• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.363.2-363
• /
• 2002

The spectrum of impulse response signal from an impulse hammer testing is widely used to obtain frequency response function(FRF) of the structure. However the FRFs obtained from impact hammer testing have not only leakage errors but also finite record length errors when the record length for the signal processing is not sufficiently long. The errors cannot be removed with the conventional signal analyzer which treats the signals as if they are always steady and periodic. (omitted)

• 한국소음진동공학회논문집
• /
• 제12권10호
• /
• pp.792-798
• /
• 2002

The spectrum of impulse response signal from an impulse hammer testing is widely used to obtain frequency response function (FRF) of the structure. However the FRFs obtained from impact hammer testing have not only leakage errors but also finite record length errors when the record length for the signal processing is not sufficiently long. The errors cannot be removed with the conventional signal analyzer which treats the signals as if they are always steady and periodic. Since the response signals generated by the impact hammer are transient and have damping, they are undoubtedly non-periodic. It is inevitable that the signals be acquired for limited recording time, which causes the finite record length error and the leakage error. In this paper, the errors in the frequency response function of multi degree of freedom system are formulated theoretically. And the method to remove these errors is also suggested. This method is based on the optimization technique. A numerical example of 3-dof model shows the validity of the proposed method.

• Journal of Biosystems Engineering
• /
• 제22권1호
• /
• pp.41-48
• /
• 1997

A nondestructive quality inspection technique using acoustic impulse response method was studied to investigate the feasibility of egg shell inspection. An experimental system was built to generate impact force, to measure the response signal and to analyze the frequency spectrum. This system includes an impulse generating unit, an egg holding seat, a microphone with preamplifier, and a digital oscilloscope connected to Personal Computer by RS-232C interface. The factors such as impulse generating method, egg holding method, and sensor location were evaluated by analyzing the power spectrum density of the measured signal. The results obtained are summarized as follows : 1. From the sampled eggs, the proper conditions for detecting damaged eggs were found as followings; ceramic for the impact ball material, rubber for egg seat material, 20 degrees for an impact angle of pendulum, 10mm for the distance between egg and sensor, the sharp side for impacting part, and 180 degrees for the location of sensor. 2. Examination of the Fourier transformed analysis in beth normal and damaged eggs revealed that those factors such as the resonant frequency, a number of peak frequencies and the magnitude of power spectrum were important to detect damaged eggs.

• 한국지반환경공학회 논문집
• /
• 제12권4호
• /
• pp.53-63
• /
• 2011

동적 지진해석 수행 시 적절한 입력지진파를 선정 생성하는 것은 매우 중요하다. 현재 국내에서는 일반적으로 국외에서 계측된 강진 기록이나 인공지진파가 입력지진파로 사용된다. 계측지진기록은 지진파의 고유성질인 시간에 따라서 주파수 특성이 변이하는 비정상(Non-Stationary) 특성을 가지고 있지만 설계 응답스펙트럼과는 일치하지 않으며 주파수영역에서 생성된 인공지진파는 설계 응답스펙트럼과는 일치하지만 정상(Stationary) 특성을 가지고 있는 단점이 있다. 본 연구에서는 계측기록의 Non-stationary 특성을 보존하되 동시에 설계 응답스펙트럼에 상응하는 지진파를 생성하였다. 적용된 기법은 Impulse 함수를 이용하여 시간영역에서 지진기록을 목표 스펙트럼에 상응하도록 보정하는 알고리즘이다. 적용 결과, 시간영역 변화 알고리즘은 성공적으로 계측 지진기록을 설계 응답스펙트럼와 일치하도록 조정할 수 있으며 원 지진기록의 Non-stationary 특성을 보존하는 것으로 나타났다. 나아가 계측 지진기록과 보정된 지진기록을 적용한 비선형 지반응답해석을 수행한 결과, 보정된 지진파를 이용한 결과가 보다 합리적인 것으로 나타났다. 본 연구에서 변환된 지진기록은 기존 기록의 문제점을 보완하는 진보된 입력지진파인 것으로 나타났으며 추후 지진해석 시 이를 준용하는 것이 합리적일 것으로 판단된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.623-629
• /
• 2002

The spectrum of impulse response signal from an impulse hammer testing is widely used to obtain frequency response function(FRF) of the structure. However the FRFs obtained from impact hammer testing have not only leakage errors but also finite record length errors when the record length for the signal processing is not sufficiently long. The errors cannot be removed with the conventional signal analyzer which treats the signals as if they are always steady and periodic. Since the response signals generated by the impact hammer are transient and have damping, they are undoubtedly non-periodic. It is inevitable that the signals be acquired for limited recording time, which causes the finite record length error and the leakage error. In this paper, the errors in the frequency response function of multi degree of freedom system are formulated theoretically. And the method to remove these errors is also suggested. This method is based on the optimization technique. A numerical example of 3-dof model shows the validity of the proposed method.

