• 한국디지털정책학회:학술대회논문집
• /
• 한국디지털정책학회 2005년도 추계학술대회
• /
• pp.231-242
• /
• 2005

The purpose of this study is to generate a proper regulation improvement direction of the public IT project contract law through the current four contract methods and three methods of the awarding party of a contract method. The research method for this paper is derived from the written materials of the present public IT project contract law. Two problems have been processed in order to produce the results: the current contract methods and the awarding party of a contract method. The current contract methods consist of a competition contract, a private contract, and a supply methodology contract. The methods of the awarding party of a contract display a qualified evaluation regulation, the 2nd step competition bid, a standard cost separation tender, and a contract by a negotiation. The results exhibit that the general competition contract consists of four improvement items. The contract by a negotiation contains five improvement items. The group private contract has one improvement item. And the private contract includes one improvement item. These results implicate that the current public IT project contract law demands better improvement work for the ubiquitous Korea.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1784-1788
• /
• 2003

For the improvement of geometrical accuracy in end milling, cutting method and cutting condition selection are investigated in this paper. As machining processes are composed of several steps such as roughing, semi-finishing. and finishing, cutting forces and tool deflection are calculated considering surface shape generated by the previous cutting. The effects of tool teeth numbers, tool geometry, and cutting conditions on the form error are analyzed. Using the from error prediction method from tool deflection, cutting condition for geometrical accuracy improvement is discussed. The characteristics and the difference of generated surface shape in up and down milling are dealt with and over-cut free condition in up milling is presented. The form error reduction method by alternating up and down milling is also suggested. The effectiveness of the presented method is examined from a set of cutting tests under various cutting conditions. This research contributes to cutting process optimization for the geometrical accuracy improvement in die and mold manufacture.

• 기술발표회
• /
• 통권2006호
• /
• pp.185-192
• /
• 2006

In this study the case of ground improvement by CGS as injection method were analyzed in order to find out effect of behavior of sandy soil and the application of this method as ground improvement. The study were analyzed N value after CGS work of sandy soil by many sites test. Considering that increase of N value, CGS can be considered as an effective method to increase the bear capacity as well as constrain the settlement of soft ground From the results of this study, N value after CGS work of sandy soil were closed to N value of ground and relative density(Dr), improvement ratio(As) of grouting and the study will be done continuously for finding out relation of them

• 대한본초학회지
• /
• 제32권3호
• /
• pp.9-17
• /
• 2017

Objectives : Kyeongok-go has the effect of antioxidant, anti-cancer, improving fatigue, and hyperlipidemia, but it is not easy to use in clinical practice becausee of the complicated manufacturing process of heat control and moisture control. The aim of this study was to explore the lipid improvement effect of new manufacturing methods prodeced Kyeongok-go in hyperlipidemia rats. Methods : The SD rats were divided randomly into 8 groups of six animals each : Normal rats (Nor), hyperlipidemia rats (Con), hyperlipidemia rats treated with Spirulina 60 mg/kg(SP60), hyperlipidemia rats treated with Commercial Kyeongok-go 1 g/kg (K0), hyperlipidemia rats treated with Kyeongok-go manufactured by heating mantle 1 g/kg (K1), hyperlipidemia rats treated with ginseng fermentation Kyeongok-go 1 g/kg (KF), hyperlipidemia rats treated with Kyeongok-go with black ginseng 1 g/kg (BK), hyperlipidemia rats treated with black ginseng fermentation Kyeongok-go 1 g/kg (BKF). The experimental group induced hyperlipidemia by eating high cholesterol diet for 8 weeks. Also, we compared Kyeongok-go manufacturing method using the new method compared with traditional method. Results : As a result, the improvement effect of hyperlipemia using the new method showed the similar or better improvement effect compared with the conventional method, and it is considered that the Kyeongok-go manufacturing method using the new method can be substituted for the traditional Kyeongok-go manufacturing method. Conclusion : In conclusion, these results suggest that new manufacturing methods prodeced Kyeongok-go has the potential as a anti-hyperlipidemia material which possess lipid improvement activities.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2338-2343
• /
• 2007

The practical studies on the method of particle contamination control for yield enhancement in the cleanroom were carried out. The method of the contamination control was proposed, which are composed of data collection, data analysis, improvement action, verification, and implement control. The partition check method for data collection and data analysis was used in the cellular phone module production lines. And this method was evaluated by the variation of yield loss between before and after improvement action. In case that the partition check method was applied, the critical process step was selected and yield loss reduction through improvement actions was observed. From these results, it is concluded that the partition check method is effective solution for particle contamination control in the cleanroom production lines.

