• Journal of Broadcast Engineering
• /
• v.13 no.6
• /
• pp.941-950
• /
• 2008

The quality of projector output image is influenced by the surrounding conditions such as the shape and color of screen, and environmental light. Therefore, techniques that ensure desirable image quality, regardless of such surrounding conditions, have been in demand and are being steadily developed. Among the techniques, radiometric compensation is a representative one. In general, radiometric compensation is achieved by measuring the color of the screen and environmental light based on an analysis of camera image of projector output image and then adjusting the color of projector input image in a pixel-wise manner. This process is not time-consuming for small sizes of images but the speed of the process drops linearly with respect to image size. In large sizes of images, therefore, reducing the time required for performing the process becomes a critical problem. Therefore, this paper proposes a fast radiometric compensation method. The method uses color filters for eliminating the color mixing between projector and camera because the speed of radiometric compensation depends mainly on measuring color mixing between projector and camera. By using color filters, there is no need to measure the color mixing. Through experiments, the proposed method improved the compensation speed by 44 percent while maintaining the projector output image quality. This method is expected to be a key technique for widespread use of projectors for large-scale and high-quality display.

• ETRI Journal
• /
• v.30 no.3
• /
• pp.461-468
• /
• 2008

This paper presents a chromatic dispersion monitoring technique using a clock-frequency component for carrier-suppressed return-to-zero (CSRZ) signal. The clock-frequency component is extracted by a clock-extraction (CE) process. To discover which CE methods are most efficient for dispersion monitoring, we evaluate the monitoring performance of each extracted clock signal. We also evaluate the monitoring ability to detect the optimum amount of dispersion compensation when optical nonlinearity exists, since it is more important in nonlinear transmission systems. We demonstrate efficient CE methods of CSRZ signal to monitor chromatic dispersion for optimum compensation in high-speed optical communication systems.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.42-46
• /
• 1993

This paper presents development of a pratical tool deflection compensation system in order to reduce the machining error by the tool deflection in the end-milling process. The system is a tool adapter which includes 2-axis force sensor for detecting tool deflection and 2-axis tool tilting device for adjusting tool position through computer interface in on-line process. In experiments, it is revealed that the force sensor applying parallel plate principle and strain gauge is proper to obtain dynamic process signal, and the tilting device using stepping motor and cam drive mechanism is suitable to have necessary action. By the system and control algorithm, it is possible to get precise machining surface profile without excessive machining error and overcut generated due to increased cutting force in more productive machining condition.

• The Korean Journal of Physiology and Pharmacology
• /
• v.21 no.4
• /
• pp.423-428
• /
• 2017

Vestibular compensation is a recovery process from vestibular symptoms over time after unilateral loss of peripheral vestibular end organs. The aim of the present study was to observe time-dependent changes in long-term potentiation (LTP) at Schaffer collateral-CA1 synapses in the CA1 area of the hippocampus during vestibular compensation. The input-output (I/O) relationships of fEPSP amplitudes and LTP induced by theta burst stimulation to Schaffer's collateral commissural fibers were evaluated from the CA1 area of hippocampal slices at 1 day, 1 week, and 1 month after unilateral labyrinthectomy (UL). The I/O relationships of fEPSPs in the CA1 area was significantly reduced within 1 week post-op and then showed a non-significant reduction at 1 month after UL. Compared with sham-operated animals, there was a significant reduction of LTP induction in the hippocampus at 1 day and 1 week after UL. However, LTP induction levels in the CA1 area of the hippocampus also returned to those of sham-operated animals 1 month following UL. These data suggest that unilateral injury of the peripheral vestibular end organs results in a transient deficit in synaptic plasticity in the CA1 hippocampal area at acute stages of vestibular compensation.

• Transactions of Materials Processing
• /
• v.25 no.5
• /
• pp.301-305
• /
• 2016

The manual modification of stamping die has widely been used in order to reduce springback after sheet metal forming. When UHSS (Ultra High Strength Steel) is used in sheet metal forming, the die design considering springback compensation is more difficult because higher strength sheet has more springback. In this study, the optimization method was used in order to design die geometry considering springback compensation after forming of 1.2GPa UHSS. Die geometries were defined as design variables and the springback distance from the die surface was conducted as object function in optimization process. The optimized die geometry considering springback compensation was performed using finite element and optimization analysis. The simulation results such as thickness distribution and springback amount were compared with measured data using 3D optical measurement system (GOM ARGUS, ATOS). And the prediction of springback amount showed a good agreement within test results.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.11
• /
• pp.1395-1406
• /
• 2001

