• Nuclear Engineering and Technology
• /
• v.54 no.9
• /
• pp.3380-3389
• /
• 2022

We evaluated the performance of an improved hybrid median filter (IHMF) applied to X-ray computed tomography (CT) images obtained using a high-resolution photon-counting cadmium zinc telluride (CZT) detector. To study how the proposed approach improves the image quality, we measured the noise levels and the overall CT-image quality. We established a CZT imaging system with a detector length of 5.12 cm and thickness of 0.3 cm and acquired phantom images. To evaluate the efficacy of the proposed filter, we first modeled two conventional median filters. Subsequently, we were able to achieve a normalized noise power spectrum result of ~10^-8 mm², and furthermore, the proposed method improved the contrast-to-noise ratio by a factor of ~1.51 and the coefficient of variation by 1.55 relative to the counterpart values of the no-filter image. In addition, the IHMF exhibited the best performance among the three filters considered as regards the peak signal-to-noise ratio and no-reference-based image-quality evaluation parameters. Thus, our results demonstrate that the IHMF approach provides a superior image performance over conventional median filtering methods when applied to actual CZT X-ray CT images.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.13-16
• /
• 2005

Many mobile communication systems require bandpass filter with sharp skirt characteristics and consequently a filter was formed by more order. It needs to improve flatness in passband. In this paper, amplitude equalizer was used to improve the flatness of passband. We modified Chebyshev prototype filter by use of network synthesis and computed the prototype elements for Shaping filter. We designed and realized a 13-order combline bandpass filter and 4-order amplitude equalizer with coaxial dielectric resonators at WiBro band. The measured results show $\pm$0.82 dB amplitude difference in passband, 6 dB improved flatness.

• Journal of electromagnetic engineering and science
• /
• v.11 no.3
• /
• pp.186-191
• /
• 2011

This paper presents a simple and effective method for improving stopband rejection characteristics of previously studied dual-band filters. Small electric couplings were applied to the symmetrically positioned shunt resonators, which divided each transmission zero into two transmission zeros without any effect on passbands. We were able to achieve improved stopband rejection characteristics by these additional transmission zeros. For the filter application, we designed a dual-band filter with improved stopband characteristics using microstrip quasi-lumped elements. The electric couplings that control the location of transmission zeros are controlled by the distance between symmetric open stubs of the filter. The filter was fabricated with a relative dielectric constant of 3.5 and a thickness of 0.76 mm. The fabricated filter has a small size ($14.6{\times}13.2{\times}0.76$ mm) and a low insertion loss when compared with conventional filters.

• Speech Sciences
• /
• v.11 no.4
• /
• pp.89-97
• /
• 2004

In this paper, an improved network echo canceller is proposed. The proposed echo canceller is based on the LTJ(lattice transversal joint) adaptive filter which uses informations from the speech decoder. In the proposed implementation method of the network echo canceller, the filer coefficients of the transversal filter part in the LTJ adaptive filter is updated every other sample instead of every sample. So its complexity can be lower than that of the transversal filter. And the echo cancellation rate can be improved by residual echo cancellation using the lattice predictor whose order is less than 10. Computational complexity of the proposed echo canceller is lower than that of the transversal filter but the convergence speed is faster than that of the transversal filter. The performance improvement of the proposed echo canceller was verified by the experiments using the real speech signal and speech coder.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.9
• /
• pp.429-434
• /
• 2006

In this paper, detection based - adaptive windowed nonlinear filter(DB-AWNF) is proposed for removing salt-pepper noise in infrared image. This filter is composed of impulse detector and window-size-variable median filters. Impulse detector checks whether current pixel is impulse or not using range function and nonlinear location estimator. If impulse is detected, current pixel is filtered according to four kinds of local masks by use of median filter. If not, current pixel is delivered to output like identity filter. In Qualitative view, the proposed could have removed heavy corrupted noise up to 30% and reserved the details of image. In quantitative view, PSNR was measured. The proposed could have about 12-31[dB] more improved performance than those of median $(3{\times}3)$ filter and 13-29[dB] more improved performance than those of median $(5{\times}5)$ filter.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.4
• /
• pp.989-995
• /
• 2013

Image degradation caused by the impulse noise is generated in the process of image transmission and so on. It has been studied by many researchers in order to remove these noise. The representative impulse noise removal method includes SM filter. Though SM filter will indicate errors by the increasing of impulse noise density. Therefore, in this paper, in order to preserve the edges of the image, and reduce the distortion of the image, an improved adaptive median filter algorithm is proposed. In the simulation results, the algorithm showed excellent results in all several areas, and the PSNR is used as the criterion of evaluation.

• The KIPS Transactions:PartB
• /
• v.17B no.1
• /
• pp.37-46
• /
• 2010

In this paper we have presented a two dimensional model based tracking system using improved chamfer matching. Conventional chamfer matching could not calculate similarity well between the object and image when there is very cluttered background. Then we have improved chamfer matching to calculate similarity well even in very cluttered background with edge and corner feature points. Improved chamfer matching is used as likelihood function of particle filter which tracks the geometric object. Geometric model which uses edge and corner feature points, is a discriminant descriptor in color changes. Particle Filter is more non-linear tracking system than Kalman Filter. Then the presented method uses geometric model, particle filter and improved chamfer matching for tracking object in complex environment. In experimental result, the robustness of our system is proved by comparing other methods.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.212-216
• /
• 2003

The performance of active power filter depends on the inverter characteristic, the control method, and the accuracy of reference signal generator. The accuracy of reference generator is the most critical item to determine the performance of active power filter. This paper introduces a novel reference signal generator composed of improved adaptive predictive filter. The performance of proposed reference signal generator was verified by means of simulation with MATLAB. The simulation result confirm that the proposed reference signal generator can be utilized for the active power filter.

• The Transactions of the Korea Information Processing Society
• /
• v.2 no.1
• /
• pp.106-118
• /
• 1995

In this work, the optimized design methodology in high-level synthesis related with scheduling and hardware allocation is developed by simulated annealing technique effectively modified . Applying this method to digital filter design, the optimized tradeoff problem of speed and hardware costs in pipelined digital filter case and array digital filter case are investigated. While, it is confirmed that the suggested method gives the improved cost function value faster and can be used in complicated digital filter design.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.210-212
• /
• 2009

In object tracking based on the particle filter algorithm controlling the proper distribution of the samples is essential to accurately track the target. If the samples are spread too wide compared to the target size, the tracking accuracy may degrade as some samples can be caught by background clutters that is similar to the target. On the other hands if the samples are spread too narrow, the particle filter may fail to track the abrupt motion of the target. To solve this problem we propose an improved particle filter that adopts "re-weighting" technique at the observe step. We estimate the distribution of the weights of the current samples by its mean and variance. Then the samples are re-weighted so that the appropriate distribution of the samples in proportional to the target scale is obtained at the next select step. The proposed tracking method can avoid convergence to local mean and improve the accuracy of the estimated target state.