• Natural Product Sciences
• /
• 제17권2호
• /
• pp.147-159
• /
• 2011

A high-performance liquid chromatography-electrospray ionization-tandem mass spectrometric method was developed to determine simultaneously eight marker constituents of Forsythiae fructus, and subsequently applied it to classify its two botanical origins. The marker compounds of Forsythia suspensa were phillyrin, pinoresinol, phillygenin, lariciresinol and forsythiaside; those of F.viridissima were arctiin, arctigenin and matairesinol. Separation of the eight analytes was achieved on a phenyl-hexyl column (150${\times}$2.0 mm i.d., 3 ${\mu}M$) using gradient elution with the mobile phase: (A) 10% acetonitrile in 0.5% acetic acid, (B) 40% aqueous acetonitrile. A few fragment ions specific to the types of lignans, among the product ions generated by collisonally induced dissociation (CID) of molecular ion clusters, such as [M-H]$^-$ or [M+OAc]$^-$ were used not only for fingerprinting analysis but for the quantification of each epimer by using multiple-reaction monitoring mode. It was shown good linearity ($r^2{\geq}$ 0.9998) over the wide range of all analytes; intra- and inter-day precisions (RSD, %) were within 9.14% and the accuracy ranged from 84.3 to 115.1%. The analytical results of 40 drug samples, combined with multivariate statistical analyses - principal component analysis (PCA) and hierarchical cluster analysis (HCA) - clearly demonstrated the classification of the test samples according to their botanical origins. This method would provide a practical strategy for assessing the authenticity or quality of the herbal drug.

• Journal of the Korean Society for Nondestructive Testing
• /
• 제30권4호
• /
• pp.373-379
• /
• 2010

EMAT has been applied in various fields for flaw detection and material characterization because it has noncontact property in wave generation and a good mode selectivity. Unfortunately, however, EMAT shows low signal to noise ratio relative to commercial contact transducer because of low energy conversion efficiency. If the phase matching through the control of time delay between each coil consisting of the array EMAT is accomplished, it is expected that it will be a solution for the improvement of low signal to noise ratio. In this experiment, the phased array EMATs which consists of 3 or 4 meander coils and one big magnet were fabricated for surface and vertical shear wave generation. Effect of phased delay control on signal directivity and amplitude enhancement was verified. A slit with the depth of 0.5 mm and a side-drill hole of 0.5 mm diameter were clearly detected by fabricated phased array EMATs, respectively.

• Journal of Sensor Science and Technology
• /
• 제23권2호
• /
• pp.110-113
• /
• 2014

In this paper, we propose and demonstrate a Fabry-Perot interferometer (FPI) optical fiber tip sensor fabricated by a blade-sawing technique using a fiber optic patch cord for high-resolution temperature measurement. The sensor head consists of a short air FP cavity near the tip of a single-mode fiber patch cord tip. The temperature which we can measure is determined through a phase variation of the interference fringes in the reflective spectrum of the sensor. The fiber optic FPI sensor in this work can monitor the environmental temperature very accurately from 40 to $120^{\circ}C$. As a result, the temperature sensitivity is obtained as $38.2pm/^{\circ}C$.

• Korean Journal of Food Science and Technology
• /
• 제37권6호
• /
• pp.1024-1027
• /
• 2005

Rapid and simple method was developed for simultaneous determination of vitamins $D_3\;and\;K_1$ contents in infant formula. Contents of vitamins $D_3\;and\;K_1$, extracted by column-switching HPLC with reversed phase column using enzymatic hydrolysis and organic solvent, in CRM determined by developed method were within certified ranges of standard values.

• Journal of Sensor Science and Technology
• /
• 제31권6호
• /
• pp.423-427
• /
• 2022

A pressure sensor that mimics the sensing ability of human skin has emerged as high-profile technology because it shows remarkable applications in numerous fields such as robotics, human health monitoring, and artificial prosthetics. Whereas recent pressure sensors have achieved high sensitivity similar to that of human skin, they still show limited detection bandwidth. Moreover, once these e-skin are fabricated, their sensitivity and stiffness are fixed; therefore, they can be used for only limited applications. Our study proposes a new adaptive pressure sensor built with uniform gallium microdroplet-elastomer composite. Based on the phase transition of gallium microdroplets, the proposed sensor undergoes mode transformation, enabling it to have a higher sensitivity and wider detection bandwidth compared with those of human skin. In addition, we succeeded in extending a single adaptive pressure sensor to sensor arrays based on its high uniformity, reproducibility, and large-scale manufacturability. Finally, we designed an adaptive e-skin with the sensor array and demonstrated its applications on health monitoring tasks including blood pulse and body weight measurements.

• Advances in aircraft and spacecraft science
• /
• 제10권6호
• /
• pp.495-519
• /
• 2023

The drone serves the customers not served by vans. At the same time, considering the safety, policy and terrain as well as the need to replace the battery, the drone needs to be transported by truck to the identified station along with the parcel. From each such station, the drone serves a subset of customers according to a direct assignment pattern, i.e., every time the drone is launched, it serves one demand node and returns to the station to collect another parcel. Similarly, the truck is used to transport the drone and cargo between stations. This is somewhat different from the research of other scholars. In terms of the joint distribution of the drone and road vehicle, most scholars will choose the combination of two transportation tools, while we use three. The drone and vans are responsible for distribution services, and the trucks are responsible for transporting the goods and drone to the station. The goal is to optimize the total delivery cost which includes the transportation costs for the vans and the delivery cost for the drone. A fixed cost is also considered for each drone parking site corresponding to the cost of positioning the drone and using the drone station. A discrete optimization model is presented for the problem in addition to a two-phase heuristic algorithm. The results of a series of computational tests performed to assess the applicability of the model and the efficiency of the heuristic are reported. The results obtained show that nearly 10% of the cost can be saved by combining the traditional delivery mode with the use of a drone and drone stations.

