• Progress in Superconductivity
• /
• v.13 no.1
• /
• pp.24-27
• /
• 2011

High voltage insulation in cryogenic environment is one of big issues for development of superconducting power application, such as superconducting fault current limiter, transformer, transmission cable, and so on. We had proposed a composite solid insulator composed of plastics and polymer insulation sheets for a use of high voltage superconducting power applications. It is well known that the G10 FRP keeps its mechanical strength at very low temperature and the PPLP is very good insulator adopted as insulations for superconducting transmission cables. The composition of these two materials will show very good electrical and mechanical properties adequate for the insulation components of superconducting power applications, such as bushing, insulation barrier, and even for a cryostat. Dielectric strengths of prepared samples were measured at the temperature of boiling point of liquid nitrogen at atmospheric pressure, which will be presented in this paper to show a usefulness of this technique.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.3
• /
• pp.269-275
• /
• 2012

Carbon-fiber reinforced plastic(CFRP) laminates made of nano-particle-coated carbon fibers and damaged by a simulated lightning strike were tested under compression-after-impact(CAI) mode, during which the damage progress due to compressive loading has been monitored by acoustic emission(AE). The impact damage was induced not by mechanical loading but by a simulated lightning strike. Conductive nano-particles were coated directly on the fibers, from which CFRP coupons were made. The coupon were subjected to the strikes with a high voltage/current impulse of 10~40 kA within a few ${\mu}s$. The effects of nano-particle coating and the degree of damage induced by the simulated lightning strikes on AE activities were examined, and the relationship between the compressive residual strength and AE behavior has been evaluated in terms of AE event counts and the onset of AE activity with the compressive loading. The degree of impact damage was also measured in terms of damage area by using ultrasonic C-scan images. The assessment during the CAI tests of damaged CFRP showed that AE monitoring appeared to be useful to differentiate the degree of damage hence the mechanical integrity of composite structures damaged by lightning strikes.

• 유체기계공업학회:학술대회논문집
• /
• 2004.12a
• /
• pp.180-186
• /
• 2004

Average Bi-directional flow tube was suggested to measure single and two phase flow rate. Its working principle is similar with Pilot tube, however, it makes it possible to eliminate the cooling system which is normally needed to prevent from flashing in the pressure impulse line of Pilot tube when it is used in the depressurization condition. 3-dimensional steady state flow analyses using FLUENT 5.4 code were performed to validate the application of the averagebi-directional flow tube in case of water and air flow In this study, sensitivity studies have been performed to optimize the design features of the average hi-directional flow tube which can be applied for the various experimental conditions. For Re numbers above 1000, the k values are nearly constant regardless of the Re numbers and flow types and calculation results and experimental data coincides quite well. The current FLUENT calculation results suggest that linearity of the k values in various design features of the average BDFT is highly promising, which means that it is quite reasonable to select the typical design of the average BDFT for the convenience of the experimental conditions.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.168-171
• /
• 2007

A technical review of current slurry and gelled propellants is presented. In advanced countries, it is confirmed that these propellants have high specific impulse, density, excellent handling, safety characteristics and thrust controllability through research since 1950s. Substantial researches have been pursued to characterize the rheological properties, spray/combustion phenomena and propulsion system design for the gel propellant characteristics. Slurry and gelled propellants are developing actively to applicate both military and space propulsion fields such as tactical missile, air-breathing ramjet, pulse detonation engine, and combined cycle engine of future propulsion mode.

• The Research Journal of the Costume Culture
• /
• v.8 no.1
• /
• pp.87-101
• /
• 2000

The purpose of study is explaining the Historicism as a result of compromise, historical eclecticism, between historical things and current cultural background instead of regarding it as an imitation from the past. It means that external factors in history help internal esthetic value surface out as costume. Fashion s history is more than the classified thing according to the appearance with the changes of the times. Intrinsic cultural elements should be added in creating new fashion. One of the different features between Modernism and Post-modernism. When coming to the period of Post-modernism, it connected with the historical factors to make something new by fragmenting, magnifying, or minimizing them. This is calles 'Historicism'in the world of art. It revived the past, not the past itself, in new ways : quotation, reuse, metaphor, and mixture. To represent the image, parody, pastiche, or bricolage was usually used. In post-modernism fashion, parody is a technique for imitating the past or the preceding forms with artists'own critical points of view. This technique gives us shock or surprise by using satirical, ironical or paradoxical expressions. pastiche shares the same part with parody in imitating particular or unique style, and it can be renamed empty parody, because it doesn't have any hidden motivation or satirical impulse. bricolage is a mixture of quotations from other works. It contains fragments that deepen the image. Like the techniques uttered above, the revival of history through parody, pastiche or bricolage is historical eclecticism and it is included in Historicism.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.1
• /
• pp.83-93
• /
• 1997

