• 한국임상약학회지
• /
• 제25권1호
• /
• pp.27-33
• /
• 2015

Background: Since November 2012, some of over-the-counter (OTC) medications have been sold in convenience store without pharmacist' s supervision. We purposed to examine if the product labels of OTCs provide sufficient information that is appropriate for consumers who may have low health literacy. Methods: We compared the difficulty of words that are utilized in pharmaceutical product labels of interest (intervention) with those in the $6^{th}$ grade textbook (control). Pharmaceutical products of interest were comprised of 13 OTCs which have been sold currently in convenience stores. We grouped words into the 4 levels of difficulty based on the Korean Vocabulary Classification for Education, and statistically tested words frequency in each level between OTCs and control. Results: The 13 OTC labels included lay language (easier or equal to language used in primary school) about 10% less; professional language about 10% more (p < 0.001 in all). Labels for analgesics had the longest and most difficult information, followed by common cold preparations, muscle pain relievers as plaster or cataplasma and digestives. Conclusion: The 13 OTC labels might fail to provide appropriate information for safety use by consumers in terms of the difficulty level of words. The improvement of labels of OTC medications and consumer education strategies are called for safety use of OTC medications sold in convenience stores.

• 한국안전학회지
• /
• 제35권5호
• /
• pp.86-94
• /
• 2020

Portable ladders are normally used both as an access tool for ascending and descending and as a platform for high place work. Though convenient, such usages make the portable ladders vulnerable to fall accidents. For this reason, many safety systems such as regulations and certifications are implemented to prevent fall accidents of portable ladders. However, nevertheless of those safety systems in Korea, annual death tolls of ladder fall accidents has remained high, and which suggests modification and improvement of the portable ladder related safety systems in Korea. The aim of this study is to propose directions for improving safety systems to effectively prevent fall accidents of portable ladders. To this end, comparative analysis on safety systems implemented in Korea and other countries including Japan, USA and UK are conducted to investigate the problems of Korean safety systems. Based on the analysis, limitations of Korean safety systems to prevent ladder fall accidents are discussed and tasks to overcome the limitations are proposed. Once implemented, the proposed tasks would contribute to prevent ladder fall accidents effectively.

• 한국컴퓨터정보학회논문지
• /
• 제23권11호
• /
• pp.167-173
• /
• 2018

The Korean government announced its goal of commercializing autonomous vehicle by year 2020. With such changes, it is expecting to decrease car accident mortality by half. To commercialize autonomous car, not only worries on safety of autonomous vehicle has to be solved but at the same time, institutional system has to be clear to distinguish legal responsibilities in case of accident. This paper will present the legal improvement direction of the introduction of autonomous vehicles as follows. First, it is necessary to re-establish concept of 'driver' institutionally. Second, it is appropriate to focus on Level 3 autonomous vehicle which is about to be commercialized in year 2020 and organize legal responsibility. Third, we should have a clear understanding on how level 3 autonomous vehicle will be commercialized in the future. Fourth, it is necessary to revise The Traffic Law, Act on Special Cases concerning the Settlement of Traffic Accident, and Automobile Accident Compensation Security Law in line with level 3 autonomous vehicle. Fifth, it is necessary to review present car insurance system. Sixth, present Product Liability Law is limited to movable products (Article 2), however, it is necessary to include intangible product which is software. Seventh, we should review on making special law related to autonomous car including civil, criminal, administrative, and insurance perspectives.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2003년도 추계학술대회
• /
• pp.173-183
• /
• 2003

The articles of food is very important things to human. Since PL Law came into effect in July of the last year(2002) in Korea, many domestic firms have taken great interests in PL. And the purpose of PL Law is to provide a means for those injured by defective products to receive redress. Additionally, enterprises get to place more importance on the safety of the products, which led to improvement in competitiveness and enhancement in quality. Consequently customers can get better products. So, it aims not only to compensate the injured by defective products but also to act an incentive to maker $s^pliers of food to make their products more safe. Therefore, this study was aiming to analyze the expected risks to articles of food after the enforcement of PL Law, and to establish a defending plan.an.

• 한국안전학회지
• /
• 제28권2호
• /
• pp.26-30
• /
• 2013

The purpose of this study is to find risk factors by analyzing the operation principle of a photo coupler (P/C) used to remove the noise of electronic devices and establish a base for the performance improvement of developed products. It was found from the P/C circuit analysis of normal products that they were equipped with an electrolytic condenser of $0.1{\mu}F$ to smooth system signals. Due to the epoxy resin packing the external part of the P/C, this study experienced a limit to visually examine the damage to it. It could be seen from the analysis of electric characteristics of the P/C that the forward voltage ($V_f$) and reverse current ($I_r$) were 1.3 V and 10 uA, respectively. In addition, it is required that the breakdown voltage (VCE) between the collector (C) and emitter (E) be maintained at less than 35 V. The and of the damaged product #1 were comparatively good. However, the measurement of was 100.0 uA. From this, it is thought that a short circuit occurred to the internal circuit. Moreover, from the fact that the of the damaged product #2 was open circuit and the measurement of was 0.0 uA, it is thought that the collector and emitter was separated or insulation resistance was significantly high. Furthermore, from the fact that the of the damaged product #3 was open circuit and the measurement of was 0.0 uA, it is thought that the space between the collector (C) and emitter (E) failed to meet the design standard or that they were separated. Therefore, it is thought that fabricating the P/C by increasing the reverse current 10 mA to 50 mA will prevent its malfunction.

