• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.37
• /
• pp.253-273
• /
• 2008

The thesis examines the problems for improvement of clearance procedure and shows the various ways of overcoming them. Practical implications regarding the innovation of clearance procedure are as follows. First, the basis of information for customs clearance service should be built for unifying customs clearance information and imports and exports goods. Second, Customs Service need to keep on trying continuously that customs clearance system should be inter-convertible in the inside and outside of the country. Third, reliable law and execution system should be needed to revitalize customs clearance business and the government need to take measures for new system which is suitable for our own country. Finally, mutual cooperation administration system for customer in domestic and foreign country should be made for supplying high quality clearance service. As we have reviewed above contents, the customs clearance business meet the needs of innovation with new information technique to overcome lots of problems which come by when we execute simplification of customs clearance procedure and customs inspection administration fairly. As well as, when we review a few methods in the line of our customs system, we need strongly completion of related system and arrangements in trade business and similar fields. Hereafter we hope the limitation of this study should be overcome by the process of proper inspections through subsequent studies.

• International Commerce and Information Review
• /
• v.12 no.1
• /
• pp.55-73
• /
• 2010

The thesis examines new innovation of various aspect to overcome lots of problems which come by when we execute simplification of trade procedure and administration fairly. Practical implications regarding the innovation of electronic trade infrastructure are as follows. First, it will propel the standardization of electronic trade section in the technical side and the construction atmosphere of international authentication system must be created. The work process should be redesigned in order to implement export-import procedures that meet the relevant standards. Second, the improvement of system for electronic process is necessary in the law and institutional aspect. In order to eliminate any obstacles to the trade procedure, clearer legal grounds regarding legitimate controls and minimum necessity must be established. Also, laws should be revised to admit mutual recognition among certification organizations, in lieu of international agreement-based mutual recognition between government. Third, the detailed improvement for the integration of the electronic trade infrastructure will be demanded. Additionally, user-centered quality management protocols should be established via connections with the systems already existing in governmental bodies. Fourth, various trade institution should harmonized and interconnected with other partners through mutual cooperation for standardization of operational system. A system which can monitor and remotely diagnose and resolve system errors should be established to provide tailor-made service and improve operational efficiency. At the same time, it is necessary to build a cooperative system to share information and promote comprehensive management for efficient operation.

• Korean Journal of Remote Sensing
• /
• v.5 no.1
• /
• pp.41-56
• /
• 1989

Improvement of the multichannel sea surface temperature(MCSST) software, which had been developed for the purpose of operating under mainframe computer system, was seeked in order to operate effectively in a mini computer system. CPU time and processing time, which is not a major factor under mainframe computer system, become a critical factor in real time image processing under mini computer system. Due to fixed kernel size(3$\times$4) of the old MCSST software, high spatial resolution characteristics of the original image received from satellites were apparently degraded when images are transformed into a cartesian coordinate system after geometrical distortions of the image due to earth curvature are removed. CPU and processing time were reduced to 0.13 and 0.15~0.22 comparing with the old MCSST's, respectively, by applying disk block I/O and M/T queue I/O method under VAX-11/750 computer. The high resolution quality (1.1km in AVHRR) of the processed image was guaranted using 2$\times$2 kernel size and applying moving window techniques without sacrificing CPU and processing time much.

• Smart Media Journal
• /
• v.8 no.2
• /
• pp.86-93
• /
• 2019

The purpose of this study is to develop walk score application GUI in a smart device for improving user convenience. This study uses the walk score dataset of Seoul City developed in previous studies. Application GUI consists of five parts: address input window and search button, detail information (address, latitude, longitude, walk score), window switching and input window for a number of data, data input window, and menu button. For verifying application GUI, this study uses 12 locations (sets of address, latitude, longitude, and walk score) near Gangnam Station and Myungdong Station in Seoul in several scenarios. First, this study checks if the application has been implemented with address and keyword search options. Then, new data insertion and file output operations are evaluated. The application system developed in this study operated properly in all scenarios. This walk score application can be a useful device in our daily lives.

• Nuclear Engineering and Technology
• /
• v.49 no.4
• /
• pp.776-780
• /
• 2017

To avoid imaging artifacts and interpretation mistakes, an improvement of the uniformity in gamma camera systems is a very important point. We can expect excellent uniformity using cadmium zinc telluride (CZT) photon counting detector (PCD) because of the direct conversion of the gamma rays energy into electrons. In addition, the uniformity performance such as integral uniformity (IU), differential uniformity (DU), scatter fraction (SF), and contrast-to-noise ratio (CNR) varies according to the energy window setting. In this study, we compared a PCD and conventional scintillation detector with respect to the energy windows (5%, 10%, 15%, and 20%) using a $^{99m}Tc$ gamma source with a Geant4 Application for Tomography Emission simulation tool. The gamma camera systems used in this work are a CZT PCD and NaI(Tl) conventional scintillation detector with a 1-mm thickness. According to the results, although the IU and DU results were improved with the energy window, the SF and CNR results deteriorated with the energy window. In particular, the uniformity for the PCD was higher than that of the conventional scintillation detector in all cases. In conclusion, our results demonstrated that the uniformity of the CZT PCD was higher than that of the conventional scintillation detector.

