• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.3159-3162
• /
• 2008

A sensitivity analysis of the liquid rocket engine has been made. A mode analysis program is used to predict the performance change due to the variation of rocket engine operating environment. The propellant supply pressure and density are the major variables of the operating condition. The material properties of the turbine driving gas is assumed as the function of mixture ratio. The discrepancies of performance change between constant turbine driving gas properties and variable properties are greater for the case of fuel pump inlet pressure change than the oxidizer pump inlet pressure change.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.1174-1176
• /
• 1993

Morphology of low density polyethylene(LDPE) such as the degree of crystallinity changes with thermal history etc. In order to clarify the effects of morphological changes on electrical breakdown, we studied direct current and impulse breakdown phenomena of LDPE films heat-treated at 100[$^{\circ}C$] for 1[H] in silicone oil and subsequently cooling to various ways. The degree of crystallinity was estimated by the infra red absorption and X-ray diffraction measurements for the specimens of slowly cooled, cooled in water, original, and cooled in liquid nitrogen gas. As the result, we obtained that the first, second, third, and fourth was slowly cooled of 70.23[%], cooled in water of 61.6[%], original specimen of 56.75[%], and cooled in liquid nitrogen gas of 34.7[%] respectively. The crystalline size and distribution of specimens were researched by Differential scanning calolimeter measurements.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.298-302
• /
• 2009

Low power Hall thruster is under development as one of the core technologies for STSAT-3. The Hall thruster has several advantages such as its simple structure, high thrust density and specific impulse etc. Development target values deduced by analyzing requirements are consumed electrical power, thrust, thrust efficiency, and specific impulse of < 300 W, > 10 mN, ~ 35%, and > 1000 s, respectively. In order to achieve the target specifications, two prototype Hall thrusters were developed and compared. To date, thrust and efficiency are 11 mN and 37% under the total power of 290 W with 0.97 mg/s Xe propellent supply.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.577-587
• /
• 2004

A coaxial pulsed plasma thruster (PPT) with a Teflon cavity was designed, and its performance characteristics were examined varying stored energy, cavity length and capacitance. The PPT was tested as the entire system including the discharge circuit, and the results were explained with both the transfer efficiency and the acceleration efficiency. The transfer efficiency is defined as the fraction of energy in capacitors supplied into plasma, and the acceleration efficiency as the fraction of energy supplied into plasma converted to thrust energy. To estimate these efficiencies, the equivalent plasma resistance was defined and calculated using energy conservation during discharge. The equivalent plasma resistance proportionally increased with cavity length, and therefore the current peak increased with decreasing cavity length. The energy density calculated by the transfer efficiency was increased with decreasing cavity length. As a result, higher acceleration efficiency and lower transfer efficiency were obtained with shorter cavity length. Accordingly, there was an optimal cavity length for the thrust efficiency. The specific impulse and the impulse bit per unit stored energy ranged from 390 s and 50 $\mu$ Ns/J for a cavity length of 34 mm to 825 s and 11 $\mu$ Ns/J for a cavity length of 4 mm when the stored energy was fixed to 21.4J. Thus, it was showed that the performance of this PPT approached that of electromagnetic-acceleration-type PPT with decreasing cavity length. The PPT achieved thrust efficiencies of 10-12% at 21.4 J and 6-7% at 5.35 J at cavity lengths between 14 mm and 29 mm.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.623-626
• /
• 2005

Toward the practical applications, on operation of conduction-cooled HTS SMES at temperatures well below 77 K should be investigated, in order to take advantage of a greater critical current density of HTS and considerably reduce the size and weight of the system. Recently, research and development concerning application of the conduction-cooled HTS SMES that is easily movement are actively progressing in Korea. Electrical insulation under cryogenic temperature is a key and an important element in the application of this apparatus. Using multi wrapped copper by polyimide film for HIS SMES, the breakdown characteristics of models for turn-to-turn, that is surface contact model, were investigated under ac and impulse voltage at 77 K. A material that is Polyimide film (Kapton) 0.025 mm thickness is used for multi wrapping of the electrode. Statistical analysis of the results using Weibull distribution to examine the wrapping number effects on breakdown voltage under ac and impulse voltage in $LN_2$ was carried.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.254-254
• /
• 2013

