• Journal of Korean Society for Quality Management
• /
• v.47 no.2
• /
• pp.283-294
• /
• 2019

Purpose: Although the development of bulletproof helmets continues to be carried out, little has been improved in testing methods. Therefore, in this study, we studied the improvement of the test method of the domestic bulletproof helmet. Methods: The causes of head damage in the battlefield and the trends of bulletproof helmet development in developed countries were analyzed. In addition, improvements were derived by comparing the test methods of bulletproof helmet in Korea and the United States. Results: The results of the improvement by comparing the test methods of bulletproof helmet in Korea and the United States are as follows First, it is an addition to the scope of environmental treatment. Second, it is an addition to the level of protection. Third, the addition of the level of protection by impact. Conclusion: This study considered testing methods to prevent head injuries to shocks that cannot be identified by conventional methods. In addition, it considered testing methods for various threats by improving protection performance to advanced countries' levels.

• Journal of the Korean Geosynthetics Society
• /
• v.18 no.4
• /
• pp.151-165
• /
• 2019

In this study, the four types of improvement methods (increase self weight and reducing sliding force etc.) were proposed depending on install location with compaction grouting to improve seismic performance of existing port structure and optimal methods by analyzing the effects of improvement (stability, constructability and economy) by theoretical and numerical methods. From the dynamic time history analysis for artificial seismic waves, the results indicated that the horizontal displacement after improvement decreased compared to before improvement, however the displacement reduction effect among improvement methods was not significantly different. Slope stability based on the strength reduction method and the limit equilibrium analysis method, it is confirmed that the passive pile method is more safe than other methods. It is due to the shear strength at the failure surface is increased. In addition, the analysis of constructability and economy showed that the reduction of earth pressure method (type 02) and the passive pile method (type 03) are excellent. However, in the case of the passive pile method is concerned that there is a shortage of design cases and the efficiency can be reduced depend on various constraints such as ground conditions.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1608-1614
• /
• 2009

In recent days, the study of urban regeneration has been conducting with purposeful and sincere intent starting out with the residential environment improvement works. Within the range of urban regeneration, the low-cost housing technology means development of totally-integrated housing technology that may be applied to the regeneration project, especially for the rundown areas where infrastructure facilities in the urban zone have been degraded and obsoleted. In line with this, among many and varied methods in order for realization of the low-cost housing as a part of urban regeneration project, this study should like to propose an improvement methods of the key technologies in relation to the construction works by type of work with which construction costs (directing cost) would be reduced. And, in order to elicit the method for element technology that has been developed and improved in the most optimal manner centering on the selected construction work by the type of work, the researcher conducted comparative review of summary of element technologies related to the construction works concerned, characteristics, and construction method thereof. In particular, the researcher investigated the expenses (construction cost and labor cost), constructions (contractibility and productivity), safety, quality of works, and the technical status in environmental aspects, and the researcher also conducted analyses and evaluations thereof.

• Journal of Korean Society for Quality Management
• /
• v.36 no.4
• /
• pp.37-46
• /
• 2008

There are big differences in six sigma projects between manufacturing processes and transactional/service processes. This paper analyzed the differences between the two areas by examining 18 six sigma case studies in Korean companies. To characterize six sigma case studies, step-by-step questions and check criteria were developed based on 12 step DMAIC methodology. On the basis of those characterized data, the differences between two areas were analyzed. Significant differences were found in the number of CTQs, validation of measurement systems, methods to determine improvement objectives, the methods to elicit improvement plans and types of control systems. The most significant difference was that statistical tools were widely used in manufacturing processes, but qualitative tools were used in transactional/service processes during improvement phase.

• Journal of Korean Society for Quality Management
• /
• v.43 no.2
• /
• pp.127-140
• /
• 2015

Purpose: To obtain the area for improvement, the Importance-Performance analysis(IPA) uses relatively simple questions, that is, satisfaction and importance at attribute level. However, no attempt has been made to consider the gap between own company's performance and those of competitors in IPA, in the field of quality management. This study is aimed to suggest a new prioritizing method for improvement and to test for validity of the proposed technique. Methods: This study used data collected from Song and Lim(2015), which is satisfaction of employees, customers and competitors as well as importance data for 7 quality attributes of K animal hospital. A correlation comparison with other priority methods such as Bacon(2003)'s model and Matzler and Hinterhuber(1998)'s QI index is conducted. Results: The priority results by the proposed method shows better in correlation coefficient with customer perceived priority for improvement than other methods. Conclusion: From the result of the current study, it can be concluded that the result of the proposed method is valid, while it is relatively easy to understand and analyze, and therefore no additional survey is necessary for improvement priority.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.8
• /
• pp.261-270
• /
• 2014

