• 재활복지
• /
• v.20 no.1
• /
• pp.211-233
• /
• 2016

The purpose of this study is to figure out problems and to suggest improvement scheme by examining 31 of the disabled who used power wheelchair developed for safe moving and standing support. The results are as follows. First, standing power wheelchair that enables the disabled to sit and stand up was developed. It can also be used as means of transportation for moving in narrow space and in a short distance. In the usability test of this prototype, two groups were respectively examined in 60 evaluation items. One group consisted of 16 people with disabilities using manual wheelchairs. And the other one consisted of 15 people with disabilities using automatic wheelchairs. The entire average figure of two groups was shown to be 2.72 and standard deviation was 0.820. Specifically, the average figure of the group in manual wheelchair was 2.85 and the one of the other group in automatic wheelchair was 2.57. And both group replied that the move to stand up and sit on both types of wheelchair was the most inconvenient thing. It shows why ergonomic design for persons with under extremity disabilities to stand up and sit is needed. Second, with further study based on the results of usability test of the disabled, it will make contribution to increase the quality of people with disabilities by helping them move and do daily lives on their own.

• Tunnel and Underground Space
• /
• v.28 no.6
• /
• pp.692-705
• /
• 2018

Ground vibration is one of the remarkable issues in tunnel blasting. In recent studies, to improve the fragmentation with reduction of ground vibration in tunnel blasting, a vibration-controlled blasting method with artificial cutting slot near the center-cut holes has been suggested. This study examines the effect of the different arrangement of artificial cut-slot on the vibration reduction and fragmentation by performing the full-scaled concrete block blast experiments and the numerical simulations with 3D-DFPA. The results show that the existence of artificial slot contributes to the improvement of vibration reduction, blast fragmentation and the efficiency of the cutting slot blast. It can be explained that the artificial slot play a free surface role and should decrease the burden between the cut holes. Crater volumes of the blasted concrete blocks were measured by 3-dimensional digital image analysis and compared with the ideal standard crater volume which can be calculated by theoretical standard blast design method. As a result, the ratio of burden and hole diameter which should achieve the standard crater in the cut-hole blasting were suggested.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.65-70
• /
• 2019

The purpose of this study is to understand the college students' needs for software curriculum which based on surveys from educational satisfaction of the software lecture evaluation, as well as to find out the improvement plan by applying the text content analysis method. The research method used the text content analysis program to calculate the frequency of words occurrence, key words selection, co-occurrence frequency of key words, and analyzed the text center and network analysis by using the network analysis program. As a result of this research, the decent points of the software education network are mentioned with 'lecturer' is the most frequently occurrence after then with 'kindness', 'student', 'explanation', 'coding'. The network analysis of the shortage points has been the most mention of 'lecture', 'wish to', 'student', 'lecturer', 'assignment', 'coding', 'difficult', and 'announcement' which are mentioned together. The comprehensive network analysis of both good and shortage points has compared among key words, we can figure out difference among the key words: for example, 'group activity or task', 'assignment', 'difficulty on level of lecture', and 'thinking about lecturer'. Also, from this difference, we can provide that the lack of proper role of individual staff at group activities, difficult and excessive tasks, awareness of the difficulty and necessity of software education, lack of instructor's teaching method and feedback. Therefore, it is necessary to examine not only how the grouping of software education (activities) and giving assignments (or tasks), but also how carried out group activities and tasks and monitored about the contents of lectures, teaching methods, the ratio of practice and design thinking.

• Journal of the Korean Orthopaedic Association
• /
• v.53 no.6
• /
• pp.466-477
• /
• 2018

Orthopaedics is an area where 3-dimensional (3D) printing technology is most likely to be utilized because it has been used to treat a range of diseases of the whole body. For arthritis, spinal diseases, trauma, deformities, and tumors, 3D printing can be used in the form of anatomical models, surgical guides, metal implants, bio-ceramic body reconstruction, and orthosis. In particular, in orthopaedic oncology, patients have a wide variety of tumor locations, but limited options for the limb salvage surgery have resulted in many complications. Currently, 3D printing personalized implants can be fabricated easily in a short time, and it is anticipated that all bone tumors in various surgical sites will be reconstructed properly. An improvement of 3D printing technology in the healthcare field requires close cooperation with many professionals in the design, printing, and validation processes. The government, which has determined that it can promote the development of 3D printing-related industries in other fields by leading the use of 3D printing in the medical field, is also actively supporting with an emphasis on promotion rather than regulation. In this review, the experience of using 3D printing technology for bone tumor surgery was shared, expecting orthopaedic surgeons to lead 3D printing in the medical field.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.12
• /
• pp.105-113
• /
• 2018

In this study, the engineering properties including bearing capacity of subgrades stabilized with a binder are analyzed by laboratory and field experiments. The main components of the binder are CaO and $SO_3$. After the binder was mixed with a low plasticity clay, the passing rates were relatively decreased as the sieve mesh size increased. Not only did the soil type change to silty sand, but engineering properties, such as the plasticity index and modified California bearing ratio (CBR), were improved for the subgrade. A comparison of the compaction curves of the stabilized subgrade and field soil compacted with the same energy demonstrated an increase of approximately 6% in the maximum dry unit weight, slight decrease in optimum moisture content, and considerable increase improvement in grain size. In the modified CBR test, the effect of unit weight and strength increase of the modified soil (with a specific amount of binder) was remarkably improved. As the proportion of granulated material increased after the addition of binder, the swelling was reduced by 3.3 times or more during initial compaction and 6.5 times by final compaction. The unconfined compressive strength of the specimens was maintained at the homogeneous value with a constant design strength. The stabilized subgrade was validated by applying it in the field under the same conditions; this test demonstrated that the bearing capacity coefficients at all six sites after one day of compaction exceeded the target value and exhibited good variability.

