• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.902-904
• /
• 1996

In this paper, we proposed the reasonable design standard and countermeasures of Demand Factor for large office buildings, that was made by the statistical way considering actual conditions, such as investicated electric equipment capacity, electric power consumption, etc. So as to save electric equipment investment, the decrease of power loss, the improvement of facilities utilization and the decrease of electric rates, we can be contributed by the application of the design standard. The result of saving effect is showed to confirm the practical use of the proposed Demand Factor, and also, it is believed that this proposed Demand Factor will be useful in electric equipment operation and planning.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.35-38
• /
• 2008

In this paper, study noise performance of LNA to enhance Q-factor of input circuit by patterned ground shield is inserted inductor using TSMC 0.18um. Applied LNA technology is cascode method. The input matching circuit was constituted on-chip and wirebonding inductor. Taguchi's method is used for the best suited structure of PGS. We confirmed enhancement of Q-factor by inserted PGS into inductor. The input matching circuit enhanced Q-factor by inductor with PGS improve noise figure of LNA.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.5
• /
• pp.463-469
• /
• 1998

Factor analysis was applied as a multivariate statistical technique to official genetic evaluations of type classification traits for 1,265,785 Holstein cows and 10,321 sires computed from data collected between August 1982 and June 1994 in Canada. Type traits included eighteen linear descriptive traits and eight major score card traits. Principal components of the factor analysis showed that only five factors explain the information of the genetic value of linear descriptive traits for both cows and sires. Factor 1 included traits related to mammary system, like texture, median suspensory, fore attachment, fore teat placement and rear attachment height and width. Factor 2 described stature, size, chest width and pin width. These two factors had a similar pattern for both cows and sires. In constrast, Factor 3 for cows involved only bone-quality, while in addition for sires, Factor 3 included foot angle, rear legs desirability and legs set. Factor 4 for cows related to foot angle, set of rear leg and leg desirability, while Factor 4 related to loin strenth and pin setting for sires. Finally, Factor 5 included loin strength and pin setting for cows and described only pin setting for sires. Two factors only were required to describe score card traits of cows and sires. Factor 1 related to final score, feet and legs, udder traits, mammary system and dairy character, while frame/capacity and rump were described by Factor 2. Communality estimates which determine the proportion of variance of a type trait that is shared with other type traits via the common factor variant were high, the highest ${\geq}$ 80% for final score, stature, size and chest width. Pin width and pin desirability had the lowest communality, 56% and 37%. Results indicated shifts in emphasis over the twelve-year period away from udder traits and dairy character, and towards size, scale and width traits. A new system that computes fmal score from type components has been initiated.

• Korean Journal of Construction Engineering and Management
• /
• v.3 no.4 s.12
• /
• pp.93-103
• /
• 2002

The reinforcement concrete work is the work affected by structural safety, durability, and schedule with form work. The domestic reinforcement concrete works have mainly worked the process of re-barfabrication/assembly on site. Finally it have low productivity. Then this paper analyzed waste factors and the process of re-bar fabrication/assembly on site for the productivity improvement and value-added productivity improvement. Waste factor analysis aims at maximizing value-added by the value analysis of re-bar fabrication and assembly on site. Finally, Value-AddingActivity(VAA)ismuchlessthan non-value adding activity. Especially, Non-Value-Adding Activity(NVAA) generates waste such as the activity steps, labors, equipments, materials, time, and soon. And it was non-flow production, over production, and analyzed into having to shift value. This paper aimsat maximizing value-addingactivity and minimizingnon value-addingactivity through waste factor analysis in process for the improvement of value added productivity.

• Quality Improvement in Health Care
• /
• v.4 no.2
• /
• pp.230-240
• /
• 1997

Background : Hypercholesterolemia is a major independent risk factor of coronary heart disease. Practice guidelines for management of hypercholesterolemia had been made in several developed countries. This study was undertaken to assess the effect of practice guideline reminders and flow-sheets to improve the quality of management of hypercholesterolemia. Methods: Practice guideline reminders and flow-sheets based on National Cholesterol Education Program Adult Treatment Panel II guidelines, were placed on the office desks of outpatient department of family medicine at the Asan Medical Center. Before this intervention, we educated the doctors to use these reminders and flow-sheets. The charts of all patients who had cholesterol levels greater than or equal to 240 mg/dl during 4 months before and after introduction of reminders and flow-sheets, were reviewed retrospectively. We compared the performances of physicians about management of hypercholesterolemia between pre-intervention period and post-intervention period. Results: The detection rate of hypercholesterolemia in post-intervention period was increased to 83.2% compared by 71.5% in pre-intervention period. Risk factor analysis for coronary heart disease increased significantly from 16.9% to 68.7%. Adequacy of management was 19.2% in pre-intervention period and 78.0% in post-intervention period. It showed statistically significant improvement in management of hypercholesterolemia. Conclusion : This study suggested that practice guideline reminders and flow-sheets were the effective methods in improving the quality in management of hypercholesterolemia.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.2
• /
• pp.117-133
• /
• 2017