• 대한기계학회논문집
• /
• 제18권11호
• /
• pp.3075-3083
• /
• 1994

The applications of the electrical transmission line theory to the pressure propagation characteristics in the volume loaded fluid transmission line with step and impulse input wave is demonstrated in this paper. The method is based on the premise that the time response is the inverse Fourier transform of frequency spectrum of the wave which spectrum is a product of frequency spectrum of input pressure wave and system transfer function. The frequency response and transient response of step and impulse input wave in the volume loaded fluid transmission line is analysed by the Laplace transform and inverse Laplace transform with FFT numerical algorithm. The numerical solution of the distributed friction model is compared with the average friction model and the infinite product model. And the result is showed that FFT method may have major advantages for the simulation of fluid circuitary.

• 소음진동
• /
• 제4권3호
• /
• pp.337-343
• /
• 1994

A method of the leak detection from the pipe system by using accelerometer is proposed. The signal detected from accelerometer is proved experimentally to be a dispersive wave. Based on the experiments, a method using the narrow band pass filter and the unit impulse response function is analyzed. The method uses the characteristics of the unit impulse response function, that the function is available evenin the narrow band signal because, unlike the cross correlation, it is normalized by the auto spectrum. The accelerometer is quite easier to use than the hydrophone in adapting to the pipe system.

• 한국지반공학회지:지반
• /
• 제13권1호
• /
• pp.111-122
• /
• 1997

표면파를 이용하여 지반의 강성을 추정하는 기법인 SASW 시험에서 위상속도(phase volocity)를 결정하기 위해서는 위상각(phase angle)의 전개(unwrapping)가 필수적이다. 포장 구조에서처럼 깊이에 따라 강성의 차이가 현저한 경우는 기존의 위상각 전개방식으조는 정확한 위상속도를 결정하기가 용이하지 않다. 이는 기존의 위상각 전개방식은 주위상각(principal phase angle)에 2n의 정수배를 더하는 것인데, 위상각 스펙트럼(phase spectrum)에서 정수배를 결정하는 데에 어려움이 있기 때문이다. 본 연구에서는 이러한 문제점을 해결하기 위해서, 임펄스 응답 필터 기법(Impulse Response Filtration Technique), 또는 IRF기법이라고 하는 새로운 위상각 분석 기법을 제안하였다. IRF 기법의 원리는 임펄스 응답을 필터 처리함으로써 파군(wave group)을 분리하는 것인데,파군의 분리는 임펄스 응답에 대한 Gabor spectrogram을 분석한 정보를 근거로 한다. Gabor spectrogram은 전파되는 파의 에너지를 주파수-시간 공간에서 나타내는 contour 그림으로서, 파군의 전파 상황을 시각적으로 표현하는 수단이다. 이렇게 필터 처리된 임펄스 응답을 이용하면, 위상각 스펙트럼의 분석을 정확하게 할 수 있으며, 위상각의 전개에 있어서 난해함을 제거할 수 있다. 끝으로, 전쳔적인 포장 구조에 대하여 이론적으로 SASW 시험을 모사하였으며, 그 결과를 이용하여 IRF기법의 효용성을 입증하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.71-77
• /
• 2002

The spectrum of impulse response signal which is obtained from an impulse hammer testing is used for frequency response function, nevertheless it has serious faults when the record length for the signal processing is not very long. The faults cannot be avoided with the conventional signal analyzer that is processing all the signals as if they are always periodic. The signals generated by the impact hammer are undoubtedly non-periodic because of the damping, and are acquired for limited recording time due to the memory as well as the computation performance of the signal analyzer. This paper will make clear the relation between the faults and the length of recording time, and propose the way for solving the faults.

• Journal of Biosystems Engineering
• /
• 제23권1호
• /
• pp.67-74
• /
• 1998

A nondestructive quality inspection technique using acoustic impulse response method was developed for eggshell inspection. An experimental system was built to generate the impact force, to measure the response signal and to analyze the frequency spectrum. This system includes an impulse generating unit, an egg holding seal a microphone with preamplifier, and a DSP board installed on Personal Computer. A simple algorithm .was developed for crack detection. Using the developed system with algorithm, crack detection ability was evaluated and the error rate to estimate the normal egg as cracked was found to be 4% and the error rate to estimate the cracked egg as normal was also found to be 4%. This system could be adopted in industry with some modification.