• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.3C
• /
• pp.368-373
• /
• 2004

Extremely fine tine resolution of ultra-wideband (UWB) signal poses a new problems to the system designer. A reasonable accuracy of the system clock is necessary to process signals with such a high space resolution. A useful way of illustrating the time resolution of a signal is to evaluate the ambiguity function. The ambiguity function for carrierless UWB defined using the time mismatch and time scaling factor as its two parameters. The UWB ambiguity function is evaluated for various signaling schemes of impulse radio.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.11A
• /
• pp.1672-1681
• /
• 2000

초광대역 시간 도약 이전 임펄스 무전 전송 시스템의 성능 평가 1672 최근 들어 실내 무선 LAN(local area network)이나 군용 무선 통신 시스템을 위한 새로운 대역 확산 전송방식으로서 초광대역 시간 도약 임펄스 무선 전송(ultra wideband time hopping impulse radio; 이하 IR) 기술이 큰 관심을 모으고 있다. 신호 전송을 위해 연속적인 정현파를 이용하는 기존의 무선 전송 시스템과는 달리 IR 시스템은 1 nese 이하의 매우 짧은 펄스폭의 펄스 위치 변조(pulse position modulation)된 가우시안 모노사이클 멀스 열을 이용하므로서 매우 작은 크기의 수 GHz에 이르는 초광대역 스펙트럼을 가지며 기존의 통신 시스템에 거의 간섭을 미치지 않으며 사용 가능하다. 본 논문에서는 동기식 이진 (synchronous binary) IR 시스템의 성능 분석 및 평가 결과를 제시하고자 한다.이를 위해 의사 잡음 부호 발생기와 decimator로 구성된 시간 도약 패턴을 사용 하여 다원 접속 간섭 이 배제되는 동기식 이진 IR 시스템의 비트 오율에 대한 closed form 결과를 유도하고, 유도된 이론적인 성능 결과를 부가성 백색 가우시안 잡음 채널에 대한 모의 실험을 통해 확인하였다. 또한 모의 실험을 통해 상관 복조기에서 발행한 렌덤 타이밍 지터에 대해 IR 시스템의 강인한 특성을 확인하였다.

• ETRI Journal
• /
• v.32 no.3
• /
• pp.460-463
• /
• 2010

This letter proposes an energy-detection-based non-data-aided weighted non-coherent receiver (NDA-WNCR) scheme for impulse radio ultra-wideband (IR-UWB) pulse-position modulated signals. Compared to the conventional WNCR, the optimal weights of the proposed NDA-WNCR are tremendously simplified as the maximum eigenvector of the IR-UWB signal energy sample autocorrelation matrix. The NDA-WNCR serves to blindly obtain the optimal weights and entirely circumvent the transmission of training symbols or channel estimation in practice. Analysis and simulation results verify that the bit error rate (BER) performance of the NDA-WNCR closely approaches the ideal BER of the conventional WNCRs.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.3
• /
• pp.261-273
• /
• 2016

Reconfigurable finite impulse response (FIR) filters whose filter coefficients and filter order change dynamically during run-time play an important role in the software defined radio (SDR) systems, multi-channel filters, and digital up/down converters. However, there are not many reports on such reconfigurable designs which can support dynamic variation of filter order and filter coefficients. The purpose of this paper is to provide an architectural solution for the FIR filters to support run-time variation of the filter order and filter coefficients. First, two straightforward designs, namely, (i) single-MAC based design and (ii) full-parallel design are presented. For large variation of the filter order, two designs based on (iii) folded structure and (iv) fast FIR algorithm are presented. Finally, we propose (v) high throughput design which provides significant advantage in terms of hardware and/or time complexities over the other designs. We compare complexities of all the five structures, and provide the synthesis results for verification.

• Journal of Communications and Networks
• /
• v.1 no.3
• /
• pp.166-181
• /
• 1999

The object of this paper is to investigate the influence of antenna pattern on indoor radio channel characteristics. Different from previous works where this analysis was carried out at a fixed frequency using different antennas, in the present paper (where measurements were taken in a wide frequency range) the variation of the radiation pattern was caused by two factors: the change of the radiation pattern when the same antenna was used at different frequenicies and the use of different type of antennas. To carry out this analysis, frequency domain measurements of the indoor radio channel at 1 GHz, 5.5 GHz, 10 GHz and 18 GHz were collected. Measurements were taken using a network analyzer. Serveral re-alizations of the channel transfer function were obtained varying, for each measurement, the positon of the transmitter and keep-ing the receiver fixed. Estimate of the channel impulse response was obtained from the Inverse Fourier Transform (IFT) of the fre-quency response. The measurements were performed in an office enviroment with mostly metallic walls and inner separations. The obtained data were elaborated to obtain the power versus distance relationship, the Cummulative Distribution Functions(CDFs) of rms Delay Spread(DS) and of the 3 dB frequency correlation band-width. Finally, the 3 dB width of the frequency correlation func-tion has been empirically related to the inverse of the rms DS of the impulse response.

