• 전기학회논문지
• /
• 제65권1호
• /
• pp.58-64
• /
• 2016

In this paper, the design of rotor shape was performed for improvement of start-up characteristics and efficiency in single-phase LSPM. In order to improve the start-up characteristics, shape of rotor aluminium cage bar was changed. Through arrangement of permanent magnets and installation of flux barriers, it was performed torque ripple reduction and efficiency improvement. Cogging torque and back-EMF is calculated by the no-load analysis, start-up time is calculated by the start-up state analysis, efficiency and torque ripple is calculated by steady state analysis. The characteristics of the motor were calculated through FEM.

• 한국CDE학회논문집
• /
• 제17권3호
• /
• pp.164-174
• /
• 2012

The recent introduction of BIM technology has raised the interest on the BIM quality assurance and management more than ever. This study aims to consider the ways of BIM quality improvement by analyzing the most frequent issues rising from multiple BIM projects. For this purpose, the 12 test models from BIM education program hosted by buildingSMART Korea are investigated based on the requirements in the public BIM guidelines. All the BIM issues generated are categorized by the criteria applied and analyzed for each kind of building element. The results showed that more than half of the issued at least could be cleared out by improving modeling habits and technical guides.

• 전기학회논문지
• /
• 제57권9호
• /
• pp.1536-1545
• /
• 2008

In this paper, we research a new method for efficiency improvement of a single-phase Induction motor by minimization of the stator loss. To make this, we perform winding design which is based on balanced and quasi-balanced operation condition. It gives efficiency improvement greatly but poor starting torque simultaneously. To obtain the best efficiency improvement maintaining the maximum and starting torque, the optimal winding specification and rotor dimension is determined with variation of secondary resistance, running capacitor and turn ratio. Finally, this paper gives the comparison between the simulation results and experimental results.

• International Journal of Quality Innovation
• /
• 제2권2호
• /
• pp.24-33
• /
• 2001

As we know, the quality of processes is technically depicted by variation, a product or process with the best quality must naturally require the variation as less as possible. The variation is usually reduced with many ways, say, by adjusting parameters settings under robust design with many turns expensive experiments. So ones are trying to reach the robustness by detecting cheap and simple methods. In this paper, a both practical and simple technique for quality improvement, namely reducing the variation, by data classification is studied. First, all possible system factors are included, which may dominate the variation law. And then we make use of the past observations and their classification as well as boxplot charts to find out the internal rule between the variation and the system factor. Next, adjust the location of the system factor according to the rule so that the variation could, to some extent, be lessened. Finally, two typical quality improvement cases based on data classification are presented.

• 한국IT서비스학회지
• /
• 제7권2호
• /
• pp.223-242
• /
• 2008

We assess service delivery system for outpatients of general hospital(A) using service blueprint. Service blueprint for outpatients' service process currently being implemented in general hospital(A) is analysed to improve hospital services and define hospital service delivery system more accurately. In addition, comparative analysis of service blueprint between before and after improvement is conducted to find that health care services Is now more customer-oriented and hospital employees can link their duties to service delivery system. Dealing with the efficiency of health care service delivery system based on service blueprint analysis is expected to pave the way for continual service quality improvement of general hospitals in the future. The analysis of service blueprint of outpatients' service process suggested in this study is useful for setting strategies for health care service. It also helps service process design and service digitalization of other general hospitals in the future.

• 한국자동차공학회논문집
• /
• 제5권6호
• /
• pp.192-201
• /
• 1997

The feedback control scheme of the pressure control system of the rear wheel steering gear which has relatively large volume and sprung load was built up in order to improve th response characteristic of the system. The control algorithm chosen was a feedback compensator joined by a feedfoward compensator and the model matching method was used in the process of control system design. The structures and properties of the reference models were inspected and the parameters of the controller were decided. The improvement of the response characteristic of the pressure control valve by means of the feedback control is affirmed. Particularly, when the order of the system model is higher than the 2nd order, the effectiveness of the feedback control on the improvement of the response characteristic of the valve is distinct. And the convenience of the model matching method is the process of control system design is confirmed as well.

• 한국건축시공학회지
• /
• 제11권6호
• /
• pp.576-586
• /
• 2011

In recent years, pollution in residential spaces has been a significant area of concern. In particular, the indoor air quality (IAQ) of an apartment building before occupancy, which is related to the interior material, is a serious problem. Unlike previous research, which has mainly focused on pollution control after construction, this study has derived influencing factors and priority of management with a controlling schedule for IAQ. The objectives of this research are 1) control of schedule or improvement of management for IAQ, 2) distribution of responsibility to the parties concerned (factory, material company, construction company, design and engineering, occupancy). The results show the relative priority of the four major items in wall?based apartment buildings and in column?based apartment buildings. An analysis of the parties responsible for improvement based on the IAQ results shows more efforts to improve IAQ are needed in material factories and engineering/design companies.

• 한국CDE학회논문집
• /
• 제8권3호
• /
• pp.133-140
• /
• 2003

This paper describes a Multi-step Digitizing Method and Reverse Model generation algorithm for improvement of reverse engineering accuracy. Reverse engineering is the process of reproducing computational model by directly extracting geometric information on the physical objects. For the improvement of measuring data accuracy, we propose a multi-step digitizing method. First, measuring cloud-of-point by use of a laser scanning system. Second, gathering digitizing data by a scanning touch probe. Fine digitizing plan generated from coarse surface model directly from the cloud-of-point and it allows CMM more accurate scanning data. Finally in this paper we propose the algorithm of generating NURB surface from more accurate measuring points.

• 전기학회논문지
• /
• 제58권2호
• /
• pp.363-368
• /
• 2009

In the paper, we confirmed improvement Noise figure of the entire RF front-end using spiral inductor with PGS(Patterned Ground Shield) and current bleeding techniques. LNA design is to achieve simultaneous noise and input matching. Spiral inductor in input circuit of LNA inserted PGS for betterment of Q-factor. we modeling inductor using EM simulator, so compared with inductor of TSMC 0.18um. We designed and simulation the optimum structure of PGS using Taguchi's method. We confirmed enhancement of noise figure at LNA after substituted for inductor with PGS. Mixer designed using current bleeding techniques for reduced noise. We designed LNA using inductor with PGS and Mixer using current bleeding techniques, so confirmed improvement of noise figure.

• Geomechanics and Engineering
• /
• 제36권4호
• /
• pp.329-341
• /
• 2024

Retaining structures are one of the most important elements in the stabilization of excavations and slopes in various engineering projects. Mechanically stabilized earth (MSE) walls are widely used as retaining structures due to their flexibility, easy and economical construction. These benefits are especially prominent for projects built on soft and weak foundation soils, which have relatively low resistance and high compressibility. For high retaining walls on weak foundations, conventional design methods are not cost-effective. Therefore, two alternative solutions for different foundation weakness are proposed in this research: optimized multi-tiered MSE walls and single tier wall with foundation improvement. The cost optimization considers both the construction components and the land price. The results show that the optimal solution depends on several factors, including the foundation strength and more importantly, the land price. For low land price, the optimized multi-tiered wall is more economical, while for high land price (urban areas), the foundation improvement is preferable. As the foundation strength decreases, the foundation improvement becomes inevitable.