• Journal of the Korean Society of Marine Environment & Safety
• /
• 제26권3호
• /
• pp.277-285
• /
• 2020

Recently, studies have been actively conducted on seismic design and improvement of the seismic performance of bridges, buildings, factories, and plants. In particular, heavy items that are being manufactured or waiting to be shipped from factories (such as generators, engines, and boilers) must be equipped with seismic stoppers to prevent them from moving or falling during an earthquake. Seismic stoppers should be suitably determined by the size and weight of these heavy items; however, they have no general design standard. In this study, structural analyses and seismic tests were conducted to evaluate the performance of newly designed seismic stoppers. Structural analysis was performed on three stopper models to estimate the external load at which the yield stress of the material was not exceeded. Based on the analysis results, a seismic test of the stopper was carried out in accordance with the AC156 test method. Finally, product specifications for all three seismic stopper models were determined and their static/dynamic load performance was evaluated.

• Fire Science and Engineering
• /
• 제22권4호
• /
• pp.76-84
• /
• 2008

Researches on fire resistant performance of primary structural elements such as columns and beams located at above the ground have actively been doing than those located at the below the ground from many researchers. But the structural elements such as columns at underground is very important in aspects of not only structural performance but also fire environment. The columns at the basement carry all the structural loads from the above and that means very critical in fire circumstances than that located at above the grounds. To evaluate the fire resistance performance of primary structural elements located at below the ground we conducted several sorts of surveys that contained fire regulations from several countries and structural types, materials and status of passive fire protection methods.

• Transactions of the Korean Society of Automotive Engineers
• /
• 제16권2호
• /
• pp.114-119
• /
• 2008

The modern automotive industry develops innovative vehicle designs to meet increasing stability of car and performance demands of their customers. The improvement of frame rigidity by the structural foam is thought to be an effective means to improve the performance because of high applicability and minimum weight. The object of this paper is to examine the use of structural foam in a hat section as an optimum reinforcing means, to compare the reinforcing performance of structural foam versus a plastic reinforcement. The result of this paper indicated that reinforcing efficiencies are achieved by structural foam and plastic reinforcement shape.

• The Korean Journal of Health Service Management
• /
• 제10권1호
• /
• pp.27-37
• /
• 2016

Objectives : This study applied the research model of Bontis (1998), which has been used to investigate everything from business corporations to hospitals in Korea, examined its generalizability and attempted to verify which factors of the intellectual capital affects organizational performance, represented by indicators for the clinical and financial performance of hospitals. Methods : Primary data for the study were collected from 91 general hospitals through self-administered questionnaires, and secondary data on clinical and financial performance of hospitals were collected form existing statistics. Collected data were analyzed with SPSS 11.5 (ver.) and AMOS 18.0 (ver.). Results : It was found that only human capital and customer capital had indirect effects on hospital performance. It was also revealed that structural capital had a direct effect on clinical performance, and an indirect effect on financial performance. Conclusions : This result means that there is a need to individually consider both the clinical performance and financial performance when measuring the organizational performance of a hospital, and it also shows that positive improvement in the clinical performance can contribute to the improvement of the financial performance through this process.

• Proceedings of the KSME Conference
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.571-575
• /
• 2008

An engine cradle is a quite important structural assembly for supporting the engine, suspension and steering parts of vehicle and absorbing the vibrations during the drive and the shock in the car crash. Recently, the engine cradle having structural stiffness enough to support the surrounding parts and absorbing the shock of collision has been widely used. The hydroforming technology may cause many advantages to automotive applications in terms of better structural integrity of parts, reduction of production cost, weight reduction, material saving, reduction in the number of joining processes and improvement of reliability. We focus on increasing the durability and the dynamic performance of engine cradle. For realizing this objective, several optimization design techniques such as shape, size, and topology optimization are performed. This optimization scheme based on the sensitivity can provide distinguished performance improvement in using hydroforming.