This paper deals with measurements and evaluation of the time-changing electric and magnetic fields at a high-voltage laboratory. The electromagnetic disturbances originate mainly from ground faults and on/off operations of electric power equipments. The electronic circuits and control devices are very sensitive to electromagnetic interferences. It is necessory to evaluate the levels of interferences for a given electromagnetic environment. The electric field was observed by the electric field sensor having the bandwidth of the range from 40 Hz to 200 MHz, and the time-changing magnetic field was measured by the loop sensor of which the output is directly proportional to the incident signal. Also, the frequency components of the time-changing electric and magnetic fields induced by an oscillatory transient current and a chopped impulse voltage were analyzed by terms of the fast Fourier transformation, and those give the information about the levels of the electromagnetic interferences and the design of the electromagnetic shielding enclosures.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.9
• /
• pp.1742-1746
• /
• 2008

Catechol and caffeine were simultaneously analyzed with a bismuth-immobilized carbon nanotube paste electrode (BPE) using square wave (SW) stripping voltammetry. Optimum analytical conditions were determined. Simultaneous working ranges of 100-1,500 $mgL^{-1}$ for caffeine and 5-75 $mgL^{-1}$ for catechol were obtained. In the separated cell systems, a working range of 0.1-2.1 $mgL^{-1}$ catechol with a correlation coefficient of 0.9935, and a working range of 10-210 $mgL^{-1}$ caffeine with a correlation coefficient of 0.9921 were obtained. A detection limit (S/N) of 0.15 $mgL^{-1}$ (7.7 ${\times}$ $10^{-7}$ M) and a detection limit of 0.02 $mgL^{-1}$ (1.82 ${\times}$ $10^{-7}$ M), respectively, manifested for catechol and caffeine. It was found that three macro-type electrode systems could be implanted in fish and rat neuro cells. For both ions, the ion currents were observed. The physiological impulse conditions and the neuronal thinking current were also obtained.

• East Asian Journal of Business Economics (EAJBE)
• /
• v.8 no.1
• /
• pp.57-69
• /
• 2020

Purpose - This study examines what are the asset market fluctuations in Europe and how each economic variable affects major variables, and explore the dynamics of housing and stock market through Greece. The variables under consideration are balance on current account (BCA), index of stock (STOCK), gross domestic product (GDP), housing price indices (HOUSING), M3, real rate of interest (IR_REAL) and household credits (LOAN). We investigate the functional and causal relationships between housing and stock market. Research design, data, and methodology - Vector error correction model (VECM) is used to figure out the dynamic relationships among variables. This study also contains the augmented Dickey-Fuller unit root, cointegration, Granger causality test, and impulse response function and variance decomposition analysis by EViews 11.0. Results - The statistical tests show that all variables under consideration have one unit root and there is a longterm equilibrium relationship among variables for Greece. GDP, IR_REAL, M3, STOCK and LOAN can be considered as causal factors to affect real estate market, while GDP, LOAN, M3, BCA and HOUSING can bring direct effects to stock market in Greece. Conclusions - It can be judged that the policy that affects the lending policy of financial institutions may be more effective than the indirect variable such as monetary interest rate.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.611-616
• /
• 2004

In this study, microfabrication of a micro-arcjet nozzle with Fifth-harmonic generation Nd：YAG pulses (wavelength 213 nm) and its thrust performance tests were conducted. A micro-arcjet nozzle was machined in a 1.2 mm thick quartz plate. Sizes of the nozzle were 0.44 mm in width of the nozzle exit and constrictor diameter of 0.1 mm. For an anode, a thin film of Au (~100 nm thick) was deposited by DC discharge PVD in vacuum on divergent part of the nozzle. As for a cathode, an Au film was also coated on inner wall surface. In operational tests, a stable discharge was observed for mass flow of 1.0mg/sec, discharge current of 6 ㎃, discharge voltage of 600 V, or 3.6 W input power (specific power of 3.6 MW/kg). In this case, plenum pressure of the discharge chamber was 80 ㎪. With 3.6 W input power, thrust obtained was 1.4 mN giving specific impulse of 138 sec with thrust efficiency of 24 %.

• Journal of Families and Better Life
• /
• v.21 no.4
• /
• pp.41-53
• /
• 2003

The purpose of this study is to understand and verify the incentives as an important market environment and to help consumers use them effectively, and consequently to improve the consumer welfare. This study examined the representative incentive, the sales promotions which can effect on the consumer decision making process and current issues of them. For the purpose, a coffee specialty store was hypothesized and the subjects were 20∼30 years old, since the sales promotions can be more effective toward the younger consumers making their decisions low-involvement goods and services. The conclusions can be summarized as follows; Consumers understand the advantages and disadvantages of sales promotion very well, and use them rationally and usefully to maximize their satisfaction. the sales promotions act as incentives in the all steps of decision making processes. Generally, consumers prefer to get things at a good price, so in this survey, the discount coupons and the point accumulative membership had more effect than others. Consumers pointed out controversial issues of the sales promotions as follows: the sales promotions could bring about cost rising and unnecessary and/or impulse buying, and stir up speculative motivation. These are common serious problems in the sales promotions. The sales promotions are very useful tools in promoting sales but not fundamental in the long run. Marketers and manufacturers should keep it in mind that the best way to satisfy the consumers is to keep all things in good quality and moderate price.