마그네트론 스퍼터링은 그 단순한 구조로 인하여 신뢰성과 확장성이 높은 기술이다, 이로 인해 DLC, ITO 등의 산업 분야에서 많이 사용하는 박막 공정 기술이다. 하지만 인듐과 같은 희토류 금속의 가격이 최근 상승함에 따라 나타난 낮은 타겟 효율성의 문제와 낮은 파워 밀도로 인한 기판의 추가적인 bias 추가에 따른 비용상승, 그리고 reactive 스퍼터링 시 낮은 증착률 등의 문제점들 또한 존재한다. 이러한 단점들을 해결하기 위해 많은 연구들이 이루어 졌으며, 높은 파워 밀도를 위해 High power Impulse Plasma Magnetron Sputtering (HIPIMS) 기술과 타겟 사용률을 높이기 위한 High Target Utilization Sputtering (HITUS) 등의 기술 등이 개발되었다. 본 연구에서는 직류 전원을 사용한 High density Plasma Sputtering System (HIPASS)이라 명하는 고밀도 원거리 플라즈마 소스를 이용한 스퍼터링 이용해 증착한 박막의 특성을 연구 하였다. Hollow cathode discharge에서 발생한 고밀도 플라즈마가 외부 유도 자장 코일에 의하여 타겟 표면까지 도달하게 되며, 스퍼터링 타겟의 고전압 bias에 의해 플라즈마 이온들이 가속이 이루어져 스퍼터링 공정이 이루어 지게 된다. 본 연구의 공정에서 타겟 사용 효율은 최대 90%까지 이며, 원거리 플라즈마 소스에서의 이온으로 스퍼터링을 실시함으로 인해 스퍼터링 전압과 전류의 독립적인 조절이 가능 하다. 본 연구에서 HIPASS을 이용하여 기판에 추가적인 전압 인가 없이 Ti 타겟과 아르곤/질소 혼합가스를 사용하여 TiN 박막을 증착 하였다. TiN의 증착률은 약 44 nm/min였으며, 이 박막의 XRD 분석 결과 TiN (111), (200), (220) 면들이 관찰이 되었다. 높은 스퍼터링 입자 에너지에서 증착 된 TiN 박막에서 우선적으로 나타나는(200)과 (220) 면들이, 본 실험에서는 기판에 추가적인 전압인가 없이도 우선방위 성장을 보였다. 이 박막의 micro-hardness 측정 결과 약 34.7 GPa이며, 이는 UBM 이나 HIPIMS에서 보여주는 결과에 준하거나 그 이상의 수치이다. 이와 같은 결과는 본 연구에서 사용한 HIPASS 증착 공정이 높은 스퍼터링 입자 에너지를 가지기에 고밀도의 TiN 박막이 증착 된 결과로 볼 수 있다.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.18 no.1
• /
• pp.213-225
• /
• 1988

This study was to compare the quality of image by different screen and film combinations. Using the sensitometer measured the speed and average gradient of blue sensitive films and orthochromatic films. The films was combined with rare earth screen LR, LM, LF and conventional screen OM, OH, XOR, OKa and exposed the step wedge to impulse 2, 3, 4, 6, 10, 15, 24,3 8, 60 and measured the density. The following results were obtained: 1. The density of film and film-screen combinations showed significant difference, then in film-screen combinations was significantly different by the screens than films. 2. The speed of blue sensitive films was little different, the TMG of orthochromatic films produced high speed, and the AX film was high average gradient. 3. The relative speed of film-screen combinations showed significant difference, and was high in the OKa of the conventional screens and in the LR of the rare earth screens, especially that of LR screen in the combination with blue sensitive films was high. 4. The average gradient of film-screen combinations showed no significant difference, and was high in the OKa screen and LR/OG combination, and that of OKa/AX combination was highest. 5. The latitude of film-screen combinations showed significant difference by screens, and was high in the LM screen in combination with blue sensitive films and in the OM screen in combination with orthochromatic films. 6. The subject contrast of film-screen combinations showed significant difference by screen, and was high in the LR screen in combination with blue sensitive AX film and orthochromatic TMG film.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.4
• /
• pp.207-210
• /
• 2017

