• 한국전산유체공학회:학술대회논문집
• /
• 2007.10a
• /
• pp.73-76
• /
• 2007

The present paper describes the results of performance analysis for UH-60A rotor blade in hover. For the numerical simulations, commercial CFD software, FLUENT was used with Spalart-Allmaras turbulence model. The flow solver was based on node based scheme and second order spatial accuracy options was used for simulations. For the enhancement of wake capturing capability, high resolution grid was used around tip vortex region. Granting that somewhat over prediction of thrust was observed near blade tip region, performance was well correlated with experimental data within 3% accuracy in the operating region. Finally it was shown that the present flow solver can be used for preliminary performance analysis tool for hovering helicopter rotor blades.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.637-640
• /
• 2004

Structural damping enhancement of composite flexures and aeroelastic stability of a hingeless rotor system are investigated. Constrained layer damping (CLD) treatments are applied in order to increase structural damping of flexures. Material damping property of viscoelastic layer is modelled as complex modulus. Modal analysis of composite flexures with attached viscoelastic layers and constraining layers are performed using MSC/NASTRAN and the effects of CLD treatments are verified with the modal test results. The composite flexures with CLD are applied to a 4-bladed, 2-meter diameter, Froude-scaled, soft-in-plane hingeless rotor system. The aeroelastic stability is tested at hovering condition and the effects of CLD are investigated. It is shown that the CLD treatment effectively enhance the aeroelastic stability at hover.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.85.6-85
• /
• 2001

This paper describes a 3-DOF attitude control of a small model helicopter in hover through explicit decoupling and adaptive control scheme. A model helicopter mounted on gimbal-stand is considered as a system that has 3 independent SISO systems representing motions about roll, pitch and yaw axis and these subsystems are identified from the test flight data. In this consideration, the contribution of others to yaw channel is neglected since it is relatively small. Two PID controllers based on Ziegler-Nichols method are designed for roll pitch channels independently. Also, adaptive fuzzy tuner is designed and applied to those PID controllers to cope with coupling effects between each channel and system uncertainties due to variation of engine RPM. The experimental results show that the attitude control ...

• International Journal of Aeronautical and Space Sciences
• /
• v.10 no.1
• /
• pp.20-29
• /
• 2009

There are concerns about the influence of the gust wind caused by helicopters affecting the moving vehicles while hovering over the road during rescue activities. For the understanding of such complicated flow. numerical simulation of a rotor hovering above the ground has been carried out, changing the rotor/ground clearances. The rotor thrust is kept constant. and the rotor control is determined by trim adjustments incorporated into the CFD algorithm. Collective pitch angle and the required power decreases with the rotor/ground clearance which agrees with experience. Changes of the flowfield near the rotor with regard to the rotor height are investigated based on the calculated results.

• Journal of computational fluids engineering
• /
• v.17 no.2
• /
• pp.78-84
• /
• 2012

Numerical calculations were performed to investigate the influence in aerodynamic characteristics of a rotor system by surrounding structures and the ground effect for the rotor blade on a whirl tower is also investigated. Three dimensional Navier-Stokes simulations were carried out by using unstructured overset mesh technique and parallel computation. The calculated hover performance showed good agreement with the experimental result and showed that the structures around the whirl tower did not affect the aerodynamic characteristics of the blade. The ground effect was studied by comparing with the numerical result for the out of ground condition and the result of an analytic model.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.4
• /
• pp.361-370
• /
• 1992

A controller of the hovering VTOL aircraft with four fan is constructed by SRFIMF(State Rate Feedback Implicit Model-Following)theory, in which feedback state are angle acceleration, angle velocity and angle position of the aircraft during hover With yaw control of the system, characteristics of the hovering aircraft can be analyzed by changing states feedback gain and sponse provides robust stable hovering system.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.415-421
• /
• 2006

The unsteady flow calculation around the proprotor of Smart UAV was conducted. Using the flight scenario of SUAV which composed of hover, transition, and airplane mode, the aerodynamic analysis of proprotor were performed for the variation of collective pitch, rpm, forward speed, and tilt angle. The unsteady compressible Navier-Stokes equations were used for the calculation and the dynamic overset grid technique was applied for the rotating proprotor. The aerodynamic performance of proprotor calculated in this way were validated by comparing with the performance data obtained from the blade element momentum method.

• 한국전산유체공학회:학술대회논문집
• /
• 2007.04a
• /
• pp.8-13
• /
• 2007

Unsteady flow simulation for the tiltrotor Smart UAV configuration was performed to investigate the powered rotor wake effect on aerodynamic characteristics. Calculations were performed to simulate various flow conditions based on different flight modes including hover, conversion and cruise. Three-dimensional compressible Navier-Stokes equation code were used for flow calculation and Chimera grid technique overlapping individually generated grids was employed. A dynamic grid method was adopted in simulation of the rotating blades. Flow calculations were also conducted for the un-powered case. Aerodynamic interaction between the rotor and airframe was investigated comparing three data sets from the un-powered, powered, and isolated rotor cases.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2470-2472
• /
• 2001

This paper describes the application of a fuzzy-tuning PID controller to a 3-DOF attitude control of a small model helicopter in hover for the compensation of coupling effects between each axis and system uncertainties due to the variation of engine RPM. A Low-level PID controller is designed by Ziegler-Nichols method and its gains are tuned by a high-level fuzzy system based on error states and its time derivatives. The experimental results show that the attitude control performance of fuzzy-tuning PID controller is improved comparing with that of a Ziegler-Nichols PID controller and fuzzy controller.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.5
• /
• pp.941-949
• /
• 2010

The present study investigated the swimming pattern and appendage postures of a copepod species, Calanus sinicus, which prevails in the south-east sea of the Korean peninsula, by employing a digital holographic particle tracking velocimetry(PTV) technique. The results showed that the copepod Calanus sinicus had various swimming patterns such as hover, hop, sink, cruise, and downward cruise. Most frequent pattern was the 'hop and sink'. The average swimming speeds ranged from 1.1 to 45.7 body-lengths/s, and the corresponding flow Reynolds number ranged from $10^0$ to $10^2$.