• Journal of Advanced Navigation Technology
• /
• 제28권4호
• /
• pp.552-558
• /
• 2024

In dispersion management, which involves additionally inserting a dispersion compensation fiber of an appropriate length to eliminate or reduce the chromatic dispersion of a single-mode fiber, determining the form of the dispersion map, which is the cumulative dispersion profile according to the transmission distance, is the most basic and important. In this paper, the various symmetric dispersion map based on trapezoids applied to dispersion-managed links combined with mid-span spectral inversion (MSSI), which compensates for the distortion caused by Kerr nonlinear effects through optical phase conjugation in the middle of the entire transmission link are proposed, and the effect of each dispersion map on distortion compensation of wavelength division multiplexed (WDM) signals is analyzed. Although the degree of compensation varies depending on the factors that determine the detailed shape of the proposed trapezoid-shaped dispersion map and RDPS (residual dispersion per span), overall, it was confirmed that distortion compensation for signals with a small extinction ratio was more effective than distortion compensation for WDM channel signals with a large extinction ratio.

• Korean Journal of Environmental Agriculture
• /
• 제36권3호
• /
• pp.201-210
• /
• 2017

BACKGROUND: The current study was to monitor of 9 veterinary antibiotics (ceftiofur, clopidol, florfenicol, sulfamethazine, sulfamethoxazole, sulfathiazole, tetracycline, tiamulin, and tylosin) in manure using liquid chromatography-tandem mass spectrometry (LC-MS/MS) in positive and negative electrospray ionization mode. METHODS AND RESULTS: Sample preparation was carried out using Mcllvaine buffer and citrate salts to adjust the pH of the sample followed by purification with dispersive solid phase extraction (d-SPE). Separation of analytes during LC-MS/MS analysis was conducted using an Eclipse Plus $C_{18}$ column and the mobile phase was in gradient mode with, 0.1% formic acid and 5 mM ammonium formate in methanol (A) and 0.1% formic acid and 5 mM ammonium formate in distilled water (B). The linearity of the matrix-matched calibrations of all tested antibiotics was good, with $R^2$ determination coefficients ${\geq}0.9920$. The limit of detection (LOD) and quantifications (LOQ) were $0.1-67.0{\mu}g/kg$ and $0.4-200.0{\mu}g/kg$, respectively. Analysis of 13 solid and liquid manure samples taken from the Republic of Korea revealed concentrations less than $0.7{\mu}g/kg$ for tiamulin, $1497.6{\mu}g/kg$ for sulfamethazine. CONCLUSION: To monitor 9 veterinary antibiotics from manure samples in 13 provincial areas throughout the Republic of Korea, an analytical method was developed. The developed method was fully validated and successfully applied for monitoring various veterinary antibiotics in manure samples.

• Journal of KIISE:Computer Systems and Theory
• /
• 제33권3호
• /
• pp.157-165
• /
• 2006

The change of external/internal factors of the cell rquires specific biological functions to maintain life. Such functions encourage particular genes to jnteract/regulate each other in multiple ways. Accordingly, we applied a linear decomposition model IFSA, which derives hidden variables, called the 'expression mode' that corresponds to the functions. To interpret gene interaction/regulation, we used a cross-correlation method given an expression mode. Linear decomposition models such as principal component analysis (PCA) and independent component analysis (ICA) were shown to be useful in analyzing high dimensional DNA microarray data, compared to clustering methods. These methods assume that gene expression is controlled by a linear combination of uncorrelated/indepdendent latent variables. However these methods have some difficulty in grouping similar patterns which are slightly time-delayed or asymmetric since only exactly matched Patterns are considered. In order to overcome this, we employ the (IFSA) method of [1] to locate phase- and shut-invariant features. Membership scoring functions play an important role to classify genes since linear decomposition models basically aim at data reduction not but at grouping data. We address a new function essential to the IFSA method. In this paper we stress that IFSA is useful in grouping functionally-related genes in the presence of time-shift and expression phase variance. Ultimately, we propose a new approach to investigate the multiple interaction information of genes.

• Korean Journal of Optics and Photonics
• /
• 제16권3호
• /
• pp.248-253
• /
• 2005

We designed and fabricated a compact multi-mode interference (MMI) wavelength demultiplexer using the concept of 'Improved Quasi-State' modes. The output power and extinction ratio were improved by utilizing modal phase error which is specially occurred in low-index contrast. For a designed demultiplexer, the mode propagation analysis with effective index approximation shows significant improvement of extinction ratio to -25 dB for both $1.31{\mu}m\;and\;1.51{\mu}m$ wavelength region and the split-length was reduced about 1/5 of other MMI devices. The fabricated device shows successful characteristics for both 1.31 and $1.55{\mu}m$ wavelengths. These results demonstrate the potential of low-index materials system and the embossing process for photonic integrated circuits.