The suspension arrangement of insulators provides flexibility and assists in power transmission in transmission lines. The performance of the insulator string is strongly influenced by the environmental conditions to which it is exposed, its shape and the inherent material properties of suspension-type insulators. The suspension-type insulators are mostly made from glass, porcelain and ceramic material due to their high resistivity. Irregularity in charge distribution throughout the porcelain insulator may lead to accelerated aging and electrical breakdown. A very high and steep lightning impulse voltage may also cause breakdown of suspension-type insulators. We investigated various material characteristics such as alumina addition, surface morphology, x-ray diffraction pattern and relative density of suspension porcelain insulators manufactured in 1989 (36,000 lbs.), 1995 (36,000 lbs.) and 2001 (36,000 lbs.) by the KRI Company for use in 154 kV high power transmission lines. We compared the material characteristics of these porcelain insulators with that of the top-of-the-line porcelain insulators (36,000 lbs.) manufactured by the NGK Company in 2000. These suspension-type porcelain insulators were exposed to arc and flashover tests to examine their electrical and mechanical strength. It was noted that alumina addition (17 wt.%) for K-2001 was one of the major contributors to the enhancement of the performance of the porcelain insulators and to their ability to withstand very high current generation during the arc test. The porcelain insulators manufactured during 2001 also showed the highest relative density of 95.8% as compared to the other insulators manufactured in 1989 and 1995 respectively 94.2% and 91.5%. We also discuss reports of various failure modes of suspension-type porcelain insulators.

• Journal of the Institute of Convergence Signal Processing
• /
• v.21 no.3
• /
• pp.113-120
• /
• 2020

With the recent development of communication equipment, the demand for communication equipment is gradually increasing. Accordingly, various signal processing has been studied. In the case of an image, noise removal is an indispensable step because noise propagation problems may occur if noise is not removed in the pre-processing process. Salt and Pepper noise is a typical impulse noise with two extremes. Various studies have been conducted to remove such noise, and there are CWMF, MF and MMF. However, the existing methods are somewhat insufficient in the high-density noise region. Therefore, in this study, we have proposed an algorithm that filters the size of the mask according to the number of noises inside the 7×7 mask and filters it with a modified switching filter using the histogram distribution of the image. In the case of the proposed algorithm, noise can be effectively removed in a high-density noise region. For objective judgment, PSNR was used to compare and analyze with existing algorithms.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.11
• /
• pp.1431-1436
• /
• 2020

In modern society, various video devices such as CCTV and black boxes are used for convenience. However, noise is frequently generated in the process of transmitting and receiving video images and video signals photographed at night. If such noise is not eliminated, the problem that the image is difficult to identify is generated. Accordingly, noise elimination of images in the image information is an indispensable step. Salt and Pepper noises are typical impulse noises among image noises. Previous research has been carried out as a method for eliminating noise, and CWMF, MMF and A-TMF are typical methods. In common, such a filter exhibits excellent performance in a low-density noise area, but a disadvantage is that noise elimination performance in a high-density noise area is somewhat insufficient. Accordingly, the proposed algorithm uses the inflection point of the histogram graph to separate areas and remove singular points, and proposes a weighting filter utilizing histogram distribution. PSNR was used for objective judgment.