• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11b
• /
• pp.190-193
• /
• 2005

The air filter in engine intake system filters the dirt in the breathing air but also it attenuates the noise although the phenomenon has been regarded negligible. For the analysis of the acoustical performance of air filter, an acoustical model is suggested in this paper. The air filter consists of a porous filter element, which catches the particulate dirt, and a plastic filter box, which supports the filter element. Fibrous structure of the filter element is modeled as a micro-perforated panel using the flow resistivity and porosity. The pleated geometry of the filter element is modeled as two coupled ducts and a mathematical model is developed for the analysis of sound propagation. The filter box Is modeled as a rigid rectangular box. By combining two models, a 4-pole transfer matrix for the air filter is derived. The transmission loss calculated using the transfer matrix of the suggested model is compared with the measured data. Reasonably good agreement is observed. The result can be improved by considering the visco-thermal effect in modeling, in particular at a frequency range near the troughs of TL curve.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.213-216
• /
• 1998

This paper proposes improved algorithm for multi-user detection in DS-CDMA. Each of algorithm is based on CMA algorithm. Improved LMS-CMS and LMAD-CMA are combined to macthed filter. Simulations results shown that Improved LMAD-CMA algorithm has a higher capacity than MOE in steady-state convergence properties.

• ETRI Journal
• /
• v.25 no.1
• /
• pp.52-54
• /
• 2003

We propose an improved algorithm for detecting audio watermarks based on a spread spectrum in the spectral domain. Since the energy of a watermark is much smaller than that of the cover audio data, pre-processing to reduce the effect of the cover data is needed to reliably extract watermarks. We introduce a spectral envelope filter as a pre-process that enhances detecting performance by filtering out the intrinsic spectral character of cover data. The proposed watermarking structure can be easily included in the compression system and can extract watermarks from partially decompressed spectral data. Our experimental results demonstrate that with a bit error rate of around 10 dB against general attacks, the proposed detecting scheme works better than detectors without the spectral filter.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.2
• /
• pp.154-157
• /
• 2009

In order to give handiness to the management of the existing street lighting system which is based on the one way communication and to reduce the maintenance cost, the power line communication filter in the two way communication which is based on the CDMA communication and power line communication was improved and accordingly the stability of the communication performance was improved. Also, the efficiency of existing street lighting system and smart street lighting system was evaluated as Visual studio system. As a result, when the number of street lights is 10,000, the hours of daily work fell 50% and the number of necessary maintenance staff decreased 40%. Compared to the maintenance costs of the existing street lighting system, it could be expected to have the cut costs of almost 100 million won a year on the basis of 60 switch board and 1,200 street lights.

• The Journal of the Korea Contents Association
• /
• v.4 no.4
• /
• pp.205-213
• /
• 2004

In this paper, we proposed a wavelet phase-only filter modulation synthetic discriminant function joint transform correlator(WPOfSDF-JTC) for scale invariant pattern recognition, and an improved algorithm to reduce the filter synthesis time. Computer simulation showed that the proposed filter has better SNR than CWMF if input image has random noise and the improved synthesis algorithm can reduce the iteration time. We used frequency selective JTC to solve the problem of the optical alignment and eliminate the autocorrelation and crosscorrelation between each input image.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.6
• /
• pp.32-41
• /
• 1996

We propose the improved GMSK (gaussian-filtered minimum shift keying) quadrature modulator using the FIR(finite impulse response )filter whose coefficients are obtained form the differnce of phase response, and design its ASIC (applicaton specific integrated circuit) which can be used for GSM (global system for mobile communication) digital cellular system and DCS 1800 (digital cellular system at 1800MHz) personal communication system. Input data become quantized I and Q channel 10 bit signal through cosine and sine ROM mapping after being filtered by the FIR filter whose normalized bandwidth is 0.3 and designed by considering intersymbol interference as well as sampling ratio. These two signals become the GMSK modulated I and Q channel signal through DAC (digital-to-analog converter) and 7th order analog chebyshev LPF(low pass filter) respectively. The difference between the ideal analog signal and its digitized signal is analyzed in terms of sampling noise, quantization noise, truncation noise and coefficient noise. And the effect of the LPF following the DAC is considered. The ASIC design of the GMSK quadrature modulator is also confirmed by an experiment.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.4
• /
• pp.49-60
• /
• 1997

This paper deals with the effect of coating layer on the fatigue strength of TiN coated 1Cr-1Mo-0.25V steel prepared by using the arc ion plating (AIP) process, in which it was characterized by the presence of extractor grid (ion filter). The rotary bending fatigue tests were carried out under room air conditions, and the fatigue crack initiation and growth bwhavior were observed by using plastic replica method. As experimental results, it was found that the obvious improvement of fatigue life at lower stress region was confirmed in TiN coated specimen processed with ion filter. It was also exlained that the increase of fatigue life in the case of an improved AIP process with ion filter was attributed to the retardation of crack initiation of the substrate surface due to hard coating layer, more densly formed with the reduced size and density of droplets.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.522-522
• /
• 2000

In this paper, two pre-filtering techniques are presented for accurately estimating the impact location of a loose part. The reason why a pre-filterng technique Is necessary in a Loose Part Monitoring System is that the effects of background noise on the signal to noise ratio (SNR) can be reduced considerably resulting in improved estimation accuracy. The first method is to take d moving average operation in the time domain. The second one is to adopt band-pass filters designed in the frequency domain such as a Butterworth filter, Chebyshev filter I & II and an Elliptic Filter. To show the effectiveness, the impact test data (signals) from the YGN3 power plant are first preprocessed and then used to estimate the loose pan impact position. Resultantly. we observed that SNR is much improved and the average estimation error is below 7.5%.

• International Journal of Precision Engineering and Manufacturing
• /
• v.9 no.2
• /
• pp.44-49
• /
• 2008

This paper describes the problem of ultraprecision positioning with a ball screw mechanism in the microdynamic range, along with its solution. We compared the characteristics of two ball screw mechanisms with different table masses. The experimental results showed that the vibration resulting from the low stiffness of the ball screw degraded the positioning performance in the microdynamic range for the heavyweight mechanism. The proposed nominal characteristic trajectory following (NCTF) controller was designed for ultra precision positioning of the ball screw mechanism. The basic NCTF control system achieved ultra precision positioning performance with the lightweight mechanism, but not with the heavyweight mechanism. A conditional notch filter was added to the NCTF controller to overcome this problem. Despite the differences in payload and friction, both mechanisms then showed similar positioning performance, demonstrating the high robustness and effectiveness of the improved NCTF controller with the conditional notch filter. The experimental results demonstrated that the improved NCTF control system with the conditional notch filter achieved ultra precision positioning with a positioning accuracy of better than 10 nm, independent of the reference step input height.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.43-44
• /
• 2006

The performance of the direct adaptive time-delay filter depends on the select time-delay. In this paper, the authors introduce a new scheme to adapt the time-delay which is to be used in conjunction with the direct adaptive command shaping for the improved vibration suppression in flexible motion system. In order to formulate the time-delay adaptation scheme, the authors have analyzed the effect of the time-delay value on the performance of the direct adaptive command shaping filter. By modifying the direct adaptation formula based on the analysis result the authors have established a set of equations to adapt the time-delay toward the optimal value. Simulation results show the effectiveness of the proposed time-delay adaptation approach for the improved vibration suppression.