• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.308-319
• /
• 2005

Piezo-ceramics are special materials which transform energy between mechanical and electrical forms. Bender-elements are composite materials consisting of thin piezo-ceramics and elastic shims, and are widely used as actuators and transducers in the field of electronics, robotics, autos and mechatronics utilizing the effectiveness of energy transformation capability. In geotechnical engineering, commercial bender-elements are used in laboratory as source and receiver in the measurements of soil stiffness. The elements were built by using various metal shims sandwiched between piezo-ceramics and coating over the composite in the research. A pair of elements were buried in a concrete block and used as source and receiver to measure the stiffness of the concrete. The test results were verified by comparing with the resonant column testing results. In a preliminary stage of the development of an in-situ seismic testing equipment using bender-elements for soft clay materials, shear waves were generated and measured by burying the elements in the barrel of kaolinite and water mixture. The measured shear wave signals were so distinct for the first-arrival pick that applicability of the elements in the field measurements is very promising.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제19권2호
• /
• pp.209-214
• /
• 1997

Odontogenic cysts are relatively common pathologic lesions found in the oral and perioral structures, but the case of squamous cell carcinoma arising from those cysts are very uncommon. After first reported of that case in 1889 by Herman, Schwimmer collected 56 cases of previously reported squamous cell carcinoma arising in residual odontogenic cyst during about past one century. More than 60% of cases of carcinoma developing in odontogenic cysts arising in inflammatory periapical or residual cyst, and these tumors are usually well-differentiated with relatively good prognosis, and often are diagnosed as benign lesion in radiographic or clinical examination, therefore definitive diagnosis must be made by histologic examintation. We report a case and review the literatures, in our case, 78-year old woman were clinically and radiographically diagnosed as residual odontogenic cyst. But in histologic examination after enucleation of lesion, mass of squamous cell carinoma were observed, but in other area, typical cyst wall and lining epithelium were observed. And in some area, carcinoma in situ and invading squamous cell carcinoma into the lining epithelium were also observed.

• Ocean and Polar Research
• /
• 제27권2호
• /
• pp.197-203
• /
• 2005

Dimethylsulfide (DMS) is the most abundant form of volatile sulfurs in the ocean. Many biogeochemical studies have been conducted in the past several decades to unveil the processes driving the production, transformation and removal of DMS. They have shown that the Southern Ocean is an area with one of the highest levels of DMS concentrations during the austral summer in the global oceans. It has recently been observed that Antarctic krill, Euphausia superba, produces DMS and dissolved dimethyl-sulfoniopropionate (DMSP) in its gazing process. Copepods also produce DMS, and the potential production rates of DMS in the Southern Ocean by krill and copepods are estimated to be as much as $21{\mu}mol\;m^{-2}d^{-1}$ and $0.6{\mu}mol\;m^{-2}d^{-1}$, respectively. These production rates of zooplankton and the presence of phytoplanktot which have high DMSP contents in their cells, might facilitate in situ DMS production in the Southern Ocean.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.385-385
• /
• 2012

Understanding the thermodynamics and structural transformation during the Metal-Insulator Transition (MIT) is critical to better understand the underlying physical origin of phase transition in the vanadiumdioxide ($VO_2$). Here, through the temperature-dependent in-situ high resolutiontransmission electron microscopy (HR-TEM), and systematic electrical transport study, we have shown that the tunable MIT transition of $VO_2$ nanowires is strongly affected by interplay between strain and domain nucleation by ion beam irradiation. Surprsingly, we have also observed that the $VO_2$ rutile (R) metallic phase could form directly in a strain-induced metastable monoclinic (M2) phase. These insights open the door toward more systematic approaches to synthesis for $VO_2$ nanostructures in desired phase and to use for applications including ultrafast optical switching, smart window, metamaterial, resistance RAM and synapse devices.

• 한국정보통신학회논문지
• /
• 제10권4호
• /
• pp.706-711
• /
• 2006

본 연구에서는 SAR영상을 통해 해상풍 산출한 다음 해양연구원의 실시간 해양 해양기상 관측 자료와 비교 분석하여 그 정확도를 한반도 주변해역을 대상으로 파악하였다. SAR를 통해 추출된 해상풍 자료와 실측값의 RMS는 풍속은 0.8m/s, 풍향은 8도로 나타났다. 전체 적으로 실측값과 많은 차이를 보이지는 않지만 FFT 방법에 의한 SAR 영상의 바람 띠를 분석하기 위해서는 최소 10km 이상의 영상을 사용하여야만 하였다. 또한 본 연구에서는 우리나라 연안의 Radarsat SAR 영상을 이용하여 바람산출모델 CMOD5를 통해 해상풍 값을 산출하였다. CMOD5는 현재까지 산란계(Scatterometer)와 ERS SAR 위성을 이용해 해상풍을 산출할 때 가장 많이 사용되어오던 CMOD4 모델을 개선한 모델로써 특히 고풍속일 때의 결과에서 많은 개선을 보였다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제15권1호
• /
• pp.1-8
• /
• 2010

