• Journal of Agricultural Extension & Community Development
• /
• v.9 no.2
• /
• pp.263-277
• /
• 2002

The objective of this study was to compare the farm efficiency of members of cooperative firms with that of non-members in Korea. Data were collected from 27 farms members of three cooperatives and 13 non-member farms, based on the managerial achievements of 1999. For the analysis, the data were divided into three different farming types: type I and II of member farms and non-member farms. Economic analysis were implemented using DEA(Data Envelopment Analysis). Major findings was as follows. Total average technology efficiency was 0.782, which implies that there still remains 21.8% of improvement possibility. Among the three types, type I showed the highest technology efficiency of 0.9055, while type II and non-member farms showed 0.7670 and 0.7171, respectively. This means that these farms have relatively high potential improved. Also, comparing technology efficiency by dividing into pure technology and scale efficiency, all type of the farms exhibit a higher pure technology efficiency compared to scale efficiency. Therefore, to improve current technology efficiency, farms need to focus more on pure technology efficiency improvement. Meanwhile, profit analysis based on farm size indicate that most of the farms demonstrated the increasing-return-to-scale, which means it is necessary to extend the farm size to improve technical efficiency. Type I member farms achieve higher profit and efficiency than other two types and relatively higher producer prices through introducing cooperative sorting, grading and packing. Also, these labor saving technologies increased farm size.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.10 no.1
• /
• pp.42-52
• /
• 2011

The importance of education and training facilities and education facilities on the relationship between effective as demonstrated in many studies can be very big. In this study, the status of existing school facilities improvement project is done individually, based on the systematic integration of the improvement project was to evaluate the feasibility. Furthermore, it was based on looking for ways to effectively pursue. Training School Facilities Improvement Program to be competitive, the country continued to be pursued systematically and very large scale as a whole must be a great national project. So much to promote efficient business environment, quality of education for children with detractors of the national budget to ensure efficient and most importantly in terms of economic investment that can be. In this study, the proposed K-TEGS existing school facilities, such as the development of techniques for the assessment based on this effort to promote an efficient business should be done on a continuous basis.

• Journal of KSNVE
• /
• v.11 no.2
• /
• pp.276-284
• /
• 2001

In apartment buildings, floor-impact sound has been regarded as the major source that causes complaints from residents. It is mainly due to the use of light-weight structures and the lack of researches in terms of floor-impact sound. The purposes of this study are analyzing the characteristics of vibration response and sound radiation of 12type void slabs in the improvements void slab by impedance method and finding the fittest improvements void slab on the 12type void slab. The main results of this study are summarized as below: (1) In the $\frac{1}{3}$ octave band level of sound radiation, $\frac{1}{3}$ octave band levels, measured from four-divided improvement void slab(No.8) and eight-divided improvement void slab(No.12), are 10~25 dB lower than that of standard void slab(No.1) in the 1250 Hz. Especially, eight-divided improvement void slab(No.12) is the best void slab in terms of radiation efficiency of sound level. (2) In the correlation relation of acceleration and sound radiation, standard void slab(No.1), four-divided improvement void slab(No.8), SK standard four-hole void slab(No.10), and eight-divided improvement void slab(No.12) are positive correlation relation.

• Journal of the Semiconductor & Display Technology
• /
• v.13 no.2
• /
• pp.29-35
• /
• 2014

In this study general solar cell production process was complemented, with research on improvement of solar cell efficiency through surface structure and thermal annealing process. Firstly, to form the pyramid structure, the saw damage removal (SDR) processed surface was undergone texturing process with reactive ion etching (RIE). Then, for the formation of smooth pyramid structure to facilitate uniform doping and electrode formation, the surface was etched with HND(HF : HNO3 : D.I. water=5 : 100 : 100) solution. Notably, due to uniform doping the leakage current decreased greatly. Also, for the enhancement and maintenance of minority carrier lifetime, antireflection coating thermal annealing was done. To maintain this increased lifetime, front electrode was formed through Au plating process without high temperature firing process. Through these changes in two processes, the leakage current effect could be decreased and furthermore, the conversion efficiency could be increased. Therefore, compared to the general solar cell with a conversion efficiency of 15.89%, production of high efficiency solar cell with a conversion efficiency of 17.24% was made possible.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.31 no.2
• /
• pp.81-88
• /
• 2023

