• 한국안전학회지
• /
• 제28권3호
• /
• pp.51-55
• /
• 2013

The purpose of this study is to find the causes of malfunctions and defective operation of printed circuit boards(PCBs) built into home refrigerators to perform power saving functions. This study performed an electrostatic test of a PCB built-in using an Auto Triggering system; lightning and impulse tests using an LSS-15AX; and an impulse test using an INS-400AX. From the analysis of a secondarily developed product, it was found that electrostatic discharge(ESD) caused more malfunctions and defective operations than electric overstress(EOS) due to overvoltage. As a result of increasing the condenser capacity of the PCB circuit, withstanding voltage was increased to 7.4 kV. In addition, this study changed the power saving mode and connected a varistor to the #2 pin of an IC chip. As a result, the system consisting of all specimens of a finally developed product was operated stably with an applied voltage of less than 10 kV. This study found it necessary to perform quality control at the manufacturing stage in order to reduce the occurrence of electrostatic accidents to IC chips built into a PCB.

• 유통과학연구
• /
• 제11권10호
• /
• pp.63-72
• /
• 2013

Purpose - This study analyzes the relationship and dynamic interactions between stock price index, interest rate, price index, and housing price indices using Korean monthly data from 2000 to 2013, based on a VAR model. This study also examines Granger causal relationships among these variables in order to determine whether the time series of one is useful in forecasting another, or to infer certain types of causal dependency between stochastic variables. Research design, data, and methodology - We used Korean monthly data for all variables from 2000: M1 to 2013: M3. First, we checked the correlations among different variables. Second, we conducted the Augmented Dickey-Fuller (ADF) test and the co-integration test using the VAR model. Third, we employed Granger Causality tests to quantify the causal effect from time series observations. Fourth, we used the impulse response function and variance decomposition based on the VAR model to examine the dynamic relationships among the variables. Results - First, stock price Granger affects interest rate and all housing price indices. Price index Granger, in turn, affects the stock price and six metropolitan housing price indices. However, none of the Granger variables affect the price index. Therefore, it is the stock markets (and not the housing market) that affects the housing prices. Second, the impulse response tests show that maximum influence on stock price is its own, and though it is influenced a little by interest rate, price index affects it negatively. One standard deviation (S.D.) shock to stock price increases the housing price by 0.08 units after two months, whereas an impulse shock to the interest rate negatively impacts the housing price. Third, the variance decomposition results report that the shock to the stock price accounts for 96% of the variation in the stock price, and the shock to the price index accounts for 2.8% after two periods. In contrast, the shock to the interest rate accounts for 80% of the variation in the interest rate after ten periods; the shock to the stock price accounts for 19% of the variation; however, shock to the price index does not affect the interest rate. The housing price index in 10 periods is explained up to 96.7% by itself, 2.62% by stock price, 0.68% by price index, and 0.04% by interest rate. Therefore, the housing market is explained most by its own variation, whereas the interest rate has little impact on housing price. Conclusions - The results of the study elucidate the relationship and dynamic interactions among stock price index, interest rate, price index, and housing price indices using VAR model. This study could help form the basis for more appropriate economic policies in the future. As the housing market is very important in Korean economy, any changes in house price affect the other markets, thereby resulting in a shock to the entire economy. Therefore, the analysis on the dynamic relationships between the housing market and economic variables will help with the decision making regarding the housing market policy.