• IE interfaces
• /
• v.9 no.2
• /
• pp.105-117
• /
• 1996

This paper presents an automated system for inspecting surface finish quality of gear teeth. The purpose of the presented system is to improve both efficiency and reliability of a gear inspection process with a lower cost. The system consists of two modules; one is for data collection and the other for data analysis. While and A/D converter is built in a PC to efficiently obtain digitized data, a window-based software for conducting quality tests is provided using VISUAL BASIC as well as C++. We successfully connect them with the existing gear tester. This system would be also useful for the gear quality improvement by means of a continuous data management.

• KIEAE Journal
• /
• v.14 no.1
• /
• pp.31-38
• /
• 2014

Recently, the coverage of urban forests has been rapidly decreasing as the cities are created and expanding. Consequently, there arise urban problems such as heat island effect, urban flooding, urban desertification and so on. In this context, green roof systems is considered to be an efficient alternative to deal with these problems. However, it is difficult to apply green roof to new buildings since the majority of the buildings in cities are already constructed and the demand for new building constructions is not high enough. Therefore, it should be considered to apply green roof system to existing buildings for resolving various problems. This study evaluates heating and cooling energy consumption based on the combination of passive design factors such as wall, roof, window insulation in addition to a green roof system applied to an existing house by using an energy simulation program. Total 8 potential improvement cases are developed. Each case is applied to the same house with different insulation standard for simulations. Through the analysis of the simulated cases with the chosen test house, it is confirmed that heating energy consumption decreases as improvement cases are applied, but cooling energy consumption is relatively not much affected by each improvement case. In addition, when each improvement case is applied to already highly insulated house, the effect of thermal energy improvement decreases while the same improvement that is applied to the case with low insulated house tends to yield higher improvement rate.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.2
• /
• pp.160-164
• /
• 2022

In this paper, through the development of a smart panel (LCD kiosk) controller, contents to develop a system that can be operate in a desired environment by operating the window control and ventilation facilities according to the automatic controller operation based on the set values such as temperature, humidity, sunlight, and rainfall. In particular, the MQTT protocol-based sensor module can be directly manufactured and applied at any time based on various communication and power sources such as wireless, wired, and PLC (power line communication) to obtain the desired data, as well as fire, power failure, and intrusion in the house. It is also a system that enables operation and monitoring from a remote location based on the cloud environment by connecting sensors. Kiosks are currently being used in many places, and the demand for them is on the rise, and an active influx of young people can be expected through environmental improvement. It is expected to increase interest and understanding for improvement.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.56.6-56
• /
• 2001

The FDAS(Flight Data Analysis & Animation System) is a comprehensive analysis system designed for the improvement of flight safety. FDAS provides decoding, analysis and animation tools that can be used for investigation of data origination primarily from Flight Data Recoders(FDRs), Quick Access Recoders(QARs), Using FOQA(Flight Operation Quality Assurance) Data Analysis, an analyst can perform a variety of functions including data smoothing, interpolation, differentiation, integration, calculator function, flight path generation, performance routines, as well as user-programmed functions. Utilizing data captured and processed by our FDAS software module, FDAS provides high-fidelity 3-D aircraft views and instruments views. Multiple windows enable you to view the situation from a variety of perspectives, including out-of-window, chase plane ...

• KIPS Transactions on Software and Data Engineering
• /
• v.10 no.11
• /
• pp.449-456
• /
• 2021

An intrusion detection system is a technology that detects abnormal behaviors that violate security, and detects abnormal operations and prevents system attacks. Existing intrusion detection systems have been designed using statistical analysis or anomaly detection techniques for traffic patterns, but modern systems generate a variety of traffic different from existing systems due to rapidly growing technologies, so the existing methods have limitations. In order to overcome this limitation, study on intrusion detection methods applying various machine learning techniques is being actively conducted. In this study, a comparative study was conducted on data preprocessing techniques that can improve the accuracy of anomaly detection using NGIDS-DS (Next Generation IDS Database) generated by simulation equipment for traffic in various network environments. Padding and sliding window were used as data preprocessing, and an oversampling technique with Adversarial Auto-Encoder (AAE) was applied to solve the problem of imbalance between the normal data rate and the abnormal data rate. In addition, the performance improvement of detection accuracy was confirmed by using Skip-gram among the Word2Vec techniques that can extract feature vectors of preprocessed sequence data. PCA-SVM and GRU were used as models for comparative experiments, and the experimental results showed better performance when sliding window, skip-gram, AAE, and GRU were applied.