• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.357-360
• /
• 2003

Improvement is required to solve problems depending on long term use of signal equipment in the existing city railroad and to raise quality of passenger services. Accordingly, for more efficient improvement, we examined the procedure of executing construction of the communication based train control system in Korean city railroads, which is globally studied. The procedure of executing construction of the system is to present a plan for construction first of ail and then to prepare a strategy for construction of the system. It is required to establish a procedure for execution in each step depending on the prepared strategy and then to establish a detailed execution plan. We studied such an execution procedure, divided the execution procedure for application of the train control system through five steps to prepare the execution procedure.

• Journal of Korean Society for Quality Management
• /
• v.29 no.4
• /
• pp.18-37
• /
• 2001

On this research, recognizing that ship inspection and audit services are closely related in Improving ship safety, the importance of active quality managements of ship inspection and audit services have been notified. For this research, based on previous research results, Quality managements of ship inspection and audit services were divided into the following aspects; the source of quality managements, execution of quality managements and outcome of quality managements. The results of this study is as follows. Overall, it is clearly shown that the elements of quality managements execution such as management responsibilities, resource management., product realization, measurement and analyzation, and improvement had also acted as a mediator between the relation of quality managements source and outcome.

• Journal of Korean Society for Quality Management
• /
• v.50 no.3
• /
• pp.373-386
• /
• 2022

Purpose: This study proposes the application of Six Sigma management innovation method for more systematically enhanced execution of Quality by Design (QbD) activities. QbD requires a deeper understanding of the product and process at the design and development stage of the drug, and it is very important to ensure that no fault is fundamentally generated through thorough process control. Methods: Analyzing the background and specific procedures of quality improvement based on the drug design basis, and analyzing the key contents of each step, we have differentated and common points from the 6 Sigma methodology. We propose a new model of Six Sigma management innovation method suitable for pharmaceutical industry. Results: Regulatory agencies are demanding results from statistical analysis as a scientific basis in developing medicines to treat human life through quality improvement activities based on drug design. By utilizing the education system to improve the statistical analysis capacity in the Six Sigma activities and operating the 6 Sigma Belt system in conjunction, it helped systematically strengthen the execution power of quality improvement activities based on pharmaceutical design based on the members of the pharmaceutical industry. Conclusion: By using QbD Six Sigma, which combines quality enhancement based on pharmaceutical design basis and Six Sigma methodology suitable for pharmaceutical industry, it is possible to obtain satisfactory results both by pharmaceutical companies and regulators by using appropriate statistical analysis methods for preparing scientific evidence data required by regulatory.

• IEIE Transactions on Smart Processing and Computing
• /
• v.4 no.6
• /
• pp.450-454
• /
• 2015

Short execution time is the major performance factor for computer systems. This performance factor is directly determined by code quality, which is influenced by the compiler's optimizations. However, a compiler has limitations when optimizing source code due to insufficient information. Thus, if programmers can learn the reasons why a compiler fails to apply optimizations, they can rewrite code that is more easily understood by the compiler, and thus improve performance. In this paper, we propose a compiler that provides a programmer with reasons for failed optimization and recognizes programmer's additional information to obtain better optimization. As a result, we obtain performance improvement, i.e., reducing execution time and code size, by taking advantage of additional optimization opportunities.

• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.3 s.37
• /
• pp.31-37
• /
• 2006

The existing tunnel survey method contains many problems of taking much measuring time, increasing construction expenses, and delaying a term of construction. Therefore the site survey system for an improvement efficiency is developed. This system will be able to solve the ewer factor and the problem of curtailment of time and expenditure. In order to solve these problems it connected a measurement equipment and a notebook computer, and developed the system which simultaneously with tunnel measurement it will be able to decide locations and errors from site at real-time. The development or the tunnel survey system minimize the error occurrence as measuring tunnel, and the probability of more or less excavation. Therefore this site survey system leads to the effect of the improvement execution quality of work, the cost reduction and the construction term reduction.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.11a
• /
• pp.130-131
• /
• 2018

The main purpose of this study is to analyze the importance of the construction work of apartment buildings. The construction work operation was divided into five major tasks, which include: Schedule Control (P'1 - P5) Construction Management (C'1 - C'5), Environmental Management (E'1 - E'3), and Quality Management. Finally, this study derived major construction execution tasks through correlation between construction work and the original index and t-test.

