• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.286-293
• /
• 2007

• 한국해안·해양공학회논문집
• /
• 제32권3호
• /
• pp.180-201
• /
• 2020

유한길이의 혼성방파제 선단에서 발생되는 회절파의 영향으로 방파제 길이를 따라 중복파고가 변동하고, 이로 인하여 케이슨에 작용하는 파압이 공간적으로 변동하며, 또한 케이슨의 활동거리가 상이한 사행피해가 발생한다는 것은 잘 알려져 있다. 제체에 작용파력의 공간적인 변동은 2차원적인 실험이나 수치해석으로서는 접근될 수 없는 문제이다. 본 연구는 olaFlow 모델을 적용하여 고천단의 사석마운드 상에 놓인 케이슨의 선단 주변에서 회절파의 발생과 배후역으로의 영향 및 제체에 작용하는 충격쇄파압을 포함한 파압의 공간적인 변동 등을 2차원 및 3차원수치기법으로 접근한다. 또한, 수치해석에서는 혼성방파제 주변에서 평균파고, 평균수평유속 및 평균난류운동에너지의 변동특성을 면밀히 분석·검토한다. 이로부터 동일한 입사파랑에 대해 케이슨에 작용하는 파압분포가 방파제의 길이에 따라 크게 변동하며, 2차원수치해석에서는 발생되지 않았든 충격쇄파압이 3차원수치해석에서는 발생되는 경우가 나타나고, 충격쇄파압의 발생 시 경우에 따라 기존의 설계조건보다 매우 큰 파압이 정수면 근방의 케이슨 전면 벽체에 작용되는 등의 중요한 결과를 확인할 수 있었다.

• 한국해안·해양공학회논문집
• /
• 제32권6호
• /
• pp.531-552
• /
• 2020

선행연구에서는 3차원규칙파에 대해 olaFlow 수치모델을 적용하여 혼성방파제의 선단 주변에서 파랑특성 및 케이슨에 작용하는 파압특성을 검토하였다. 본 연구에서는 동일한 수치모델과 혼성방파제의 배치 및 형상을 적용하여 일방향불규칙파의 작용 하에 고천단의 마운드 상에 놓인 케이슨의 선단 주변에서 회절파의 발생과 배후역으로의 영향 및 케이슨에 작용하는 충격쇄파압을 포함한 파압의 공간적인 변동 등을 2차원 및 3차원적으로 검토한다. 또한, 수치해석으로부터 혼성방파제 주변에서 주파수스펙트럼, 평균유의파고, 평균수평유속 및 평균난류운동에너지의 변동특성도 면밀히 분석·검토한다. 이로부터 2차원수치해석에서는 발생되지 않았던 충격쇄파압이 3차원수치해석에서는 발생되는 경우가 나타나고, 충격쇄파압의 발생 시 경우에 따라 기존의 설계조건보다 매우 큰 파압이 정수면 근방의 케이슨의 전면 벽체에 작용되는 등의 중요한 결과를 얻을 수 있었다. 또한, 동일한 입사유의파랑에 대해 케이슨에 작용하는 파압분포가 방파제의 길이에 따라 변동하는 것을 확인할 수 있었으며, 이러한 변동은 크기에서 차이를 나타내지만, 3차원규칙파에 대한 선행연구의 경우와 유사한 특성을 갖는다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.599-604
• /
• 2000

In order to study unsteady aerodynamic loads on high speed trains passing by each other at the speed of 350km/h, three-dimensional flow fields around trains during the crossing event are numerically simulated using the three-dimensional Euler equations. The Roe's FDS with MUSCL interpolation is employed to simulate wave phenomena properly. An efficient moving grid system based on domain decomposition techniques is developed to analyze the unsteady flow field induced by the restricted motion of a train on a rail. The numerical simulations of the trains passing by on the double-track are carried out to study the effect of the train nose-shape, the train length and the existence of tunnel when the crossing event occur. Unsteady aerodynamic loads side force and drag force-acting on the train during the crossing are numerically predicted and anlayzed. It is found that the strength of the side force mainly depends on the nose-shape, and that of drag force on tunnel existence. And it is observed that the push-pull like impulsive force successively acts on each car and acts in different directions between the neighborhood cars. The maximum change of the impulsive force reaches about 3 tons. These aerodynamic force data are absolutely necessary for the evaluation of the stability of the high speed multi-car train. The results also indicate the effectiveness of the present numerical method for the simulation of unsteady flow field induced by the bodies in the relative motion.

• 한국해안해양공학회지
• /
• 제7권1호
• /
• pp.108-115
• /
• 1995

본 논문에서는 충격파력을 받는 케이슨 방파제의 동적거동해석 모델에 대해서 연구하였다. 케이슨 구조는 강체로 가정하였으며, 기초사석 및 지반은 반무한탄성지반이론에 의거하여 가상 부가질량, 스프링 및 감쇠계수로 이상화하였다. 주파수 의존 유체의 부가질량 및 감쇠계수는 시간기억함수와 무한대 주파수에 대한 부가질량으로 나타내었다. 또한, 케이슨의 영구적 활동을 모의하기 위하여 수평방향의 스프링을 형성거동을 하는 비선형 스프링으로 모형화하였다. 수리실험치와 비교결과, 본 모델은 상당히 좋은 결과를 줌을 알 수 있었다. 케이슨의 동적 거동에 영향을 주는 주요 인자의 변화에 따른 민감도 해석을 수행하였으며, 케이슨의 영구적 활동거리 및 한계중량 예측에의 적용성조사를 위한 수치실험도 병행하였다.

