• The Journal of the Acoustical Society of Korea
• /
• 제13권2E호
• /
• pp.5-13
• /
• 1994

능동소나에서 표적에 의해 산란된 표적신호를 합성하기 위해서는 반사점(Highlight, 이하 HL)에서의 산란현상의 이해가 선행되어야 한다. 본 논문에서는 음향수조실험에서 얻어진 자료를 분석하여 표적신호를 특징지우고, HL 모델의 기본 가정의 타당성을 검토한다. 수조실험결과는 산란신호가 시간영역에서 신장되고, 도플러효과가 나타나며, 표적의 내부 구조형상이 표적산한신호에 직접반사 이상의 영향을 미침을 보여준다. 이는 표적산란 신호의 합성에 있어서 사용되는 충격응답 또는 그린 함수(Green's function)가 단순한 델타함수가 아닌 필터역할을 하도록 시뮬레이션해야 함을 보여 준다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.725-728
• /
• 2002

In this Paper, a mathematical model describing the dynamics of pilot operated pressure control valve was derived. A attempt to analyze the Parameters(seat diameter, cone angle, spring stiffness, control volume) which relate to the performance of the object valve was carried out. Simulation using AMESim as a simulation tool was operated, and verified the validity of our simulation by means of comparison our simulation results with an experimental results of the pilot operated pressure control valve.

• 대한전자공학회논문지
• /
• 제23권4호
• /
• pp.571-577
• /
• 1986

In this paper, we have investigated pole-zero shifting due to variable stopband frequency Ws and passband ripple Ap of elliptic function filters. Also we have studied the phase, group-delay, unit step response and impulse response of elliptic filters. We show that in the passband the phase linearity improves as Ws increases, and eventually it approaches that of a chebyshev function filter.

• 소음진동
• /
• 제10권5호
• /
• pp.800-805
• /
• 2000

To determine the modal matrix and modal frequency of engine mount system, we most solve so-called eigen-value problem. However eigen-value problem of engine mount system with hydraulic mount can not be solved by general eigne-analysis algorithm because the properties of hydraulic mount vary with frequency. so in this paper the method for modal analysis of rigid body motions of an engine supported by hydraulic mount is proposed. Natural frequencies and mode shapes of this nonlinear system are obtained by using complex exponential method and Laplace transformation method. In time domain, impulse response functions are calculated by (two-sided) discrete inverse Fourier Transformation of forced frequency response functions achieved by Laplace transformation of the differential equation of motion. Considering the fact that frequency response functions synthesized by modal parameters form proposed method are in good agreement with original FRFs, it is proved that the proposed method is very efficient and useful for the analysis of eigne-value problem of hydraulic engine mount system.

• Smart Structures and Systems
• /
• 제20권4호
• /
• pp.473-481
• /
• 2017

This study suggests a simple, convenient and non-destructive method for investigation of the Young's modulus detection in stepped shafts which only utilizes the first-order resonant frequency in flexural mode and dimensions of structures. The method is based on the impulse excitation technique (IET) to pick up the fundamental resonant frequencies. The standard Young's modulus detection formulas for rectangular and circular cross-sections are well investigated in literatures. However, the Young's modulus of stepped shafts can not be directly detected using the formula for a beam with rectangular or circular cross-section. A response surface method (RSM) is introduced to design numerical simulation experiments to build up experimental formula to detect Young's modulus of stepped shafts. The numerical simulation performed by finite element method (FEM) to obtain enough simulation data for RSM analysis. After analysis and calculation, the relationship of flexural resonant frequencies, dimensions of stepped shafts and Young's modulus is obtained. Numerical simulations and experimental investigations show that the IET method can be used to investigate Young's modulus in stepped shafts, and the FEM simulation and RSM based IET formula proposed in this paper is applicable to calculate the Young's modulus in stepped shaft. The method can be further developed to detect mechanical parameters of more complicated structures using the combination of FEM simulation and RSM.

• 지식경영연구
• /
• 제19권2호
• /
• pp.1-19
• /
• 2018

This study aims to identify the causal relationship among public technology transfer, technological performance, and research and development (R&D) productivity. Using the impulse-response function(IRF) of a panel vector autoregressive model (panel VAR), this study suggests the results of how long the factors such as technological performance (patent), public technology transfer, and R&D productivity takes and lasts if a one-unit shock of standard deviation occurs. As a result, first, the increase of public technology transfer activities has no power to increase the technology performance but improve the R&D productivity. If the public institute increases its technology transfer activities by one unit, the R&D productivity will increase within five years. Second, the impact of increasing technological performance on improvement of public technology transfer and R&D productivity is an insignificant. Third, the effect of R&D productivity on the public technology transfer creates a substantial reaction after a current time. Considering the structural relationships among public technology transfer, technological performance, and R&D productivity, if policy makers intend to construct the active R&D circumstance, technology suppliers should be motivated to run the active R&D mechanism because they achieve gains.