In order to cover a widespread service range, terrestrial/satellite-mixed network is being combined with terrestrial ATM network. This dissertation analyzes and investigates several previously existent CDV compensation methods in order to compensate CDV arising from interfacing satellite TDMA and ATM. Specifically to supplement the problems of timestamp and cell number counting methods, new Variable Timestamp method for CDV compensation is proposed. To evaluate the proposed method, MMPP(Markov Modulated Poisson Process), which can express VBR service very well, is selected as a cell input traffic model of terrestrial transmitting earth station. After several simulation, it is also confirmed that CDV compensation capability for VBR services is very superior to the cell number counting method. In this case, as the timestamp number Nts increases, CDV compensation capability increases, and the CDV distribution length is reduced.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.10
• /
• pp.975-981
• /
• 2010

Existing error compensation method of industrial electronic absolute displacement detector only depends on skilled engineers. This paper proposes a new table method in order to automatize error compensation. An waveform changes according to the parallel resistance for each pole were tabularized and four waveforms were superimposed to minimize total phase error. These process was verified using simulink. As a result of applying proposed method to the real sensor, peak to peak error was reduced from $3.428^{\circ}$ to $0.879^{\circ}$. In this case, compensation resistance is $4.7k\Omega$ in B pole and $20k\Omega$ in C pole. This compensation rate is comparable to skilled engineers, and it takes 0.8 second which is far shorter than 15 minutes when expert does.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.3
• /
• pp.323-330
• /
• 2016

This paper describes real-time unbalance moment compensation method for line of sight(LOS) stabilization control systems. The factors of system inertia, frictions and unbalance moment affect the control accuracy of drive systems that are equipped to on the move(OTM) platforms requiring LOS stabilization function. In case of the unbalance moment among those factors is continuously changed as variation of relative angle between gravity vector and drive torque vector. Then, consideration of the effect in real-time is very complicate. Therefore, its effect should be designed to be minimized, however, designing it almost zero is impossible in real condition. In other words, it is hard to achieve target performance overcoming stability issue of highly unbalanced systems. To solve these problems, this paper proposes calculation method of unbalance moment by using measured sensor data for LOS stabilization control and its use for control compensation. Also, kinematical converting process and control structure for compensation are explained. The effectiveness of the proposed method as variation of unbalance moment is verified under simulation circumstance modeled by assuming LOS control system with 2-axis gimbal structure.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.7
• /
• pp.841-847
• /
• 1999

For successful assembly of flexible parts, informations about their deformation as well as possible misalignments between the holes and their mating parts are essential. Such informations can be acquired from visual sensors. For robotic assembly, the corrective assembly motion to compensate for such misalignments has to be determined from the measured informations. However, this may not be simply derived from the measured misalignment alone because the part deformation progressively occurs during misalignment compensation. Based on the analysis of flexible parts assembly process, this paper presents a neural net-based inference system that can infer the complex relationship between the corrective motion and the measured information of parts deformation and misalignments. And it verifies the performance of the implemented inference system. The results show that the proposed neural net-based misalignment compensation algorithm Is effective in compensating for the lateral misalignment, and that it can be extended to the assembly tasks under more general conditions.

• Culinary science and hospitality research
• /
• v.10 no.4
• /
• pp.31-49
• /
• 2004

Nowadays, a knowledge management becomes more important as it recognizes and utilizes a industrial knowledge as a significant sources for the improvement of enterprise competitiveness. Moreover, a industrial value tends to be evaluated by a knowledge value. In this study, influencing factors (processes, compensation system, leadership and information technology) on the knowledge sharing for strategies in foodservice Enterprise were investigated. For processes, it was important that the sharing and collecting factors for restaurants in hotel, the knowledge sharing and collecting for family-restaurants, the knowledge utilization and collecting for fast-food restaurants and the knowledge utilization and sharing for special restaurants. In compensation system, both mental and physical compensation were not related with the knowledge sharing in hotel-restaurants. On the other hands, the knowledge sharing in family-restaurants, fast-food restaurants and special restaurants was highly affected by the mental compensation, which indicated that food-service. Enterprise should lay emphasis on mental compensation than physical compensation. In industrial cultures, the influencing factors on the knowledge sharing were rational culture and progressive culture for restaurants in hotel and fast-food restaurants, and for special restaurants and family- restaurants, respectively. The ordering leadership was important factor for restaurants in hotel, fast-food restaurants and family-restaurants, while the knowledge sharing in special restaurants was more influenced by the supporting leadership. For information technology, it was important that the information utilization for restaurants in hotel, special restaurants and fast-food restaurants, and both information utilization and ability for family-restaurants.