• 한국산업보건학회지
• /
• 제32권1호
• /
• pp.41-52
• /
• 2022

Objectives: This study intends to review the impact on cleaning workers and suggest directions for improvement by reviewing the legal and institutional ways in which Article 86 Nos. 7 and 16 of the Enforcement Decree of the Occupational Safety and Health Act work on the maintenance and promotion of cleaning workers' health. Methods: The following laws and systems were reviewed and considered: First, the occupational safety and health legislation obligated or required to be applied to protect the health of cleaning workers; Second, the status of control of chemicals or mixtures used at cleaning sites through the Consumer Chemicals Product and Biocide Safety Control Act; Third, Control of consumer products according to foreign material safety data sheet related laws. Results: Legal and institutional measures necessary to protect the health of cleaning workers include the legal control of harmful substances to be controlled, work environment monitoring, and special health examinations. The application of the Consumer Chemicals Product and Biocide Safety Control Act does not satisfy the legal and practical level of health maintenance and promotion required by the Occupational Safety and Health Act, and the communication of chemical information is insufficient. Overseas, there are restrictions on the use of consumer products in the workplace without material safety data sheets. Conclusions: It is necessary to improve the system to ensure the health of workers handling consumer chemical products. The remaining laws and regulations exempted from the obligation to prepare material safety data sheets should be additionally reviewed.

• 대한안전경영과학회지
• /
• 제16권3호
• /
• pp.351-362
• /
• 2014

A prerequisite for improving the quality of a product is to enhance the quality of its parts supplied from outsourced enterprises. An enterprise certified by ISO 9001 Quality Management System is expected to develop their effective quality assurance system and maintain it through continuous control and improvement, thereby ensuring the good quality of products that they produce. However, it is reported that small and medium-sized enterprises certified by ISO 9001 have difficulty establishing an effective quality assurance system. This study aims to propose a new method of improving a quality assurance system that can be more effective in small and medium-sized enterprises. This study collectively considered requirements specified in several international standards on quality system and the results of expert group brainstorming to identify evaluation areas and items for assessing a quality assurance system. Based on these evaluation areas and items, a set of checklists for diagnosing and improving a quality assurance system was developed. In order to demonstrate the usefulness of the proposed method, this study applied it to ten small and medium-sized enterprises and could identify four approaches for improving their current quality assurance system. The presented improvement method, which consists of establishment of quality goals and quality innovation plan, defective products corrective activities, 4M and design change process, improvement of customer quality information management, is expected to be utilized as a useful tool for the enhancement of the quality assurance system of small and medium-sized enterprises.

• 대한안전경영과학회지
• /
• 제15권1호
• /
• pp.293-301
• /
• 2013

The purpose of this study is to introduce the limit of previously used six sigma quality process evaluation metrics, $Z_{st}$ and $P_{pk}$, and a solution to overcome this drawback by using a metric based on performance evaluation of Z-factor quality innovation. Case analysis on projects from national six sigma contest from 2011 to 2012 is performed and literature review on new drug development HTS (High Throughput Screening) is used to propose innovative performance evaluation metrics. This research shows that experimental study on six sigma evaluation metric, $Z_{st}$ and $P_{pk}$, have no significance difference between industrial type (Manufacturing, Semi-Public Institute, Public Institute) and CTQ type (Product Technology Type CTQ, Process Technology Type CTQ). Following discovery characterize this quality improvement as fixed target type project. As newly developed moving target type of quality innovation performance metric Z-Factor is used for evaluating experimental study, hypothetical analysis suggests that $Z_{st}$ and $P_{pk}$ share different relationship or even show reciprocal relationship. Constraints of the study are relatively small sample size of only 37 projects from past 2 years and conflict on having interview and communication with six sigma quality practitioner for qualitative experimental study. Both moving target type six sigma innovation project and fixed target type improvement project or quality circle enables efficient ways for a better understanding and quality practitioner use by applying quality innovation performance metric. Downside of fixed target type quality performance evaluation metric, $Z_{st}$ and $P_{pk}$, is presented through experimental study. In contrast, advantage of this study is that high throughput requiring product technology, process technology and quantum leap typed innovation effect is evaluated based on precision and accuracy and Z-Factor that enables relative comparison between enterprises is proposed and implemented.

• Design & Manufacturing
• /
• 제8권2호
• /
• pp.41-45
• /
• 2014

Automated polishing apparatus based on the research have been developed. The research is improvement of polishing process for surface quality and uniformity improvement of preform injection mold core. Surface quality of preform core have influence on ejecting and product quality after injection molding. Thus, the current being made by hand to automate the polishing process, the surface of the preform to improve the quality and uniformity improvement. First made a division by analyzing manual process a step-by-step. And draw a mechanism for converting mechanical movement. Automated polishing apparatus for preform core was developed, through which shortens production time and were able to secure the safety of the worker.

• 해양환경안전학회지
• /
• 제26권3호
• /
• pp.277-285
• /
• 2020

Recently, studies have been actively conducted on seismic design and improvement of the seismic performance of bridges, buildings, factories, and plants. In particular, heavy items that are being manufactured or waiting to be shipped from factories (such as generators, engines, and boilers) must be equipped with seismic stoppers to prevent them from moving or falling during an earthquake. Seismic stoppers should be suitably determined by the size and weight of these heavy items; however, they have no general design standard. In this study, structural analyses and seismic tests were conducted to evaluate the performance of newly designed seismic stoppers. Structural analysis was performed on three stopper models to estimate the external load at which the yield stress of the material was not exceeded. Based on the analysis results, a seismic test of the stopper was carried out in accordance with the AC156 test method. Finally, product specifications for all three seismic stopper models were determined and their static/dynamic load performance was evaluated.