• Journal of KIBIM
• /
• v.5 no.3
• /
• pp.19-32
• /
• 2015

For decades, the productivity issue has been a primary concern for the all stake-holders who participate in domestic construction industry. Especially, between a whole life cycle of building, the construction phase's productivity problem makes or break the entire project. In this respect, the general construction company, who accept the order and construct the building(so called General Contractor), should consider various strategies, such as schedule management, cost management, quality management, inner-crew management, etc., for the productivity improvement., and almost of these management methods have been studied for a long time. But, the researches and studies about the specialty contractor, who construct the building directly in construction site were not sufficiently complete yet. This research begins as an idea which tries to apply the BIM(Building Information Modeling) into the tasks of Specialty contractors for their productivity improvement. And for the effective application of construction BIM to specialty contractors, establish of the BIM project execution plan for them, not the fragmentary adoption of BIM. Therefore, in this paper, we develop the BIM project execution plan for the reinforced concrete companies who conduct the framework construction which located on CP(Critical Path) Especially, we model the "Construction BIM Use List for the RC Work", "BIM Application Master Process" and "BIM Application Detailed Process", and general contractor who use these BIM uses list and process models can manage various specialty contractors about schedule, cost, earned value, quality, safety and environment management systematically.

• Journal of Software Engineering Society
• /
• v.29 no.1
• /
• pp.1-6
• /
• 2020

Recently, software has taken up an increasing share of the weapons system. The software development environment is also becoming very diverse. In the field of weapons software, software technical documents, source codes, and execution files are standardized as defense standards material. Through defense standards, the software file lists and development environments for creating software execution files are required to be documented. However, additional efforts to rebuild the software development environment are needed to recreate the software execution file based on defense standards material after the end of R&D. Therefore, in this study, we propose an improvement method for the quality of software standards material using virtualization technology. This is expected to reduce efforts to rebuild the software development environment and solve problems caused by discontinuation of the development environment.

• Journal of Korean Society for Atmospheric Environment
• /
• v.25 no.6
• /
• pp.579-593
• /
• 2009

Several fine particle-related policies in Northeast United States were investigated in support of the execution of special measures to improve air quality of Seoul Metropolitan Area (SMA). The definition of particulate matter (PM) in the Clean Air Act (CAA), components and procedures of Regional Haze Rule (RHR), and Air Quality Management (AQM) were reviewed. Several State Implementation Plans (SIPs) were also reviewed as the way to attain required air quality under the Clean Air Act. $PM_{2.5}$ attainment SIP of Maryland, 8-hr Ozone attainment SIP of New Jersey, and Regional Haze Rule attainment SIP of MANE-VU were analyzed in detail as case studies. We realized that "Special Measures for Air Quality Improvement in the Seoul Metropolitan Area" has many similarities with its US counterparts in terms of purpose, components, procedures, and implementation methods. US policies, however, have more advanced features, such as standardized procedures and methods, transparent guidelines, and stable relationship among federal/state/local governments and stakeholders, which would be helpful to improve air quality in SMA.

• Quality Improvement in Health Care
• /
• v.18 no.1
• /
• pp.27-36
• /
• 2012

Objectives : A protocol called "critical pathway" was developed to standardize the management of hospital patients the day after they underwent gamma knife radiosurgery. The quality of improvement in patient outcomes was evaluated. Methods : Critical pathway was developed, according to the regulations of the I hospital, by analyzing the medical records of 22 inpatients who underwent gamma knife surgery within the period from January to April 2011 on the day of the surgery. The study included a group of 22 patients admitted to the hospital the day after they underwent gamma knife radiosurgery, between July and September 2011. The control group included 22 patients who had surgery employing the same method within the period from May to June 2011. To measure the effects on quality improvement, the average length of stay, the execution rate of the hospital discharge notice system, daily hospital revenue, and the satisfaction of the patients and the medical team were assessed. The patient questionnaire employed a four-point Likert scale while the medical-staff questionnaire employed a five-point Likert scale. Result : The average length of stay was significantly shorter in the study group compared to the control group (2.3 days vs. 3.8 days, P<0.05). The execution rate of the hospital discharge notice system was higher in the study group (100% vs. 72%) than in the control group. Daily hospital revenues were higher by 264,178 Korean won in the study group when compared to the control group. The study group showed greater satisfaction of patients compared to the control group based on a four-point Likert scale (P<0.05). The study group showed greater satisfaction in medical team compared to the control group based on a five-point Likert scale (P<0.05). Conclusion : The development and implementation of a critical pathway protocol for hospital admission the day after gamma knife radiosurgery is an effective care process that improves the clinical quality.