SHM (Structural Health Monitoring) technique for monitoring aircraft structural health and damage, EHM (Engine Health Monitoring) for monitoring aircraft engine performance, and APM (Application Performance Management) is used for each function. APMS (Airplane Performance Monitoring System) is a program that comprehensively applies these techniques to identify the difference between the performance manual provided by the manufacturer and the actual fuel mileage of the aircraft and reflect it in the flight plan. The main purpose of using APMS is to understand the performance of each aircraft, to plan and execute flights in an optimal way, and consequently to reduce fuel consumption. First, it is to check the fuel efficiency trend of each aircraft, check the correlation between the maintenance work performed and the fuel mileage, find the cause of the fuel mileage increase/decrease, and take appropriate measures in response. Second, it is to find the cause of fuel mileage degradation in detail by checking the trends by engine performance and fuselage drag effect. Third, the APMS is to be used in making maintenance work decisions. Through APMS, aircraft with below average fuel mileage are identified, the cause of fuel mileage degradation is identified, and appropriate corrective actions are determined. Fourth, APMS data is used to analyze the economic analysis of equipment installation investment. The cost can be easily calculated as the equipment installation cost, but the benefit is fuel efficiency improvement, and the only way to check this is the manufacturer's theory. Therefore, verifying the effect after installation and verifying the economic analysis is to secure the appropriateness of the investment. Through this, proper investment in fuel efficiency improvement equipment will be made, and fuel efficiency will be improved.

• 한국IT서비스학회:학술대회논문집
• /
• 2007.11a
• /
• pp.679-684
• /
• 2007

This paper proposes a scheme to estimate the technical efficiency of trucks in logistics as performance measure by Data Envelopment Analysis (DEA). The result of technical efficiency estimation shows that there exists a substantial opportunity for improvement in technical efficiency of trucks and also the heterogeneity in the technical efficiency among trucks.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.6
• /
• pp.895-906
• /
• 2018

The improvement project for school zone in Korea is occurring mostly in kindergartens and elementary schools in which children are mainly active, and is being promoted as part of measures to prevent children's traffic accidents. However, since the study on the essential installation facilities and proper level of safety facilities for School zone is lacking, this study relatively evaluated the efficiency of safety facility installation using DEA (Data Envelope Analysis) and suggested improvement plan. We built the facilities and incident data for 28 school zones in Hwaseong City. Six major facilities (Raised intersection, Raised crosswalk, Protective fence, Skid Proof, Speed hump, Speed cameras) that have proven to be effective in the preceding research were analyzed as input factors. As a result of the analysis, only 12 out of 28 showed efficiency and 16 out of efficiency. Effective groups of school zones were found to have fewer installed Protective fences, Skid Proof, and Speed cameras installations than school zones classified as ineffective groups. Protective fences were found to be efficient even if only 47% of the total extension of the school zone was installed, and the number of slip prevention facilities was 8.7 per square km. The number of subjects to be compared is 28, so this study is limited to use as a relative efficiency evaluation index, and it can be grouped into nationwide units and efficiency evaluation can be done for each group.

• Korea Journal of Hospital Management
• /
• v.13 no.3
• /
• pp.69-93
• /
• 2008

Rising healthcare cost is a global phenomenon that justifies governments' introduction of 'incentive regulation' plan for the improvement of hospital efficiency. A number of previous studies tried to evaluate the efficiency of healthcare organization by using Data Envelopment Analysis(DEA), a common efficiency benchmarking method. However, there is a concern that this kind of efficiency evaluation could induce "quantity-quality trade-off". Moreover, as quality aspect is especially important in terms of 'effectiveness' of health care, it should be considered in efficiency evaluation of healthcare organization. A number of different models were tried so far to incorporate quality aspect into DEA, however, none is universally recognized as a standard. Thus, in this study, previous quality-incorporating DEA models were categorized into 6 types according to the way of incorporating quality aspect, and strengths and limitations of each type were reviewed with a set of artificial data as an example. Based on this review, a new quality-incorporating efficiency evaluation model, named Quality-adjusted output DEA(QAO-DEA), was suggested. As an exploratory empirical analysis, technical efficiency of human resource were measured with different quality-incorporating DEA models, using 2004 data from National University Hospitals. In conclusion, Quality-adjusted output DEA(QAO-DEA) model seems to be one of the most desirable alternatives to incorporate quality aspect in efficiency evaluation of hospital, and deserves the consideration as a policy tool to induce simultaneous improvement of both efficiency and quality.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.1 s.45
• /
• pp.205-217
• /
• 2007

The purpose of this paper is to measure and analyze the efficiency of management in general bank. Each bank was analyzed to find out the efficiency and classified as efficient and inefficient bank. To the inefficient bank, the inefficient part and the extent are round out, the improvement methods of efficiency are suggested, and the effects of scale of bank on management efficiency by BCC model are analyzed. And, the differences between commercial bank and local bank also are examined. Empirical main results are as follows: Frist, After 2000, both of commercial and local bank shows the continuous improvement of the management efficiency. Second, the relative efficiency of management of commercial bank is higher than local bank except 2004. Third, there are differences in variables except equity ratio and no differences appeared in the management efficiency between commercial bank and local bank. Fourth, there are no influences or negative influences by M&A and reconstruction among banks in the effect of scale to the management efficiency.

• JOURNAL OF ELECTRICAL WORLD
• /
• no.7 s.103
• /
• pp.6-9
• /
• 1985