• Journal of the Korea institute for structural maintenance and inspection
• /
• 제3권3호
• /
• pp.129-137
• /
• 1999

Reinforced concrete structures using early age concrete were result in the degradation of structural performance due to crack, overload, unexpected vibration and impact load. It demands urgently that reinforced concrete structure using early age concrete should be improved the serviceability and structural performance with the application of new fiber materials. Therefore specimens, designed by the test varibles, such as with or without stirrup and percent of steel fiber incorporated, were constructed and tested to evaluate and develop the structural performance of reinforced steel fiber concrete beam. Based on the test results reported in this study, the following conclusions are made. Specimens, designed by the over 0.75% of steel fiber incorporated, were showed the ductile behavior and failed slowly with flexure and flexure-shear. Comparing with the load-displacement relationship of specimen BSS, designed by the recommendations of the Ministry of Construction and Transportation, reinforced steel fiber concrete beam using early age concrete, over 0.75% of steel fiber incorporated, gets enough load carrying capacity and ductility. Increasing the percent of steel fiber incorporated(0.25~2.0%), the ultimate shear stress of each specimen were increased 12~40% than that of control specimen SSS.

• Proceedings of the Korea Concrete Institute Conference
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.109-114
• /
• 2000

Recently, it is required to improve the structural performance, such as durability and earthquake resistant capacity due to the deterioration of structural components in the existing reinforced concrete building with the old aging and transition of design code. Therefore, the new technology should be developed, such as seismic retrofit and improvement of structural performance in the existing reinforced concrete building. This analytical study was performed to verify the effects of basic and reinforcing system in the reinforced concrete building. The analytical results by nonlinear finite element method were compared with the experimental results and the comparisons are judged to be good.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 한국전산구조공학회 2000년도 가을 학술발표회논문집
• /
• pp.32-39
• /
• 2000

Probabilistic structural design optimization, which is characterized by the so-called probabilistic. constraints which introduce permissible probability of violation, is preferred to deterministic design optimization since unpredictable inherent uncertainties and randomness in structural and environmental properties are to be taken quantitatively into account by probabilistic design optimization. In this paper, the well-known reliability index based MPFP(Most Probable Failure Point) search approach and the newly introduced target performance measure based MPTP(Minimum Performance Target Point) search approach are summarized and compared. The present comparison focuses on the number of iterations required for the estimation of probabilistic constraints and a technique for improvement which removes exhaustive iterations is presented as well. A 10 bar truss problem is examined for this.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제35권3호
• /
• pp.663-670
• /
• 2015

In most public transportation related master plans, decisions for investment priorities are initially made by facilities with lower installation rates or lower satisfaction (performance) levels. In general, the decisions are made without conducting importance factor analysis. In this study, a combined method of importance-performance analysis (IPA) model for bus users related in travel time is proposed by using Structural Equation Model (SEM). The results of the IPA for Metropolitan users show that the categories need improvement are number of bus stops, number of intersections, headways, waiting times for boarding and traffic signal operations in order. On the other hand, Non-Metropolitan uses show that the categories need improvement are traffic signal operations, waiting times for boarding, headways, bus exclusive lanes and number of intersections that is in reverse order to Metropolitan users.

• Journal of Aerospace System Engineering
• /
• 제17권4호
• /
• pp.87-94
• /
• 2023

This paper addresses the installation and modification design of airframe structures for new and modified equipment installations that are essential for aircraft performance improvement. Typical performance improvement equipment mounted on the exterior of the aircraft include antenna, radar, electro-optical/infrared (EO/IR), and self-protection system equipment, which require structural reinforcement, modification, and mounting design of the green aircraft for operation. In the interior of the aircraft, console and rack structures are modified or added according to user operation requirements. In addition, this is accompanied by the installation design of equipment to be replaced and added for performance improvement, and the according modification of environmental control system components for internal cooling. The engineering process and cases in which airworthiness was verified through the detailed design of airframe structures with structural integrity, operability, and maintainability of performance-improved aircraft are presented.