• 한국수자원학회논문집
• /
• 제40권7호
• /
• pp.503-510
• /
• 2007

현재 하천정비는 하천생태계에 초점을 맞추고 자연하천에 근접할 수 있는 공법을 사용하는 자연 친화적인 하천정비가 비약적으로 늘어나고 있다. 하지만 자연 친화적인 하천정비는 아직까지 많은 기술이 축적되지 않아 어떤 공법이 하천환경에 적합한 공법인지가 확립되어 있지 않은 상태이다. 또한, 값비싼 공법을 적용하여 하천을 자연 친화적으로 정비하였다. 하더라도 하천정비에 대한 종합적인 평가방법이 확립되어있지 않아 자연 친화적 하천정비에 대한 타당성을 객관화하지 못하고 있다. 따라서 하천환경기능을 포함한 종합적이고 다양한 평가방법을 개발하여 정비하천에 대한 평가를 수행할 필요가 있다. 본 연구에서는 자연 친화적으로 정비된 하천에 대해 정비의 타당성과 효율성을 평가하는 평가방법에 대해 연구하였다. 전라북도 순창읍에 있는 경천을 대상으로 2000년${\sim}$2000년 월별로 모니터링을 수행하여 자료를 수집하였으며, 수집된 자료를 분석하여 하천환경기능을 종합적으로 고려할 수 있는 방법으로서 하천자연도 평가, 전 과정 평가, 어메니티 평가, 경제적 편익 평가 등의 평가방법을 개발하였다. 본 연구에서 개발한 4가지의 평가방법은 하천정비사업의 종합적이고 정량적인 평가를 수행할 수 있는 방법으로 판단된다. 하지만 하나의 하천을 대상으로 개발된 방법을 적용하였기 때문에 차후 각 하천마다 갖는 특성을 고려하여 하천정비의 평가방법이 요구된다.

• 한국음향학회지
• /
• 제31권7호
• /
• pp.480-486
• /
• 2012

음향 변환기용 외부 회로를 구성할 때, 파워 앰프의 내부저항이 매우 작은 경우 정합 회로를 구성하기 보다는 부하측의 역률을 개선하는 것을 선호 한다. 기존 연구의 결과를 살펴 보면 광대역에서 최대 파워를 전달하게 하는 정합회로를 구하는 방법을 많이 연구되어 왔으나, 두 개의 공진점을 갖는 광대역 전기 음향 변화기에 적용할 만한 광대역 역률 개선용 튜닝 회로를 구성하는 방법은 논문화된 결과는 드물다. 본 논문에서는 기존의 정합회로 설계에서 사용하는 체비세프 설계법을 기본으로 하여, 좀 더 낫은 결과를 가질 수 있도록 하는 복합 최적화 과정을 제안한다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.659-666
• /
• 2004

Dynamic compaction has evolved as an acceptable method of site improvement by treating poor soils in situ. The method is often an economical alternative for utilizing shallow foundations and preparing subgrades for construction when compared with conventional solutions. In general, the installation purpose of dynamic compaction are to increase bearing capacity and decrease differential settlement within a specified depth of improvement. This method involves the s systematically dropping large weights onto the ground surface to compact the underlying ground. The weights used on dynamic compaction projects have been typically constructed of steel plates, sand or concrete filled steel shells, and reinforced concrete. Typically, weights range from 5-20 ton and base configurations are, circular or octagonal. In this study, the effective depth of improvement is evaluated based on the numerical analysis code, the dynamic analysis of FLAC-3D program, in order to analyze the influence parameters ; ground conditions, maximum applied load and the area of compaction plate.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2005년도 춘계학술대회
• /
• pp.273-278
• /
• 2005

Prescribed according to the occupational safety and health low noise measurement method was changed to personal sampling in the method to measure an area noise. Such method had the limit which did not evaluated characteristic of sound of occurrence and the place of origin. This study was performed to establish an engineering remedy of the work-place noise. The subject was a vibration control process of the place of business in Pusan. A simulation program applied for an engineering improvement of the work-place noise. The results were as follows: 1. An noise occurrence level of the work-place before improvement was $88^{\sim}97dB(A)$, We applied an improvement method to be established and were expected to $80^{\sim}119dB(A)$. 2. The level of the noise-distribution to appear in the place of origin of the work-place before improvement was $90^{\sim}93dB(A)$ but, We executed the simulation after applied an engineering remedy and predicted $80^{\sim}85dB(A)$. A result of the simulation blue part was changed mostly into the dark blue color. The results suggest that simulation program establishes an engineering remedy and is useful to the case to apply.

• 대한안전경영과학회지
• /
• 제7권2호
• /
• pp.57-64
• /
• 2005

Prescribed according to the occupational safety and health low noise measurement method was changed to personal sampling in the method to measure an area noise. Such method had the limit which did not evaluated characteristic of sound of occurrence and the place of origin. This study was peformed to establish an engineering remedy of the work-place noise. The subject was a vibration control process of the place of business in Pusan. A simulation program applied for an engineering improvement of the work-place noise. The results were as follows: 1. An noise occurrence level of the work-place before improvement was $88^{\sim}97dB(A)$, We applied an improvement method to be established and were expected to $80^{\sim}l19dB(A)$, 2. The level of the noise-distribution to appear in the place of origin of the work-place before improvement was $90^{\sim}93dB(A)$ but, We executed the simulation after applied an engineering remedy and predicted $80^{\sim}85dB(A)$. A result of the simulation blue part was changed mostly into the dark blue color. The results suggest that simulation program establishes an engineering remedy and is useful to the case to apply.