• 대한조선학회논문집
• /
• 제52권3호
• /
• pp.187-197
• /
• 2015

This study aims the development of a semi-analytic method for the parametric roll of large containerships advancing in longitudinal waves. A 1.5 Degree-of-Freedom(DOF) model is proposed to account the change of transverse stability induced by wave elevations and vertical motions (heave and pitch). By approximating the nonlinearity of restoring moment at large heel angles, the magnitude of roll amplitude is predicted as well as susceptibility check for parametric roll occurrence. In order to increase the accuracy of the prediction, the relationship between righting arm(GZ) and metacentric height(GM) is examined in the presence of incident waves, and then a new formula is proposed. Based on the linear approximation of the mean and first harmonic component of GM, the equation of parametric roll in irregular wave excitations is introduced, and the computational results of the proposed model are validated by comparing those of weakly nonlinear simulation based on an impulse-response-function method combined with strip theory. The present semi-analytic doesn’ t require heavy computational effort, so that it is very efficient particularly when numerous sea conditions for the analysis of parametric roll should be considered.

• 수산경영론집
• /
• 제44권2호
• /
• pp.101-109
• /
• 2013

This study is aimed to analyze investment effects of fisheries R&D projects of the National Fisheries Research and Development Institute(NFRDI). In the analysis, Granger causal relations between R&D investment and fisheries production are tested. In addition, time-lag effects of fisheries R&D investment are estimated with an impulse response analysis and investment effects of R&D projects are estimated by changes of social surplus. Results indicate that there exists an Granger-causality between R&D investment and fisheries production and fisheries production responds to the fisheries R&D shock about three years after the initial shock. The magnitudes of the impacts increase until a peak is reached 5~7 years and the impacts decline to zero after 25 years. As investment effects, it is shown that the internal rate of returns of fisheries R&D investment is 55.2%.

• 한국전자파학회논문지
• /
• 제10권7호
• /
• pp.1085-1094
• /
• 1999

유럽의 GSM에서는 시간 분할 다중 접속(TDMA) 프레임에 정보 선호와 함께 한 프레임당 페이딩 채널의 임펄스 응답 측정과 학습 구간 동안의 등화기의 빠른 수렴을 목적으로 한 16비트 길이의 프리앵블을 사용하고 있다. 이러한 전송 프리엠블과 수선기에 저장된 프리엠블에 일정 조건을 만족하는 동일한 이진 부호를 전송하여 등화기의 랩 계수(tap coefficients)를 빠르게 수렴시키고, 그 상호 상관 함수를 구함으로써 임펄스 응답을 측정한다. 본 논문에서는 기존의 의사 잡음 부호를 이용하는 방식과는 달리 0번 자리 이동(shift)일 때와 반 주기만큼의 자리 이동일 때 상관 값을 가지고, 나머지 자리 이동에서는 O값인 특정 자기 상관 함수를 가지는 이진 부호를 이용한 정확한 임펄스 응답 측정과 초기 빠른 수렴 속도를 지니는 등화기(equalizer) 구현의 수학적 접근과 기존의 의사 잡음 부호를 학습 시권스로 이용한 경우와의 수렴 속도 비교, 그리고 임펄 스 응답 측정이 논의된다.

• 한국정보기술학회논문지
• /
• 제16권11호
• /
• pp.97-103
• /
• 2018

본 논문에서는 시변 최적 FIR 필터를 이용한 전력 신호의 고조파 검출 방법을 제안한다. 잡음이 고려된 전력 신호에 대해 고조파의 진폭과 위상각의 변화량이 확률적 정보로 고려된 시변 상태 방정식 모델에 대해 시변 최적 FIR 필터를 설계하여 고조파 성분을 검출한다. 제안한 검출 방법에 사용된 시변 FIR 필터는 유한 구간의 정보만을 사용하고 어떠한 초기 조건도 사용하지 않도록 설계되어 칼만 필터 기반의 검출 방법의 오차 누적에 따른 검출 성능 저하나 발산 문제를 해결할 수 있다. 또한 FIR 구조의 필터 사용을 통해 칼만 필터 대비 불확실성에 대해 보다 강인한 검출이 가능하다. 시변 최적 FIR 필터의 사용을 통해 시불변 최적 FIR 필터 기반 고조파 검출 방법 대비 보다 일반적인 해를 제공한다. 제안하는 검출 방법의 우수성을 검증하기 위해 시변 칼만 필터 및 적응 칼만 필터 기반 고조파 검출 방법과의 비교 시뮬레이션을 수행한다.