Cometabolic air sparging (CAS) is a new and innovative technology that uses air sparging principles but attempts to optimize in situ contaminant degradation by adding a growth substrate to saturated zone. CAS relies on the degradation of the primary growth substrate and cometabolic substrate transformation in the saturated zone and in the vadose zone for volatilized contaminants. In this study, we have investigated to determine MTBE degradation pattern and microbial activity variation if using propane as a primary substrate at the condition of considering air injection rate and air injection pattern. Laboratory-scale two-dimentional aquifer physical model studies were used and the experimental results were represented that the optimal conditions were as air injection rate of 1,000 mL/min and pulsed air injection pattern (15 min on/off). Over 1,000 mL/min air injection rate and continuous air injection pattern was no affected to increase DO concentration. On the other hand, Injection of propane and propane-utilizing bacteria degraded MTBE partially. And also, injection of propane- and MTBE-utilizing bacteria effectively degraded MTBE and TBA production was observed.

• 한국방재학회 논문집
• /
• 제1권2호
• /
• pp.93-101
• /
• 2001

본 연구에서는 계절에 따른 온도 변화를 고려한 건조수축의 예측모델을 제시하여, 실제구조물에서의 계절에 따른 온도변화에 대한 장기 거동 특성을 보다 향상된 방법으로 파악할 수 있는 방법을 제시하였다. 본 연구에서 사용된 건조수축 보정계수식은 계절에 따른 온도변화를 포함한 건조수축의 실제 실험적 데이터들을 사용하여 제안되었으며, FCM 교량의 장기 거동 조사는 현장에서 건조수축의 수치해석 결과를 적용할 수 있는지 없는지를 결정하기 위해 수행되었다. 본 연구에서 채택된 수치해석 방법은 실제 변형율과 차이가 발생하는 일반적인 방법과는 달리 실제 구조물의 거동특성을 매우 유사하게 모사할 수 있는 것으로 나타났다. 결과적으로 본 연구에서 제안된 방법은 FCM 교량의 장기 처짐에 대한 예측을 향상 시킬 것이다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.916-923
• /
• 2005

In this study, to observe aging effect of undrained shear behavior for Nak-Dong River sand, undrained static and cyclic triaxial tests were performed with changing relative density ($D_r$), consolidation stress ratio($K_c$) and consolidation time. As a result of the test, the modulus of elasticity to all samples estimated within elastic zone by the micro strain of about 0.05% in case of static shear behavior increased with the lapse of consolidation time significantly, so aging effect was shown largely. Also strength of phase transformation point(S_{PT}$) and strength of critical stress ratio point($S_{CSR}$) increased with the lapse of consolidation time. Undrained cyclic shear strength($R_f$) obtained from the failure strain 5% increased in proportion to relative density($D_r$) and initial static shear stress($q_{st}$), $R_f$ of consolidated sample for 1,000 minutes increased about 10.6% compared to that for 10 minutes at the loose sand, and $R_f$ increased about 7.0% at the medium sand. In situ application range of $R_f$ to the magnitude of earthquake for Nak-Dong River sand was proposed by using a increasing rate of $R_f$ as being aging effect shown from this test result.

• Smart Structures and Systems
• /
• 제23권4호
• /
• pp.359-371
• /
• 2019

As part of a structural health monitoring system, the relative geometric relationship between a ship and bridge has been recognized as important for bridge authorities and ship owners to avoid ship-bridge collision. This study proposes a novel computer vision method for the real-time geometric parameter identification of moving ships based on a single shot multibox detector (SSD) by using transfer learning techniques and monocular vision. The identification framework consists of ship detection (coarse scale) and geometric parameter calculation (fine scale) modules. For the ship detection, the SSD, which is a deep learning algorithm, was employed and fine-tuned by ship image samples downloaded from the Internet to obtain the rectangle regions of interest in the coarse scale. Subsequently, for the geometric parameter calculation, an accurate ship contour is created using morphological operations within the saturation channel in hue, saturation, and value color space. Furthermore, a local coordinate system was constructed using projective geometry transformation to calculate the geometric parameters of ships, such as width, length, height, localization, and velocity. The application of the proposed method to in situ video images, obtained from cameras set on the girder of the Wuhan Yangtze River Bridge above the shipping channel, confirmed the efficiency, accuracy, and effectiveness of the proposed method.

• 수산해양기술연구
• /
• 제36권3호
• /
• pp.186-194
• /
• 2000

계획어군심지기를 이용하여 자원량을 추정할 경우 해저검출은 매우 중요한 요소이다. 특히 어군이 해저에 가까이 분포하면 할수록, 해저와 어군을 분리하여 책분하는 것은 자원량의 추정정도의 신뢰도를 좌우하게 한다. 본 연구에서는 종래의 해저검출법을 보완하기 위해, 새로운 해저검출법을 개발하여, 그 유효성에 대하여 고찰하였으며, 다음과 같은 결과를 얻었다. 1) 에코레벨의 최대변화점을 이용하여 해저검출을 행한 경우 고정도로, 나아가 레벨 변동과 무관하여 안정한 해저검출법으로서 유효하다. 2) 전압최대변화율법에 의하면, 해저 오프셋는 해저검출위치로부터 0.45m이내에서 설정가능하고, 펄스파형, 해저지형과 음향 빔 등에 의존하여 결정된다.