As Internet traffic increases recently, much effort has been put on improving the performance of a web server. In addition to hardware side solutions such as replacement by high-end hardware or expansion of the number of servers, there are software side solutions to improve performance. Recent studies on these software side solutions have been actively performed. In this paper, we identify performance degradation problems occurring in a conventional TCP networking reception process and propose a way to solve them. We improve performance by combining three kinds of existing methods for Linux Networking Performance Improvement and two kinds of newly proposed methods in this paper. The three existing methods include 1) an allocation method of a packet flow to a core in a multi-core environment, 2) ITR(Interrupt Throttle Rate) method to control excessive interrupt requests, and 3) sk_buff data structure recycling. The two newly proposed methods are fd data structure recycling and epoll_event data structure recycling. Through experiments in a web server environment, we verify the effect of our two proposed methods and its combination with the three existing methods for performance improvement, respectively. We use three kinds of web servers: a simple web server, Lighttpd generally used in Linux, and Apache. In a simple web server environment, fd data structure recycling and epoll_event data structure recycling bring out performance improvement by about 7 % and 6%, respectively. If they are combined with the three existing methods, performance is improved by up to 40% in total. In a Lighttpd and an Apache web server environment, the combination of five methods brings out performance improvement by up to 36% and 20% in total, respectively.

• Journal of the Korea Furniture Society
• /
• v.15 no.2
• /
• pp.1-17
• /
• 2004

This paper attempted to review measuring methods of formaldehyde emission from wood-based panel products. Methods included for the discussion were desiccator methods, extraction method, and various chamber methods. First, the procedures and testing conditions of 24-hour desiccator method was critically reviewed, and an improvement of this method was proposed to meet international standards. Two different small chamber methods ($20\ell$ and $1m^3$ chamber methods) were also compared in terms of their advantages and disadvantages. In addition, the regulation levels of formaldehyde emission of wood-based composite panels were compared for different countries. The selection of a reference method of measuring formaldehyde emission of wood panel products should consider the ease of conducting test and cost required. Results should be exchangeable for different methods.

• Journal of Welding and Joining
• /
• v.24 no.2
• /
• pp.42-47
• /
• 2006

While it is known that the weld toe grinding method may give 3.4 times of fatigue strength improvement, this improvement may significantly vary according to weld bead shapes and loading modes. Although tremendous interest have been given in improving fatigue strength improvement for ship structures, quantitative results are yet in need. In this context, a series of fatigue tests is carried out for a type of test specimen that are typically found in ship structures. Weld burr grinding is carried out using a electric grinder in order to remove surface defects and improve the weld bead profile. The test results are compared with the same type of test specimen without applying the fatigue improvement technique in order to obtain a quantitative measure of the fatigue strength improvement. On the other hand, both hot spot stress and structural stress methods are employed to compare the effectiveness of the two methods in evaluating the fatigue strength improvement of welded structures.

• Geotechnical Engineering
• /
• v.12 no.2
• /
• pp.115-132
• /
• 1996

Several soil improvement methods are applied to stabilize soft ground. But, their improvement effects are known to be reduced in view of strength and durability under poor conditions such as marine clay and the ground with the flow of groundwater. The soil improvement method is generally classified as mixing(high pressure) type and injection type, and in this study, for successflll'applications of gelling methods, first in case that mixing method with cement is applied to marine clay, the causes of strength inferiority of treated soil are analyzed, and the effectiveness of improvement is studied, second in case that injection method with water-glass chemical grouts is applied to the ground with the flow of groundwater, soil improvement effects and durability of grouted soil are studied.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.1
• /
• pp.19-25
• /
• 2018

Objective: In practical breeding, selection is often performed by ignoring the accuracy of evaluations and applying economic weights directly to the selection index coefficients of genetically standardized traits. The denominator of the standardized component trait of estimated genetic evaluations in practical selection varies with its reliability. Whereas theoretical methods for calculating the selection index coefficients of genetically standardized traits account for this variation, practical selection ignores reliability and assumes that it is equal to unity for each trait. The purpose of this study was to clarify the effects of ignoring the accuracy of the standardized component trait in selection criteria on selection responses and economic weights in retrospect. Methods: Theoretical methods were presented accounting for reliability of estimated genetic evaluations for the selection index composed of genetically standardized traits. Results: Selection responses and economic weights in retrospect resulting from practical selection were greater than those resulting from theoretical selection accounting for reliability when the accuracy of the estimated breeding value (EBV) or genomically enhanced breeding value (GEBV) was lower than those of the other traits in the index, but the opposite occurred when the accuracy of the EBV or GEBV was greater than those of the other traits. This trend was more conspicuous for traits with low economic weights than for those with high weights. Conclusion: Failure of the practical index to account for reliability yielded economic weights in retrospect that differed from those obtained with the theoretical index. Our results indicated that practical indices that ignore reliability delay genetic improvement. Therefore, selection practices need to account for reliability, especially when the reliabilities of the traits included in the index vary widely.