• The Journal of Korean Academy of Sensory Integration
• /
• v.17 no.1
• /
• pp.9-18
• /
• 2019

Objective : This study investigated the effect of intensive weight shift training (IWST) on the ability to balance in a sitting posture of children with spastic cerebral palsy (SCP). Methods : One child with spastic diplegia participated in this study for a total of 8 weeks using the ABA experimental design. For the pre-intervention period (A1), general physical therapy (GPT) for children with SCP was performed. The intervention period (B1 and B2), GPT and IWST were conducted for children with SCP, and GPT was conducted again for the post-intervention period (A'1 and A'2). Trunk control capacity was measured using the Korean Trunk Control Measurement Scale (TCMS-K) and Biorescue (RM Ingenierie, France). Results : All TCMS-K variables increased from A1 to B2, and decreased from B2 to A'2. The total area with limit of stability (LOS) increased from A1 to B2, and decreased from B2 to A'2. The ratio of the left/right (Lt/Rt) and anterior/posterior (Ant/Post) LOS area was closer to 1, meaning symmetry, in B2 than in A1. The ratio of the Lt/Rt LOS area decreased further from 1 in A'2 than in B2. The ratio of the Ant/Post LOS area was closer to 1 in A'2 than in B2. Conclusion : IWST had a positive effect on the improvement of balance in the sitting posture of a child with SCP. The results suggest that IWST might help to improve the balance abilities of children with SCP for independent sitting, postural control, and activities of daily living.

• Journal of Korean Physical Therapy Science
• /
• v.26 no.1
• /
• pp.61-68
• /
• 2019

Purpose: This study was to examine the differences in muscle activities for some muscles of the legs used in a broad jump after applying tape to healthy people. The purpose of this study was to improve the exercising ability of patients and athletes during the rehabilitation training. Design: Randomized Controlled Trial. Methods: The experimental group was attached with the Kinesio tape on Rectus femoris, Biceps femoris and Gastrocnemius. Before doing broad jumping, they had stretching with the following order. And we measured broad jumps five times. We gave the rest period between trials. After every trial was measured, they were performed to cool-down exercise with the same way of warm-up exercise. And the control group did the same exercises as the experimental group except for attaching the Kinesio tape on muscles. Results: The results of Rectus femoris, Biceps femoris and Gastrocnemius activities according to tape application of femoris muscle were significantly increased (p<.05) compared to untreated group. Conclusion: Therefore, Kinesio tape has an effect on the improvement of the broad jump recorded by affecting the increase in muscle activities.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.247-251
• /
• 2014

As smart education increases the demand for new teaching-learning methods, teacher training colleges need to systematize smart education teaching-learning methods for pre-service teachers. This study designed a smart education teaching-learning model, which is applicable to pre-service teachers, by analyzing the smart education teaching-learning types for primary and secondary schools at national and international levels and by analyzing the Creation Teaching Learning Assessment (CTLA) model. The goal of smart education is to reinforce capability of learners. The smart education teaching-learning model designed to help pre-service teachers reinforce their smart literacy is suitable for reinforcing capability of future learners to receive smart education. The smart education teaching-learning model in this study was designed as a 15-week teaching plan applicable to pre-service teachers at teacher training colleges. In the teaching-learning model, problem-based learning (PBL), a situated learning model, and cooperative learning model were applied to weekly instructions. Further research should be conducted to prove its effectiveness in allowing pre-service teachers to reinforce their smart literacy by making gradual improvement in this model and to develop and test smart education teaching-learning models constantly.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.1
• /
• pp.27-35
• /
• 2019

The existing middle-long span railway bridge has been mainly applied to steel box girder bridges. However, the steel box girder bridges have disadvantages in securing the space under the bridge, and the main girder is made of a thin plate box shape, resulting in a ringing noise due to the vibration. Many complaints about noise have been raised. For this reason, there is a need for the development of long railway bridges that can replace steel box girder bridges. In this paper, the characteristics of the steel composite railway bridge currently developed were introduced and a time history analysis was conducted using MIDAS Civil reflecting the speed of KTX load for 40m and 50m bridges. In addition, from the analysis results, the dynamic behavior of target bridges were verified and it was examined whether they meet the dynamic performance criteria proposed in the railway design standards. As a result, all of the bridges under review satisfied the dynamic safety criteria, however, in case of 40m of span, the vertical acceleration value was very large. In order to solve this problem, authors proposed the improvement plan and corrected the cross section to confirm that the vertical acceleration decreased.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.3
• /
• pp.359-367
• /
• 2019

The purpose of this study was to investigate the effects of ingestion of rabies and ginseng fruit extracts on alcohol hangover, liver damage protection, fatigue recovery, and physical strength improvement. A total of 64 volunteers aged over 20 were participated in this study and the randomized and repeated measures design method was used to divide a group of participants with a random assignment. All participants were divided into 4 groups (n=16) treated with hoveni dulcis thunb extract + ginseng berry extract (ARI 1000), hoveni dulcis thunb extract, ginseng berry extract, and placebo. As a result of respiratory alcohol concentration change, the group treated with ARI 1000 was significantly lower than the group treated with hoveni dulcis thunb extract, ginseng berry extract, and placebo in 1 hour of drinking, and significantly lower than the placebo group in 2 hours and 3 hours of drinking (p<0.05). After 2 and 3 hours of alcohol consumption, blood alcohol concentration of the group treated with rabies ARI 1000 was significantly lower than those of the other 3 groups (p <0.05). In conclusion, ingestion of ARI 1000 before drinking may significantly reduce the respiratory and blood alcohol concentrations, which may induce an effect on the hangover effect.