• 수산해양교육연구
• /
• 제28권1호
• /
• pp.198-210
• /
• 2016

This study firstly aims to estimate a leading-price of Jeju flounders with various price-classes by fish weight and secondly plans to provide policy implications of flounder purchase projects by understanding dynamic changes and interactions among flounder producer price-classes caused by price impulses in the market. This study applies an unit root test for stability of data, uses a Granger causality test to estimate the leading-price among producer prices by fish weight, employs the vector autoregressive model to analyze statistical impacts among t-1 variables used in models, and finally utilizes impulse response analyses and forecast error variance decomposition analyses to understand dynamic changes and interactions among change rates of the producer prices caused by price impulses in the market. The results of the study are as follows. Firstly, KPSS, PP, and ADF tests show that the change rate of Jeju flounder monthly producer prices by fish weight differentiated by logarithm is stable. Secondly, the Granger causality test presents that the change rate of the 1kg flounder producer price strongly leads it of 500g, 700g, and 2kg flounder producer prices respectively. Thirdly, the vector autoregressive model indicates that the change rate of the 1kg producer price in t-1 period statistically, significantly influences it of own weight in t period and also slightly affects price change rates of other weights in t period. Fourthly, the impulse response analysis indicates that impulse responses of structural shocks for the change rate of the 1kg producer price are relatively more powerful in its own weight and in other weights than shocks emanating from price change rates of other weights. Fifthly, the variance decomposition analysis points out that the change rate of the 1kg producer price is relatively more influential than it of 500g, 700g, and 2kg producer prices respectively. In conclusion, the change rate of the 1kg Jeju flounder producer price leads the change rates of other ones and Jeju purchase projects need to be targeted to the 1kg Jeju flounder producer price as the purchase project implemented in 2014.

• Smart Structures and Systems
• /
• 제9권3호
• /
• pp.207-230
• /
• 2012

Full-scale shake table seismic experiments and low-amplitude vibration tests on a masonry building are carried out to assess its seismic performance as well as study the effectiveness of a new multifunctional textile material for retrofitting masonry structures against earthquakes. The un-reinforced and the retrofitted with glass fiber reinforced polymer (GFRP) strips masonry building was subjected to a series of earthquake excitations of increasing magnitude in order to progressively induce various small, moderate and severe levels of damage to the masonry walls. The performance of the original and retrofitted building states is evaluated. Changes in the dynamic characteristics (lowest four modal frequencies and damping ratios) of the building are used to assess and quantify the damage states of the masonry walls. For this, the dynamic modal characteristics of the structure states after each earthquake event were estimated by performing low-amplitude impulse hammer and sine-sweep forced vibration tests. Comparisons between the modal results calculated using traditional accelerometers and those using Fiber Bragg Grating (FBG) sensors embedded in the reinforcing textile were carried on to investigate the reliability and accuracy of FBG sensors in tracking the dynamic behaviour of the building. The retrofitting actions restored the stiffness characteristics of the reinforced masonry structure to the levels of the original undamaged un-reinforced structure. The results show that despite a similar dynamic behavior identified, corresponding to reduction of the modal frequencies, the un-reinforced masonry building was severely damaged, while the reinforced masonry building was able to withstand, without visual damage, the induced strong seismic excitations. The applied GFRP reinforcement architecture for one storey buildings was experimentally proven reliable for the most severe earthquake accelerations. It was easily placed in a short time and it is a cost effective solution (covering only 20% of the external wall surfaces) when compared to the cost for full wall coverage by GFRPs.

• 아태비즈니스연구
• /
• 제8권2호
• /
• pp.15-30
• /
• 2017

This study analyzes the relationship between income inequality and economic growth. Gini coefficient (market income), the deciles income inequality index and per capita real GDP were analyzed. Furthermore, various cointegration tests were tried to improve the reliability of the test results. From the weak exogeniety test of between per capita real GDP and the Gini coefficient (market income), per capita real GDP has a weak exogeneity while the Gini coefficient is endogenous. From the various cointegration tests, we found out that there is a cointegration between Gini coefficient and per capita real GDP. Moreover, it is estimated that per capita real GDP has a positive effect on the Gini coefficient (market income). In the VAR Granger causal analysis, per capita real GDP affects the Gini coefficient (market income), but it is difficult to say that the Gini coefficient (market income) always has an effect on per capita real GDP. Also, the impulse-response function of the VAR model shows that per capita real GDP temporarily reduces the Gini coefficient (market income), and then increases it over time. Accordingly, it is necessary for the policies to improve not only the distribution structure but also income distribution through economic growth.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.611-616
• /
• 2004

In this study, microfabrication of a micro-arcjet nozzle with Fifth-harmonic generation Nd：YAG pulses (wavelength 213 nm) and its thrust performance tests were conducted. A micro-arcjet nozzle was machined in a 1.2 mm thick quartz plate. Sizes of the nozzle were 0.44 mm in width of the nozzle exit and constrictor diameter of 0.1 mm. For an anode, a thin film of Au (~100 nm thick) was deposited by DC discharge PVD in vacuum on divergent part of the nozzle. As for a cathode, an Au film was also coated on inner wall surface. In operational tests, a stable discharge was observed for mass flow of 1.0mg/sec, discharge current of 6 ㎃, discharge voltage of 600 V, or 3.6 W input power (specific power of 3.6 MW/kg). In this case, plenum pressure of the discharge chamber was 80 ㎪. With 3.6 W input power, thrust obtained was 1.4 mN giving specific impulse of 138 sec with thrust efficiency of 24 %.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1015-1017
• /
• 2003