• Structural Engineering and Mechanics
• /
• 제50권3호
• /
• pp.287-304
• /
• 2014

A computer based iterative numerical procedure has been developed to analyse reinforced high strength concrete columns subjected to horizontal wave loads and eccentric vertical load by taking the material, geometrical and wave load non-linearity into account. The behaviour of the column has been assumed, to be represented by Moment-Thrust-Curvature relationship of the column cross-section. The formulated computer program predicts horizontal load versus deflection behaviour of a column up to failure. The developed numerical model has been applied to analyse several column specimens of various slenderness, structural properties and axial load ratios, tested by other researchers. The predicted values are having a better agreement with experimental results. A simplified user friendly hydrodynamic load model has been developed based on Morison equation supplemented with a wave slap term to predict the high frequency non-linear impulsive hydrodynamic loads arising from steep waves, known as ringing loads. A computer program has been formulated based on the model to obtain the wave loads and non-dimensional wave load coefficients for all discretised nodes, along the length of column from instantaneous free water surface to bottom of the column at mud level. The columns of same size and material properties but having different slenderness ratio are analysed by the developed numerical procedure for the simulated wave loads under various vertical thrust. This paper discusses the results obtained in detail and effect of slenderness in resisting wave loads under various vertical thrust.

• 대한기계학회논문집B
• /
• 제21권9호
• /
• pp.1139-1148
• /
• 1997

Compression waves propagating in a high-speed railway tunnel develops large pressure fluctuations on the train body or tunnel structures. The pressure fluctuations would cause an ear discomfort for the passengers and increase the aerodynamic resistance of trains. As a fundamental research to resolve the pressure wave phenomenon in the tunnel, experiments were carried out by using a shock tube with an open end. A blockage to model trains inside the tunnel was installed on the lower wall of shock tube, thus forming a sudden cross-sectional area reduction. The compression waves were obtained by the fast opening gate valve instead of a conventional diaphragm of shock tube and measured by the flush mounted pressure transducers with a high sensitivity. The experimental results were compared with the previous theoretical analyses. The results show that the ratio of the reflected to the incident compression wave at the sudden cross-sectional area reduction increases but the ratio of the passing to the incident compression wave decreases, as the incident compression wave becomes stronger. This experimental results are in good agreements with the previous theoretical ones. The maximum pressure gradient of the compression wave abruptly increases but the width of the wave front does not vary, as it passes over the sudden cross-sectional area reduction.

• International Journal of Safety
• /
• 제1권1호
• /
• pp.7-12
• /
• 2002

This paper demonstrates the impact stresses and wave propagation characteristics of glass/epoxy laminates subjected to the low-velocity impact by a steel ball theoretically and experimentally. A plate finite element model in conjunction with experimental contact laws is used for the theoretical investigation. The specimens for statical indentation and impact test are composed of $[0/45/0/-45/0]_28 and [90/45/90/-45/90]_28$ stacking sequences and have clamped-simply supported boundary conditions. Finally, these two results are compared and then the impulsive stress and wave propagation characteristics of this laminated composite are studied.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.144-151
• /
• 2006

Sound generated from a moving vehicle often carries information on the condition of vehicle, for example, whether it has faults or not, where the fault exists. The latter is possible especially by MFAH(moving frame acoustic holography) and beamforming method. MFAH is applicable to the sound source of pure tone or narrow band noise. For the beamforming method, we have to know what kind of wave the sound source radiates, for example, plane wave or spherical wave. That is, whether the above methods are applicable depends on the characteristics of sound source. To apply these methods to the fault detection, we have to know the characteristics of wave from faults. In this research, a machine diagnosis technique based on the above holographic approaches is introduced to find the position of faults. The signal due to faults is modeled based on the fact that the faults radiate impulsive noise, and analyzed in time and frequency domain. The way how MFAH and beamforming method can be used is introduced to find the position of source.

• 대한기계학회논문집B
• /
• 제21권1호
• /
• pp.89-98
• /
• 1997

Compression waves propagating in a high speed railway tunnel impose large pressure fluctuations on the train body or tunnel structures. The pressure fluctuations can cause ear discomfort for the passengers and increase the aerodynamic resistance of trains. As a fundamental research to resolve the pressure wave phenomenon in the tunnel, a steady theory of Chester-Chisnell- Whitham was applied to a simple shock tube with a sudden cross-sectional area reduction to model trains inside the tunnel. The results of the present theoretical analysis were compared with the experiments of the shock tube. The results show that the reflected compression wave from the model becomes stronger as the strength of incident compression wave and the blockage ratio increase. However, the compression wave passing through the model is not strongly dependent on the blockage ratio. The theoretical results are in good agreement with the experiments.