The purpose of this study is to consider the relation between the deciding factors of local identity and local image improvement. To achieve this purpose, the deciding factors of local identity have been set as the following four: historical identity, cultural identity, (nature) scenery identity, and industrial identity. The writer has established a model to represent the relation between these factors and the local image improvement, namely 'Visitor Satisfaction' and 'Revisit Intentions', and framed a hypothesis for empirical verification. The study results are as follows: First, the deciding factors of local identity which this study addressed are empirically proven to have a significant effect on the visitor satisfaction and the intention to revisit in which is it likely that the greater the impact of the deciding factors, the higher the visitor satisfaction and revisit intentions would be. Second, the deciding factors of local identity, it appears that the 'historical identity' factor had the largest impact on the visitor satisfaction, and the 'cultural identity' factor had the largest impact on the revisit intentions. Therefore, of the four deciding factors, the 'historical identity' should be considered the highest priority to increase the visitor satisfaction, and the 'cultural identity' should be considered the highest priority to increase the revisit intentions. Third, based on the verification of the relation between the visitor satisfaction and revisit intentions, it can be presumed that the greater the visitor satisfaction, the higher the revisit intentions would be.

• Proceedings of the Korea Database Society Conference
• /
• 2010.06a
• /
• pp.5-12
• /
• 2010

With a sample of 147 Korean small and medium size companies, this study examined the relationships among degree of information orientation, corporate culture, degree of information management implementation and selected business performances in the process of implementing IMS improvement programs, such as IMS(Information Management System). Information orientation is defined as company-wide understanding and implementation of the underlying philosophy, principles, approached, and tools of information improvement programs. It is assumed that successful implementation of information improvement programs requires a information-oriented mind-set of the employees. The key elements of information orientation include continious improvement structured processes, organixation-wide participation and customer-focused spirit. Culture id defined as the value and beliefs of em organization that shape its behavior. It is also assumed that successful implementation of information improvement programs require strong support from s corporate culture that emphasizes cintinious improvement. Adopting the competing values model of Quinn and McGrath(1985), corporate culture is classified into 'flexible' versus 'controlled culture' and 'outer-directed' versus 'inner-directed culture'. Fitness was defined through the relationship between levels of information oriented and types of corporate culture. The results were as follows. First, it was found that when a company with high information orientation promoted information innovation programs, such as IMS, it reported higher degree of information management implementation and improvement in business performances. Second, the results showed the importance of 'flexible culture' and 'outer-directed culture' in performing information, innovation. Regarding the types of corporate culture, the analysis found that developmental culture, rational culture and group culture were effective. Third, companies with high information oriented and flexible culture or companies with high information orientation and outer-directed culture reported the highest implementation in Information management activities. Fourth, the results showed that the level of information management implementation had a mediating effect on the relationship between information orientation and business performance. It was also found that enhanced non-financial performance led to the improvement of financial performance. This study attempted to exaime the factor that lead information management program to success. In order to reach success, first, it is suggested that companies have positive mind set toward continious information improvement. Secondly, it is recommended that a flexible and outer-directed culture appropriate for continious information improvement is cultivated.

• Journal of Construction Engineering and Project Management
• /
• v.5 no.3
• /
• pp.1-9
• /
• 2015

Project cost is an important concern in any construction project. Although there has been a lot of studies on factors affecting the cost of construction projects, there seems no consensus as what cost factors have direct influence on the cost of civil engineering projects. This study therefore aims to bridge the current knowledge gap by examining quantity surveyors' perception of the factor structure among nineteen costing attributes identified based on literature review. Questionnaire was used to elicit responses from quantity surveyors working in the Hong Kong construction industry. Principal component analysis is conducted to extract the factor structure of the cost attributes and the attributes are grouped into three factor components, namely the contract management factor, the project management factor and the monetary value factor. Understanding these cost impact factors could be crucial in managing civil engineering projects, since it allows the project stakeholders and quantity surveyors to take precautionary steps to identify the cost management problems and areas for improvement and could even help to avoid cost deviations in engineering projects.

• Journal of Korean Society for Atmospheric Environment
• /
• v.30 no.1
• /
• pp.37-47
• /
• 2014

In this study, field measurement was carried out for reasonable improvement of asphalt concrete manufacturing facilities' PM emissions estimation method. Through those, this study calculated PM emission factor and tried to estimate PM emissions from asphalt concrete manufacturing facilities suitable for domestic characteristics. As a result, the efficiency of the PM control device was measured as 99.9%. Using this, uncontrolled PM emission factor was calculated. PM emission factor was calculated 10.97 kg/ton at 23 asphalt concrete manufacturing facilities of 22 workplaces. The PM current emission factor of the US Environment Protection Agency (EPA) is 14.4 kg/ton, the factor calculated from this study is about 24% lower than the EPA standard.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.6
• /
• pp.2707-2712
• /
• 2011

In this paper, a power factor correction (PFC) control circuit using single stage boundary conduction mode(BCM) for the 400V. 120W LED drive application has been designed. The proposed control circuit is aimed for improvement of the power factor correction and reduction of the total harmonic distortion. In this circuit, a new CMOS multiplier structure is used instead of a conventional BJT(bipolar junction transistor) based multiplier where has a relatively large area. The CMOS multiplier can bring 30 % reduced chip area, competitive die cost in comparison with the conventional BJT multiplier.