• ETRI Journal
• /
• v.38 no.4
• /
• pp.634-644
• /
• 2016

Channel-based radio-frequency fingerprinting such as a channel impulse response (CIR), channel transfer function (CTF), and frequency coherence function (FCF) have been recently proposed to improve the accuracy at the physical layer; however, their empirical performance, advantages, and limitations have not been well reported. This paper provides a comprehensive empirical performance evaluation of RF location fingerprinting, focusing on a comparison of received-signal strength, CIR-, CTF-, and FCF-based fingerprinting using the weighted k-nearest neighbor pattern recognition technique. Frequency domain channel measurements in the IEEE 802.11 band taken on a university campus were used to evaluate the accuracy of the fingerprinting types and their robustness to human-induced motion perturbations of the channel. The localization performance was analyzed, and the results are described using the spatial and temporal radio propagation characteristics. In particular, we introduce the coherence region to explain the spatial properties and investigate the impact of the Doppler spread in time-varying channels on the time coherence of RF fingerprint structures.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.5A
• /
• pp.494-499
• /
• 2008

In this study, a Software Defined Radio(SDR) technology-based digital filtering technique applicable to a multiple channel processing system such as a wireless mobile communication system using Code Division Multiple Access(CDMA) technology is proposed. The technique includes a micro-processor to redesign Finite Impulse Response(FIR) filter coefficients according to specific system information and to download the filter coefficients to one digital Band Pass Filter(BPF) to reconfigure another system. The feasibility of the algorithm is verified by implementing a multiple channel signal generator that is reconfigurable to other system profiles, including those for a CDMA system and a WCDMA system on identical hardware platform.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.9
• /
• pp.858-864
• /
• 2002

In this paper, Analyzed Performance of TH/UWB(Time Hopping/Ultra Wideband after Impulse Radio) system in interference environment by existing system that use same frequency band. In case interference fraction ratio is below 0.1, consider and analyzed in case influence through interference in IR system that is shared in 3.1 - 10.6 GHz band hereafter as case that use very small and narrow band than IR system such as 80 MHz bandwidth of ISM band or 802.1la's use bandwidth 20 MHz in 5 GHz band. According to result, we could know that Performance change according to possession band width of interference shows greatly than size of interference electric power. Also, interference fraction ratio is big (more than 0.1) narrowband interference in partial band interference environment, could get Performance improvement of big width increasing pulse repetition number. But, could know that do not influence hardly in system performance when interference fraction ratio is small (below 0.1) narrowband interference. Therefore, may receive the best system performance and transfer efficiency by set the most suitable pulse repetition number according to bandwidth fraction ratio of interference through correct interference fraction ratio estimation and apply proper interference suppression techniques.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.3
• /
• pp.19-26
• /
• 2008

We propose a selective detection scheme based on pulse repetition considering the BER (Bit Error Rate) performance and complexity of coherent IR-UWB (Impulse Radio-Ultra Wide Band) systems. To take system complexity into account, the proposed scheme transmits the UWB signals by pulse repetition at the transmitter, like conventional PRC (Pulse Repetition Coding). However, to effectively improve BER performance of the system, the proposed scheme performs selective detection by estimating the SNR (Signal-to-Noise Ratio) of the received pulse-repeated signal at the UWB receiver. Hence, the proposed scheme effectively improves BER performance of the coherent IR-UWB systems without increasing system complexity, as compared to the conventional PRC algorithm.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.10
• /
• pp.47-54
• /
• 2007

Since impulse-radio-based ultra wideband (IR-UWB) do not use carrier frequency but use very short pulse to transmit data it sends data not continuously but discretely and this feature gives the potential to reduce collision in multi-user environment. In this paper, we analyse characteristic of IR-UWB and propose a new collision paradigm, Collision Distribution which changes collision level from packet to pulse. In Collision Distribution mechanical each node sends data with its own pulse interval in random time, distributed manner. It prevents packet drop due to packet collision. We show that Collision Distribution can reduce packet error and can provide real time packet transmission with analysis.