11권4호
• /
• pp.189-195
• /
• 2003

The steel wheels are widely used in the passenger cars because of their low cost of production although the aluminum wheels have many advantages in their performance and appearance. It is known that the steering wheel vibration with steel wheels is generated more often than one with aluminum wheels. Both the constant velocity driving test and the m up test are carried out in this study to analyze the causes and path of the steering wheel vibration generated from the steel wheels. And this study shows that the steering wheel vibration is affected by the fastening torque of the wheel mounting bolts between the steel wheel and the suspension disk.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.806-812
• /
• 2008

Many kinds of rolling-stocks that have various control methods are being operated by Seoulmetro which is a history of a city railroad rolling-stock. Seoulmetro is being faced with a wheel management comparing of other lines with a perpendicular wear of wheel and a side damage, and so on, by operating several cars at a loop line. This is causing maintenance expenses increase and deteriorating a fusibility of rolling-stock, for it has an effect on a rolling-stock using. A cutting pattern of wheel and a wear form affect the expected span of a wheel. A wheel cutting cause is classifed into cutting for reprofiling of a flange wear of wheel and for removing every kind defect which originates from wheel wear. In this study, Seoulmetro exhibit a stable rolling-stock use method and a reasonable management method of wheel, analysing wheel exchange condition and cutting management of wheel.

• 한국자동차공학회논문집
• /
• 제24권4호
• /
• pp.439-446
• /
• 2016

An in-wheel motor vehicle is a type of car that is equipped with an electric motor for each wheel. It is possible to acquire vehicle stability through a seperate driving torque control per wheel, since it directly generates the driving torque via the wheel motors. However, the vehicle ride comfort and road holding performance worsen depending on the increase of the wheel weights. In order to compensate for the impaired performance, an integrated chassis control system of the rear in-wheel motor vehicle is proposed. The proposed integrated chassis control system is composed of a driving torque control system, a semi-active suspension system, and an ESC system. According to the vehicle dynamic simulation of an in-wheel motor vehicle equipped with the integrated chassis control system, it is found that the system can improve the driving stability, ride comfort, and driving efficiency of the in-wheel motor vehicle.

• 한국정밀공학회지
• /
• 제27권8호
• /
• pp.20-27
• /
• 2010

A precise evaluation of the contact position and the distribution of contact pressure in a wheel-rail interface analysis is one of the most important procedures to predict fatigue life and wear of wheel and rail. This paper presents the analysis result of finite element method(FEM) to investigate how the deformation of a wheelset, which is the assembly of wheel and axle of a railroad vehicle, affect the contact analysis of wheel and rail. 3D-FEM was used to analyze three contact models; a model with only wheel, a model with wheelset, and a model with simplified wheel and rail geometry. The analysis result of the contact position and the distribution of contact pressure are discussed. It is shown that the analysis results of a model with wheelset represent largest value with respect to contact pressure and contact stress. Furthermore, it is found that the distribution of contact pressure and the contact position is highly affected by the deformation of wheel and axle. It is concluded that the deformation of axle should be considered to evaluate the exact contact parameters in a wheel-rail contact analysis.