In a research and development team of high temperature superconducting (HTS) transformer for power distribution, prior to manufacture a single phase 1MVA 22.9 kV/6.6 kV HTS transformer, a 1MVA transformer for insulation test with windings made of copper tapes with the same size as BSCCO-2223 HTS tape was manufactured. The test transformer was composed of both the copper windings of double pancake type and the shell type core of laminated silicon steel plates. The characteristics tests of the test transformer were performed, such as no load test, load test and short test at 77k using liquid nitrogen. Insulation tests, lightning impulse test, power-frequency voltage test and external insulation test, were accomplished also.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집 특별세미나,특별/일반세션
• /
• pp.641-646
• /
• 2009

Concrete tracks are superior to ballast tracks in the aspect of durability, maintenance and safety. However, deteriorated stiffness of railroad bed and settlement of soft ground induced by trapped or seepage water lead to problems in safety of train operation. In this research, characteristic stiffness of concrete tracks, which is determined from FRACTAL (Flexural-Rigidity Assessment of Concrete Tracks by Antisymmetric Lamb Waves) technique, was employed as an index of track displacement. The characteristic stiffness is defined using Poisson's ratio, moment of inertia and stiffness ratio of subgrade to slab. To verify validity and reliability of the proposed characteristic stiffness, experimental and theoretical researches were performed. Feasibility of the characteristic stiffness based on FRACTAL technique was proved at a real concrete track for Korean high-speed trains. Validity of the FRACTAL technique was also verified by comparing the results of impulse-response tests performed at the same measurement array and the results of SASW tests and DC resistivity survey performed at a shoulder nearby the track.

• Computers and Concrete
• /
• 제24권2호
• /
• pp.95-102
• /
• 2019

Current article proposes a cheap prototype of an embedded wireless sensor to monitor concrete structures. The prototype can measure temperature and relative humidity concurrently at a controlled through smartphone time interval. It implements a maturity method to estimate in-place concrete strength, which is considered as an alternative for traditional shock impulse method and compression tests used in Kazakhstan. The prototype was tested and adequately performed in the laboratory and field conditions. Tests aimed to study the effect of internal and ambient temperature and relative humidity on the concrete strength gain. According to test results revealed that all parameters influence the strength gain to some extent. For a better understanding of how strongly parameters influence the strength as well as each other, proposed a multicolored cross-correlation matrix technique. The technique is based on the determination coefficients. It is able to show the value of significance of correlation, its positivity or negativity, as well as the degree of inter-influence of parameters. The prototype testing also recognized the inconvenience of Bluetooth control due to weakness of signal and inability to access several prototypes simultaneously. Therefore, further improvement of the prototype presume to include the replacement of Bluetooth by Narrow Band IoT standard.

• Composites Research
• /
• 제22권4호
• /
• pp.27-32
• /
• 2009

본 연구에서는 충돌속도가 다르지만, 총 충돌에너지는 동일하게 유지한 상태에서 충돌을 가했을 때 발포 고분자의 응력-변형률 관계와 충돌에너지 흡수 특성에 관하여 고찰하였다. 이는 충돌시 관성과 변형률 속도에 변화를 주어 재료의 반응거동 및 특성을 파악하기 위함이다. 두가지 다른 밀도(64 $kg/m^3$, 89 $kg/m^3$)를 갖는 발포고분자시편에 대한 준정적시험과 충돌시험이 수행되었다. 또한 Sherwood-Frost 모델과 임펄스 모멘텀 이론의 두가지가 연성된 방정식을이용하여 발포고분자의 구성방정식으로 제안하였다.\ 제안된 구성방정식을 이용하여, 응력변형률 선도를 구하고, 충돌시험결과와 비교하여, 본 구성방정식이 우수하게 결과를 예측할 수 있는 것으로 나타났다.